

Fender Repair After an Accident
- Cause
- Scuff on the front left fender after an accident in a parking lot.
- Found
- Dent without paint damage, but with a crease in the metal.
- Done
- Pulled out and straightened the fender, painted with blending, polished.

Mercedes means precise body geometry and complex aluminum elements. A mistake in repair can cost not only appearance but also safety. At CARGID, we have masters with over 10 years of experience working with Mercedes. We guarantee precise geometry restoration and computer-accurate color matching. Warranty on work — 24 months. We will return your car to its factory look.
Restoration of geometry and paint coating of Mercedes body

We fix cracks and tears in plastic: soldering, reinforcement, sanding. The bumper holds its shape again and is ready for painting.

We straighten the dent with a special tool without touching the factory paint. The part retains its original coating.

We paint only the damaged area of the part with color matching. The transition is invisible, the factory paint around remains.

We prepare the plastic, apply primer and paint according to the code. The bumper gets an even color and protective varnish.

We sand, prime, and paint the fender with shade matching. The surface becomes smooth and matches the body color.

We treat the door: preparation, primer, paint, and varnish. The paint applies evenly, without runs or color mismatch.

We paint the hood with full surface preparation. The coating is heat-resistant and matches the body color.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
See real examples of Mercedes body restoration — you can clearly see what it was before and what it became after.
We will determine the exact cost after a free inspection. The price list is approximate; the final price depends on complexity.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Dent removal without painting | 2–3 hours | 24 mo | from 19 500 ₸ |
| Local part painting | 1–2 days | 24 mo | from 18 000 ₸ |
| Bumper painting | 2–3 days | 24 mo | from 25 000 ₸ |
| Fender painting | 2–3 days | 24 mo | from 35 000 ₸ |
| Door painting | 2–3 days | 24 mo | from 45 000 ₸ |
| Hood painting | 2–3 days | 24 mo | from 50 000 ₸ |
| Fender straightening | 4–6 hours | 24 mo | from 12 000 ₸ |
| Door straightening | 4–6 hours | 24 mo | from 15 000 ₸ |
| Bumper repair (cracks, tears) | 1–2 days | 24 mo | from 20 000 ₸ |
| Rocker panel replacement | 2–3 days | 24 mo | from 40 000 ₸ |
| Geometry restoration (frame machine) | from 2 days | 24 mo | from 80 000 ₸ |
| Anti-corrosion treatment | 1 day | 24 mo | from 30 000 ₸ |
| Body polishing (restorative) | 4–6 hours | 24 mo | from 31 000 ₸ |
| Raptor coating (full) | 3–5 days | 24 mo | from 250 000 ₸ |
| Full body painting | from 5 days | 24 mo | from 500 000 ₸ |
All work is performed in a spray booth with premium materials. Warranty on body repair and painting — 24 months. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We apply the base in two passes with interlayer drying, then varnish on top. A thick layer at once gives orange peel and runs, while two thin ones give an even gloss and color without spots.
If the varnish has not cracked, we straighten the metal with levers and hooks from the back side, heat with a heat gun to 60–70 °C. The paint remains original, the thickness gauge after repair shows the same microns.
We paint only the damaged area with a transition, not the whole part. One layer, drying and polishing the transition take from one day, and the adjacent elements keep their original paint.
We cover the base and clear coat: if clouding, orange peel or peeling happens due to our fault, we will repaint the area at our own expense.
We explain how Mercedes body restoration goes in our service — from the first call to the moment you pick up the car.

You leave a request on the website or by phone, we agree on a convenient time and book you for an inspection. You bring the car, we assess the damage, check the body geometry and hidden defects.
inspection and geometry check
We prepare a detailed estimate of work and parts, fix the deadlines and agree on everything with you. We select and order parts and materials — OEM or aftermarket, your choice.
estimate and parts of your choiceWe disassemble the damaged area, perform a second defect detection to identify hidden damage.
re-inspection for hidden damage
We perform straightening, welding and pulling — we restore the body geometry to factory parameters.
straightening, welding, pullingWe apply primer, paint and varnish in the paint booth with precise shade matching by color code.
booth and color by code
We assemble the car, perform quality control and hand it over to you with a warranty on the works.
quality control and warrantyWalk-ins welcome. By appointment — no queue.

