We'll help you select auto glass precisely by make, model and VIN code: windshield, side or rear. We check compatibility with your car, take into account the presence of sensors, heating and cameras. We'll deliver the glass to the service within 1-3 days and install it with a warranty of 12 months.
We'll find the glass precisely by VIN, make and model of your car, taking into account the year of manufacture and trim level.
Service
Duration
Warranty
Price
Windshield selection by VIN (reference, without inspection)
30 minutes
12 mo
from 1 000 ₸
Side glass (front/rear) selection by make and model
from 1 hour
12 mo
from 1 500 ₸
Rear glass selection with and without heating (passenger cars)
from 1 hour
12 mo
from 2 500 ₸
Windshield selection with sensors (rain/light), with camera
from 2 hours
12 mo
from 3 000 ₸
Glass selection for crossovers and SUVs (windshield, side, rear)
from 2 hours
12 mo
from 3 500 ₸
Glass selection with acoustic tape (sound insulation)
from 2 hours
12 mo
from 3 500 ₸
Tinted glass selection (factory tint, with gradient)
from 2 hours
12 mo
from 4 000 ₸
Heated glass selection (windshield, wiper area)
from 2 hours
12 mo
from 4 000 ₸
Glass selection for commercial transport (Gazelle, vans)
from 2 hours
12 mo
from 5 000 ₸
Glass selection with HUD projection (for windshield)
from 3 hours
12 mo
from 5 500 ₸
Express auto glass selection (within a day)
from 4 hours
12 mo
from 6 000 ₸
On-site selection (selection at location, with vehicle inspection)
from 3 hours
12 mo
from 7 000 ₸
Glass selection with sound insulation (acoustic package)
from 3 hours
12 mo
from 7 500 ₸
Glass selection for premium-class cars (Mercedes, BMW, Lexus)
from 1 day
12 mo
from 10 000 ₸
Glass selection with E-marking (Euro standard), original/aftermarket
from 1 day
12 mo
from 12 000 ₸
Glass selection with delivery in Almaty (within city limits)
from 1 day
12 mo
from 15 000 ₸
The exact cost depends on the make, model, type of glass and its availability. The final price is fixed after selection and approval. Warranty periods — see the page «Warranty»
06
Why drivers choose CARGID for auto glass selection
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
12MO
warranty on labor — the term is stated in the work order.
Delivery 1-3 days
Original and aftermarket
Warranty of 12 months
01
VIN selection in 15 minutes
We check the configuration by VIN: verify the shade, dimming zone, and sensors. An error in the number — the glass will sit crooked or won't adhere to the sealant.
02
Adhesive in 2 layers
We apply primer and polyurethane sealant with a triangular bead along the frame. The bead holds the glass during airbag deployment and doesn't let water into the cabin.
03
4-hour drying before departure
The sealant cures at room temperature, so we release the car after 4 hours. Early departure shifts the glass and breaks the bead.
04
12-month warranty
We cover leaks along the bead and sealant detachment. If water or whistling at speed appears — we re-glue at our own expense.
07
How we select auto glass
Steps.
From request to installation — 6 steps, each under the master's control.
01
Inspection and measurement
You submit a request on the website or by phone, stating the make, model, and year of the vehicle. The master inspects the opening, takes dimensions, and checks the type of glass mount.
request on WhatsApp
02
Analog selection
We select original glass or a quality analog taking into account the year of manufacture. We state the exact cost of glass and work, without hidden fees or surprises.
inspection and diagnostics
03
Order and delivery
We order glass from trusted suppliers, delivery to Almaty — from 1 day.
estimate before work starts
04
Inspection upon receipt
We check the glass for chips, cracks, and compliance with the order before installation.
work to factory procedure
05
Installation and sealing
We remove the old glass, clean the opening, install the new one, and seal the seams.
result check
06
Handover and warranty
We provide a 30-day warranty for selection and installation, you accept the work in your presence.
CARGID selects auto glass in Almaty by VIN in 15 minutes: we match the tint, shade band, sensors and options to your trim level, not just the make and year. We offer OEM or aftermarket at the customer's choice, install with primer and sealant in 2 layers, and give a 12-month warranty recorded in the work order.
What auto glass selection includes and how it differs from replacement
Selection and replacement are two different jobs. The first makes sure the part fits your exact trim level, the second covers installation and sealing. Here's what each one includes and when you only need the first.
What the selection service includes
For us, selection means checking by VIN, verifying compatibility with the factory trim level, and agreeing on OEM or aftermarket before ordering. The technician pulls up the trim level by the body number, checks the tint, shade band and sensor mounts, then shows you the suitable options: OEM, aftermarket, or customer-supplied parts — the owner decides. We do auto glass selection in Almaty by VIN when the body number is at hand. If the customer brings their own glass, we still check it: we verify the number and options so we don't install a part that won't seat on the sealant or won't match the sensors. This check saves a repeat order, a second installation and extra trips to the shop, and the service advisor tracks the work order through to vehicle pickup.
How selection differs from replacement
Selection is figuring out the right part for the trim level, while replacement is removing the old glass, applying primer and polyurethane sealant, then letting it cure. During the check we verify the tint, shade band and rain or light sensor so the part matches the body and electronics. Replacement is physical work: cut the old bead, clean the frame, apply adhesive in two layers with a triangular bead, and let it cure for at least four hours at room temperature. A mistake at the selection stage can't be fixed with careful installation — a part with a different shade band or without the right sensor mount simply won't sit right, and the sealant will go on unevenly and start letting water into the cabin. Leaving the shop too early shifts the bead and breaks the seal.
When selection is enough and when you need replacement
Glass is intact, you want an option: we select a part with heating, acoustic film or tinting for your trim level, and installation is up to the owner.
