We will restore the Audi body to factory geometry and perfect color after an accident, corrosion, or careless parking. We work with all generations of A3, A4, A5, A6, Q5, Q7, and other models. Dent removal, welding, three-stage painting — with a warranty on work of 24 months and precise color matching by code.
Current prices for main services for Audi in Almaty.
Service
Duration
Warranty
Price
Polishing of one part
1–2 hours
24 mo
from 8,000 ₸
Paintless dent removal (1 dent)
1–3 hours
24 mo
from 19,500 ₸
Local painting (scratch)
3–5 hours
24 mo
from 12,000 ₸
Bumper painting
1–2 days
24 mo
from 25,000 ₸
Fender painting
1–2 days
24 mo
from 20,000 ₸
Door painting
1–2 days
24 mo
from 25,000 ₸
Hood painting
2–3 days
24 mo
from 30,000 ₸
Roof painting
2–3 days
24 mo
from 30,000 ₸
Full body painting
from 5 days
24 mo
from 250,000 ₸
Straightening of 1 part
from 3 hours
24 mo
from 15,000 ₸
Straightening with painting (1 part)
1–2 days
24 mo
from 30,000 ₸
Rocker panel replacement
1–2 days
24 mo
from 25,000 ₸
Rocker panel repair with welding
2–3 days
24 mo
from 40,000 ₸
Wheel arch restoration
1–2 days
24 mo
from 20,000 ₸
Undercarriage anti-corrosion treatment
1 day
24 mo
from 45,000 ₸
Anti-corrosion treatment of hidden cavities
2–4 hours
24 mo
from 25,000 ₸
Hood soundproofing
2–3 hours
24 mo
from 15,000 ₸
Body geometry restoration
from 3 days
24 mo
from 80,000 ₸
The exact cost depends on the condition of the car and the materials chosen. We prepare the final estimate after a free inspection. Warranty periods — see the page «Warranty»
06
Why Audi Owners Trust CARGID with Their Body Repair
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
24MO
warranty on labor — the term is stated in the work order.
Painting in a booth with drying
Color matching by code
Inspection and estimate free
01
Dents fixed without painting
We push out small dents from the inside with levers without touching the factory clear coat. The original paint stays intact, and the panel does not need repainting.
02
Polishing in 3 stages
One part: abrasive, paste, anti-hologram. Machine at 1500 rpm — we remove the mark without burning through the paint to the primer.
03
Repair in 2-3 days
Sill with welding, painting, and assembly fit into 2-3 days. We paint in a chamber with drying at 60 degrees — we don't deliver under-dried work.
04
24-month warranty
24 months on painting and the welded seam. We cover blistering, peeling, and cracks along our seam — no arguments, no extra charge.
07
How Audi Body Repair Works
Steps.
We explain how Audi body repair goes in our auto service — from the first call to the moment you pick up the car.
01
Inspection and Defect Detection
You submit a request on the website or call us, we schedule you for a convenient time and provide the address. Upon arrival, a technician inspects the car, identifies all damages, and records them in a report.
damage report
02
Parts Ordering
We calculate the cost of work and parts, agree on the estimate with you, and sign a contract. If new parts are needed, we order original or aftermarket ones — with your consent and considering the timelines.
estimate and parts to choose from
03
Body Repair
Mechanics perform straightening, welding, replacement of elements, and surface preparation for painting.
straightening, welding, replacement
04
Painting and Drying
We apply primer, paint, and clear coat in a chamber with temperature and humidity control, and dry the coating.
booth, temperature control
05
Assembly and Polishing
We install the parts back, adjust the gaps, polish, and apply protective compounds.
gaps and polishing
06
Vehicle Delivery
We conduct quality control together with you, issue a warranty card, and sign the acceptance certificate.
We do Audi body repair in Almaty on all generations, from A3 to Q7: we remove dents without painting, weld sills, replace panels, paint by color code in the booth, and polish in three stages. We record the damage in a report, agree on the estimate before work, and put the 24-month warranty in the work order.
Audi galvanization and where rust comes from
Audi bodies have been galvanized for a long time, so through corrosion is less common than on mass-market cars. But it doesn't disappear entirely and shows up in predictable places.