Send a photo of the damage, the car make and year to WhatsApp. We will give you a price range, the timeframe and help you pick a booking time.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

We start Mercedes body repair in Almaty with an inspection and a written estimate, then try to keep as much of the factory finish as possible: we fix dents without cracked paint without painting, paint only the damaged area with a blend, and pull the geometry back on the frame machine. We give a 24-month warranty on body repair and painting, recorded in the work order.
A premium body forgives less: a mistake in material, coating thickness, or gaps shows right away and noticeably lowers the car's resale value later.
We start Mercedes body repair in Almaty with an inspection on the lift and a written estimate: we look at the impact zone from outside and underneath, check the gaps and openings, and note old repair marks. Work begins only after the owner agrees. When the damaged area is disassembled, the technician does a second inspection — that's the step where cracked mounts, bent brackets, and dents on inner panels turn up. We photograph every such finding and send it to the owner, and it goes into the estimate only after they agree. That way the final amount doesn't show up unexpectedly on pickup day. A service advisor handles the order: they approve the estimate, stay in touch during the repair, and answer questions right up to pickup. The body is handled by a dedicated technician, not a generalist who changes oil today and paints a fender tomorrow.
The factory finish is worth more than any repaint. So first we check whether we can skip paint entirely, whether a small area of the panel is enough, and what to do about cracked plastic.
If the clear coat hasn't cracked, we push the dent out from the back of the panel with rods and hooks, heating the metal with a heat gun to 60–70 °C to make it more pliable and prevent new creases. The original paint stays in place, and after the work the paint thickness gauge shows the same readings as before the impact. This is how we usually remove hail damage on the hood and roof, and parking dents on doors and fenders. There are limits. If the metal has a sharp crease, the clear coat is cracked, or the impact hit a body line, paintless repair will leave a wave, and the panel will still need filler and paint. So we make the call after inspecting under bright light, not from a photo. A dent left over the winter is harder to fix: moisture gets into the clear coat cracks, and corrosion starts under the paint.
| Situation | What we do | What stays factory |
|---|---|---|
| Dent, clear coat intact | Push out from the back | All paint on the panel |
| Scratch or chip on the edge of a panel | Paint the area with a blend | The rest of the panel and adjacent panels |
| Dent with a crease in the metal | Straighten, prime, paint the panel | Adjacent panels |
| Crack in a plastic bumper | Plastic weld, reinforce, paint | Mounts and bumper sensors |
| Torn metal | Replace the panel and paint | Adjacent panels |
A plastic bumper with a crack or tear doesn't always need replacing. We fix this kind of damage by plastic welding and reinforcing: we strengthen the seam from the inside, sand it down, and prep it for primer, after which the bumper holds its shape again and fits with even gaps. Before work, we remove the parking sensors, wiring, and brackets, and after painting we reinstall them and check the system. Replacement is the honest choice if the plastic is crumbling, the mounting tabs are broken, or the tear runs through the sensor holes: a seam there won't hold. We make the decision after removing the bumper, when we can see the condition of the mounts and the reinforcement behind it. We show the difference in time and result in the estimate, and the owner makes the choice. A repaired bumper gets the same paint job as a new one, in the booth and with a color match.
A color mismatch on dark colors and metallics is noticeable at first glance, and the only way to fix it is to repaint, so here color and layers matter more than speed.
We paint Mercedes in a spray booth, free of dust and drafts. We match the shade by the color code, then check it against the car itself: factory paint fades over the years, and the panel next to it has to match the current color, not the original. We apply the base coat in two passes with flash-off between them, then clear coat on top. One thick layer is faster but causes runs, orange peel, and blotches on metallics, while two thin layers lay down evenly and give a deep gloss. If only the edge of a panel is damaged, we paint the area with a blend, and the adjacent panels keep their original paint. When a blend on the panel won't look good, for example on a large flat surface like a door, it's more honest to paint the whole panel. Before reassembly, we put back the removed moldings, handles, and sensors so there's no paint on seals and rubber.
Even a minor impact can shift the body's reference points, and then new paint on a twisted panel won't save either the appearance or the way the car drives.
We repair a Mercedes body after a serious impact on a frame rack: the car is secured, and the technician restores the geometry to factory specs by straightening, welding, and pulling. The order here is critical. First the body reference points and openings are restored, then the bolt-on panels are fitted, and only then is the car painted. If you do it the other way around, the gaps won't line up, the doors will close with effort, and the fresh paint will crack on a twisted panel. We protect weld areas with anti-corrosion coating: an unprotected seam is the first to rust. We document the key stages in a photo report, and before pickup the technician checks the gaps and takes a test drive to make sure the car tracks straight and doesn't rattle. If a panel needs replacing rather than pulling after the impact, we discuss that before work begins.
The result of a repair depends not only on the technician's hands. The chosen part and how the timeline and warranty terms are written in the documents the owner receives at pickup matter just as much.
The owner decides which part to use: OEM, aftermarket, or their own. OEM fits the gaps and mounts most easily. Aftermarket sometimes needs on-site adjustment, and we include that time in the estimate right away so there are no surprises. You can bring your own part, but before installation the technician will check its geometry, rust along the edges, and signs of previous body filler. Important condition: a part supplied by the client is not covered by warranty; the warranty covers the work performed and the parts installed by CARGID. We show and return the removed parts to the owner, and we document the replacement in a photo report, so it's always clear what was changed. If a bumper can be saved by plastic welding and reinforcing, we'll offer that option alongside replacement and explain the difference in time and result. The owner makes the decision, and we record the chosen option in the work order along with the warranty period.
| Situation | How we handle it |
|---|---|
| Clear coat clouding caused by us | We repaint the area at our own expense |
| Orange peel, base coat lifting | We repaint the area at our own expense |
| Defect in a weld seam or panel straightening | We fix it under warranty |
| New accident after the repair | Not a warranty case, new estimate |
| Part supplied by the client | Labor is under warranty, the part is not |
| Third-party intervention | Warranty does not apply |
A premium body wins when as much of the factory finish as possible is kept, and every job is explained and agreed on in advance. Here's what's worth remembering before the repair.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost of Mercedes body repair in Almaty ranges from 18,000 tenge for local painting of an element to 80,000 tenge for complex restoration of body geometry with parts replacement. Several factors affect the price: the nature of the damage (scratch, dent, deformation), the need for welding, straightening, filling, the number and complexity of painting operations, as well as the Mercedes make and model. OEM parts cost more than aftermarket ones, which also increases the estimate. The exact cost can only be determined after a technician inspects the car and draws up a damage report.
The timeline for Mercedes body repair depends on the extent of the damage and the workshop's workload. Local repair (fixing a scratch or a small dent) takes 1–2 days. Restoring one door or fender with painting takes 2–3 days. If several elements need replacing, plus straightening and complex painting with color matching, plan on 7–14 days. For serious damage that throws off the body geometry and requires frame work, it can take 2–4 weeks. We give exact timelines after diagnostics and approval of the work plan.
Yes, all types of Mercedes body repair in our auto service are covered by a warranty of 24 months. The warranty covers the quality of the work performed: paint peeling, chipping, corrosion in the repair area, deformation of restored elements. We use certified materials and follow the technology, so we are confident in the result. If defects are found during the warranty period, we will eliminate them free of charge. The warranty does not cover damage received in an accident or as a result of improper operation of the car after repair.
An appointment is advisable so that we can allocate time and prepare a place for your car. You can make an appointment by phone or via messengers, choosing a convenient time for the inspection. On the day of the inspection, the master will assess the damage and calculate the cost and timelines. If repair is not required and only a consultation is needed, an appointment is not mandatory — you can come during the working day. However, during the season (spring–summer) there is a high workload, so we recommend booking in advance to avoid waiting.
Yes, you can bring your own spare parts, but we recommend agreeing on their condition and compliance with the model with the master before starting work. Some parts, especially body panels, must be of high quality and fit geometrically, otherwise the repair timelines will increase. As for consumables: paints, varnishes, fillers, primers — we use only professional materials, as the warranty requires quality control. If you provide your own materials, we cannot guarantee the durability of the coating. Therefore, it is better to entrust the materials to us.