Where zinc stops protecting the metal
Zinc protects steel as long as its layer is intact. Rust starts where the coating has been chipped by a stone, a hit, or careless repair: on the front edge of the hood, at the bottom of the doors, on the arches and sills, around weld seams from previous part replacement. On cars that have already been in a body shop, corrosion often comes from under old body filler applied to bare metal without primer. Our Audi body repair starts with an inspection of such places on the lift, not just the dent you came for. We open up swollen paint during the inspection: under a blister there may be pinpoint rust, or there may be a through hole, and the scope of work in these cases is incomparable. A chip down to metal should be sealed immediately, before the source spreads under the paint and starts creeping across the panel.
Signs of previous repair on a used Audi
Panel gaps: uneven gaps at the hood, fenders, and doors indicate replacement or straightening of parts after a collision.
Color difference: in daylight at an angle, a repainted part looks slightly darker, lighter, or has a different metallic flop.
Clear coat texture: noticeable orange peel, runs, or dust in the clear coat on one part reveal painting outside the factory line.
Signs of masking: paint on rubber seals, moldings, and plastic shows the part was painted without disassembly.
Rounded bolt heads: tool marks on fender, hood, and door hinge bolts mean the parts were removed or replaced.
Coating thickness: a thickness gauge will show a layer of body filler where everything looks smooth, and it's better to know that before the estimate.
Aluminum and steel in Audi body repair
An Audi body is often assembled from different materials. The repair method depends on what the damaged part is made of, so we determine the material during the inspection.
Straightening is limited; replacement is more common for creases
Plastic
Light part, flexible to the touch
Soldering cracks, restoring mounts
Composite and fiberglass
Does not bend, layered at the break
Repair with resin or replace the part
When we straighten and when we replace a panel
Audi body repair starts with the decision to straighten or replace the part, and we make that decision during the inspection together with the owner. A dent with intact clear coat on a steel panel is pushed out with levers from the inside without touching the factory coating—the part keeps its original paint. If the metal is stretched, there is a crease, or the clear coat is cracked, straightening followed by painting is needed. Aluminum behaves differently: it tolerates repeated straightening worse, and with a deep crease it is more economical to install a new panel than to fight cracks. Parts heavily crumpled in an accident are also replaced, and the new panel is fitted by gaps to adjacent elements. The choice of part is yours—OEM, aftermarket, or your own part—and we record the decision in the estimate before work begins.
Welding and geometry after a serious impact
If the impact affected structural elements, replacing a panel alone is not enough: the geometry needs to be checked and restored on a frame machine. Many owners know the signs of misalignment—the door closes hard, panel gaps taper, the car pulls to one side on a flat road. We secure the body on the frame machine, pull it to control points, and only then install the bolt-on parts; otherwise the gaps won't line up. Rusted or torn sections of the sills are cut out, new metal is welded in, seams are cleaned and covered with anti-corrosion protection. A sill with welding, painting, and assembly usually takes 2–3 days. A weld seam without protection starts rusting first, so anti-corrosion treatment at the weld site is mandatory even on a galvanized body.
What hides behind the bumper after a hit
The bumper takes the hit first, and behind the plastic on an Audi there are many parts not visible from the outside. A small crack on the surface sometimes hides broken mounts, sensors, and a bent reinforcement bar.
What we check behind the bumper
Parking sensors: we check their housings, brackets, and wiring, because a broken sensor bracket gives false signals even with an intact bumper.
Bumper reinforcement: the metal beam behind the plastic absorbs the impact, and its deformation changes the bumper fit and gaps.
Headlight mounts: modern Audis have complex optics, and a torn mounting tab causes the headlight to shake and the beam to be misaligned.
Washers and grilles: headlight washer nozzles, grilles, and moldings break easily during removal, so we disassemble them carefully.
Brackets and clips: plastic mounts along the edges of the bumper are responsible for a even joint with the fenders.
Repair the bumper or install a new one
We usually repair a crack and a torn mount on a plastic bumper, but a tear with missing pieces of plastic is a reason for replacement. We remove the bumper completely: this way we can see what happened to the reinforcement, sensors, and headlights, and the plastic can be repaired from the inside. We prepare the repaired bumper for painting, paint it to match the body color, and install it with a check of gaps and sensor operation. If the bumper has already been repaired several times and has a lot of body filler, we honestly say that replacing the part is more reliable. A new bumper also needs to be painted and fitted, so we make the decision based on the condition of the part, not on habit. We record the repair option and its scope in the estimate before work begins.
Color and gloss without mismatch
Audi metallics and pearls are tricky to match. A color difference is immediately visible if a panel was painted without considering the adjacent ones, so we prepare the color for the specific car, not by a chart.
Color matching and blending into adjacent parts
Audi body repair in Almaty, when it comes to painting, starts with the paint code, but the code is only a starting point. Over years of use, the factory paint fades, and the same color differs between batches, so we check the shade on a sample next to the part in daylight. If a difference remains, we do a smooth blend into the adjacent part with base coat and clear coat so the boundary is not visible to the eye. We paint in a spray booth with hot drying: the coating gains strength before delivery, and you can pick up the car without risk of leaving marks on fresh clear coat. Before painting, we sand, prime, and degrease the part, and cover adjacent elements from dust and paint mist. It's best to inspect the work during the day, looking at the part at an angle together with the technician.
Three-stage polishing
Abrasive stage: we remove scratches, small scuffs and orange peel without burning through the clear coat down to the primer, so we constantly watch the RPM and pressure.
Paste: we level the surface after the abrasive stage, remove dullness and sanding marks, and bring back the depth of the color.
Anti-hologram: the finishing compound removes holograms and circular swirl marks that show up on dark Audi colors in the sun.
When it's needed: after painting a part, for scuffs and small scratches that haven't reached the primer, and for dullness on old clear coat.
What to expect: the gloss comes back on the whole part, but polishing won't remove deep chips down to the metal — those get touched up.
Paperwork and warranty for Audi body repair
Body repair results show up over months, not on the day you pick up the car. That's why it matters what damage, work and warranty terms are written down before the repair starts and when the car goes back to the owner.
What we document before and after the work
At check-in, the technician records all body damage in the report, including small chips and signs of previous repairs, so new problems don't get mixed up with existing ones. We agree on the estimate before work starts: it lists the operations, parts and the chosen parts option. If hidden damage turns up after disassembly, we stop the work and agree on changes with the owner. At key stages we take a photo report, and we show and hand over the removed parts so you can see what was replaced. The service advisor manages the work order from check-in to handover, so all questions go through one person. Before handover we check gaps, locks and sensors, and the owner can inspect the body with the technician in daylight. We're open daily from 09:00 to 20:00, by appointment with no waiting in line. Keep the report and work order until the warranty ends: with them, a warranty case gets resolved quickly.
What the 24-month warranty covers
warranty and non-warranty cases for bodywork
Situation
Warranty
Bubbling or peeling paint on a part we painted
Covered, we repaint free of charge
Crack or rust along our weld seam
Covered, we fix it free of charge
Color mismatch caused by us
Covered, we correct the paint
A new accident after the repair
Not covered
A part brought in by the client
The part itself is not covered
Interference by third parties
Not covered
Rust, past repairs and warranty on an Audi body
An Audi body lasts a long time, but any damage to the protective layer will eventually make itself known. Here's what an owner should keep in mind before and after a repair.
Rust: on a galvanized body it starts from chips and old filler, so chips down to the metal get sealed right away.
The car's past: gaps, shade and clear coat texture give away previous repairs, and it's best to note them in the report before work starts.
Part material: steel is straightened and pulled, aluminum with creases is more often replaced, and plastic is soldered and restored.
Bumper: after an impact we check the reinforcement, sensors and headlight mounts, even if only a scratch is visible on the outside.
Color and paperwork: the shade is matched against a sample, and the warranty terms must be written in the work order and report.
10
Questions About Audi Body Repair
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The price depends on the type and area of damage, the number of parts and whether elements need replacing — OEM or aftermarket. Per our price list, polishing one part starts at 8,000 ₸, bumper painting at 25,000 ₸, and body geometry restoration at 80,000 ₸. We give the exact amount after inspection and fix it in the work order before work starts.