Yes, we often deal with correcting poor-quality body repair performed at other services. We will carry out diagnostics and identify all defects: paint peeling, uneven color, dents, geometry distortion. The cost of correction depends on the complexity: removing a failed paint job followed by repainting an element will cost from 40 000 tenge per element, eliminating deformation with repeated straightening — from 12 000 tenge. We carefully prepare the surface and use the correct technology to achieve a factory look. The correction is also covered by a warranty.
Local repair means fixing damage in a small area (scratches, chips, small dents) without painting the whole element. It's faster (1–2 days) and cheaper (from 18,000 ₸), but if the damage is deep and covers a large area, local repair may not come out well. Element painting means painting the whole door, fender, or bumper for a perfect color transition. It takes 2–3 days and costs from 25,000 ₸ per element. Full body painting means painting the entire car, including door openings and hidden cavities. It's the right call for extensive corrosion or severe damage, takes from 5 days, and costs from 500,000 ₸. The choice depends on the car's condition and your budget.
During the first 2–3 weeks after painting, it is important to follow the recommendations: do not wash the car at automatic car washes with brushes, use touchless washing. Avoid aggressive chemicals and polishing. Do not allow mechanical impacts (scratches, chips) on the painted surface. After 30 days, it is recommended to visit the service for a check-up inspection and, if necessary, polishing. Also avoid prolonged exposure to direct sunlight and high temperatures (parking in the sun). Proper care will extend the service life of the new paint coating.
Payment for Mercedes body repair in our auto service is made after the work is completed and the acceptance certificate is signed. We accept cash, bank cards, and non-cash payment is also possible for legal entities. A 30% prepayment is possible to reserve time and order spare parts, if required, but the final payment is after the car is handed over. We provide a detailed estimate before starting work so that you know all costs in advance. Prices are fixed in the estimate and do not change during the repair without your consent.
Yes, we provide a warranty for the paint coating of 24 months. This is important because quality painting protects the body from corrosion and external influences. We use two-component paints and varnishes from well-known brands (for example, BASF, PPG) and follow the application and drying technology. If defects related to our work appear during the warranty period (peeling, clouding, cracks), we will eliminate them free of charge. The warranty confirms confidence in quality and protects your investment.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
I had the fender repaired on our Mercedes C180 after my wife hit a pole in the parking lot. I liked everything about the service: they assessed it quickly, gave an exact price and time frame. They did it in two days, matched the color perfectly, no one can tell there was an accident. Thank you for the work!
Dear CARGID! We had the driver's door repaired on a Mercedes E250, there was a strong impact, a dent appeared. They did everything quickly and with quality. They matched the color successfully, there is no difference at all. I am very satisfied with the level of service, I will recommend it to my friends!
I came on a friend's advice, I needed to remove a dent on the rear arch after hail. They did PDR, quickly and neatly. The price is reasonable, 70 000 tenge, in two days. The car is like new. I recommend it!
Replaced the front bumper on a Mercedes GLC. Everything was done precisely, on time, they brought the original part, painted it perfectly. The estimate over the phone matched the final one. Thank you for the quality!
I had body repair after an accident — fender replacement and painting. I liked that they explained every stage in detail and showed photos before and after. They met the deadlines, the quality is excellent. The price, of course, is not the lowest, but it is worth it.
I came with a corrosion problem on the sills of a Mercedes ML. The guys cut it out, welded in new metal, treated it with anti-corrosion. Now the car is like new, and it is not scary to look at the sills. Thank you for the honesty and quality!
Hood repair after hail. They did everything quickly, in two days, with quality. The price is normal, 70 000 tenge. The polishing is great, no traces left. I recommend this service!
My husband got into an accident in a Mercedes S500, the hood and fender were smashed. At CARGID they did everything possible: replaced the parts and painted with blending. They matched the color excellently, the car looks flawless. Thank you for saving our car!
I needed to repair the door after hitting a pole. They assessed the damage and said it could be done without replacement. They did it in three days, pulled it out, painted it. Everything is even, without traces. Excellent service, it is a pleasure to deal with professionals.
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.