The timeline depends on the scope of work and parts availability. We remove a dent without painting in 1–3 hours, paint a bumper, fender or door in 1–2 days, and repair a sill with welding in 2–3 days. Repair after an accident with parts replacement and geometry takes from 3 days; we give the exact schedule before work starts.
Body repair, painting, anti-corrosion treatment and geometry restoration on an Audi come with a 24-month warranty. It covers paint bubbling and peeling, cracks and corrosion along our seam — we fix such defects free of charge. The term and conditions are recorded in the work order and the completion report.
Yes, preliminary booking is needed: first we inspect the car and draw up a defect list. Then we agree on the scope of body work — from local painting to replacement of elements — and only after that we set a date. The term depends on the workshop's workload and availability of parts for the specific Audi model.
Yes, you can bring your own parts if they match your Audi by catalog number. The warranty covers our work, but not the part you bring. We mix the paint and clear coat ourselves using the color code so the shade matches and the finish holds up.
Contact us within the warranty period: a technician will inspect the car, and diagnostics for a warranty case are free. If the defect is our fault, we will redo the painting or straightening free of charge. When you pick up the car, inspect it together with the technician and keep the work order.
Local repair fixes only the damaged area — a dent, chip, or scratch — and preserves the factory paint on the rest of the part. It's faster, but on bright and metallic colors a visible transition is possible. Full part painting gives an even finish without transitions, so for large or numerous defects we paint the whole part.
For the first two to three weeks, it is not recommended to wash the body with high pressure or apply wax or polish — the coating needs time for final curing. During this period, it is better to limit to careful hand washing without abrasive agents. Then normal care: timely washing, treatment of sills and arches, inspection of joints after winter operation.
You can pay for body repair in cash, by bank card or by bank transfer to the service account; for legal entities, payment by invoice is available. The final amount depends on the scope of work, cost of parts and materials, as well as the condition of hidden damage revealed after disassembly. We fix the exact cost in the estimate before starting repair.
Yes, we restore Audi body geometry on a straightening bench after serious accidents when the dimensions of openings, side members, or structural elements are off. After pulling, we check control points against factory dimensions and show you the measurement results. Cost starts from 80,000 ₸; the final price depends on the model and the extent of damage.
11
Reviews from Audi Owners
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Aigerim
I got into an accident in my Audi Q5, the front fender and bumper were crushed. I went to CARGID on a friend's advice. The guys did everything quickly, in 4 days. The price was 320 thousand, which suited me, as other places quoted more. The car is like new, the color matches, the gaps are excellent. Thank you!
Dmitry
A dent appeared on the door of my Audi A6, I thought I would have to repaint the whole door. At CARGID they suggested repairing without painting, it cost 45 thousand. They did it in a day, the result is excellent, you can't even see where the dent was. Very satisfied, I recommend!
Yerlan
I scratched the bumper of my Audi A4 on a curb, came to CARGID. They painted the bumper in 2 days, the price was 38 thousand. The color was matched perfectly, no differences. Thank you for the work!
Nurzhan
My Audi Q7, the fender was crumpled in an accident. I went to CARGID, they replaced the fender, painted it, all in 3 days. It cost 210 thousand. The quality is super, the color matched. I recommend!
Olga
Rust appeared on the wheel arch of my Audi A8, unpleasant. At CARGID they did everything professionally: cut out, welded, painted. It took 5 days, the price was 95 thousand. The car now looks great, thanks to master Alexey for his patience and advice.
Ivan
The hood of my Audi A3 had chips, stones were flying from the highway. At CARGID they touched up the chips and covered with protection for 28 thousand. They did it in a day, and now the hood looks much better. Thank you!
Dinara
My poor Audi A4, a dent appeared on the rear door. I took it to CARGID, they repaired it quickly and with quality. Finished in 2 days, cost 55 thousand tenge. The color matched exactly, no spots. Great work!
Vladimir
Audi A6, I needed to paint the rear wing after a minor accident. At CARGID they did it in 3 days, 134 thousand. The paint quality is excellent, the color was matched, all results are flawless. Thank you!
Sergey
Serious accident in Audi Q7: fender, door and sill were damaged. At CARGID they calculated the estimate — 400 thousand, did it in 7 days. I was very worried about the color and gaps, but everything was done perfectly. The car looks like it came from the factory. Thank you for the professionalism!