Small chip outside the wiper zone: often repairable without replacement, no new part needed.
Crack in the driver's field of view: we select a new part right away, because repair here doesn't give the needed optics and distorts the view.
Chip with spreading rays or a crack longer than a few centimeters at the edge: a new part is needed — don't wait, the crack grows with temperature changes.
Delamination on laminated glass: we select a replacement, edge repair won't restore the glass's strength or its seal.
How to select a windshield by VIN and why selection by make falls apart
The factory body number holds more information than the make and model year. Here's what glazing parameters it reveals and why it's easy to over-order a part without this check.
What exactly we check by VIN
Trim level parameters we check before ordering
What we check
Why it matters
Glass tint
Match the factory cabin tone
Shade band
Keep visibility without glare
Rain and light sensor
Fit the factory mount
Lane Assist camera
Not disrupt the assistant's calibration
Heating elements
Match the wiring and connector
Why glass chosen by make and year may not fit
Make and year don't describe the trim level, so a part selected by model alone may differ in shade band, sensor mount or tint. The same body rolls off the line with several glazing variants — depending on the sales market and option package. A version with a rain sensor needs a pad for the sensor, and a version with a Lane Assist camera needs a window for the lens in the upper zone. Externally these windshields are almost indistinguishable, but their mounting points and connectors are different. A warehouse seller only sees the model and year, not your factory build. It's more reliable to check the body code once than to re-order the part twice and pay for a second removal.
Where to find the VIN and how to order selection remotely
The factory number is on the registration certificate, on the body pillar and under the windshield; for remote selection, a photo of the plate and a photo of the old glass are enough. Send the photos in a messenger and we pull up the trim level from the database: dealer scanners cover 40+ makes, so we check options against the factory, not a seller's catalog. We do auto glass selection in Almaty by VIN when the characters are clearly legible — photograph the plate in daylight, without glare. If you send a photo of the marking on the old glass, we'll compare it with the body code: that shows whether the part matches the factory build or was already replaced with an aftermarket one. The same photo shows what glass was actually on the car: the marking shows the actual code. Then we give you the options and timelines, and the decision is yours.
OEM or aftermarket auto glass for your trim level
Choosing between the factory part and its replacement isn't just about budget. Here's how they differ in fitment and what to check before ordering.
How OEM differs from aftermarket
An OEM sample matches the factory part in tint, sun band, and options, while an aftermarket one may differ in these depending on the manufacturer. OEM glass is made of laminated glass — two layers with a film between them that holds the shards together on impact; a budget option is sometimes made of tempered glass, and it behaves differently when damaged. The OEM tint matches the body batch, so the part doesn't stand out from the overall look. The sun band along the top edge on different brands can be wider or narrower than stock, and the tint layer lighter. Options differ too: a window for the rain sensor, heating filaments in the wiper rest area, and an acoustic film aren't on every inexpensive option. The difference shows up not on day one but in the small things — for example, an aftermarket part without the right band causes glare in the mirrors or heats worse. So before ordering, decide what matters more — OEM or aftermarket auto glass — and check that choice against your car's trim.
How to choose an aftermarket part that fits your trim
Tint and shading: we compare with the factory glass so the new part doesn't differ in color from the side and rear windows.
Sun band: we check the width of the band along the top edge — it determines whether the sun glares in the mirror.
Sensor mount: we check whether there's a window for the rain and light sensor, otherwise the automatic features stop working.
Heating filaments: we count the zones and filament layout — some options have heating only in the wiper rest area.
Acoustic film: we confirm whether there's a sound-insulating layer if the factory trim had one.
Warranty on OEM and aftermarket
The 12-month warranty applies to both the OEM sample and its replacement — it covers the work performed and the parts installed, and we record the term and conditions in the work order. Diagnostics for a warranty case are free with us, and we do a test drive before handing over the car. We fix the terms in the work order and the completion certificate at pickup. The warranty doesn't cover glass the customer brought themselves or normal wear of consumables — keep that in mind if you're choosing between buying your own and ours. If we install a part we sourced, we're responsible for it just like an OEM one, and we replace it under warranty for a manufacturing defect. In my view, the savings from buying it yourself rarely outweigh the risk of losing the warranty on installation.
Glass with options and for different vehicle types
Options are matched to the trim and wiring diagram, not by eye. Below is what can be installed and how it works for different vehicle types.
Heating, acoustic film, and tint
option comparison and what goes wrong if you skip the check
Option
What we check by VIN
What happens if you don't verify
Wiper area heating
Presence of the connector and fuse
Heating won't connect
Acoustic film
Tint and film layer
Different noise level in the cabin
Factory tint
Tint percentage per trim
Mismatch with the other windows
Sun band
Band position and width
Band ends up not at eye level
Camera and sensors after installation
If the glass has a Lane Assist camera, after installation we check it on a dealer scanner — the camera mount and position must match the factory ones, and if needed we send it for calibration. We have dealer scanners for 40+ brands, so we check the camera on site, without trips to the dealer. The rain and light sensor also sits in a separate window of the part, and its position is set by geometry, not settings. A part with a different camera window throws off its position, and the system may show errors — so we verify the camera window by VIN before ordering, not after installation. To match a windshield by VIN, the body number is enough: we use it to pull the trim and verify the camera window. We also confirm which assistants are active in the trim: sometimes the camera wiring is there but the system isn't programmed.
Crossovers and commercial vehicles
For crossovers and commercial vehicles we match the part by VIN and by cab — on truck models the trim often isn't tied to the number the same way as on passenger cars. On crossovers, the pillar angle and opening height come into play: a part from a similar model fits with a gap at the frame. On commercial vehicles, dimensions and cab mounting matter, and we check the old part's marking by hand — it's more reliable than the catalog. Our shop has handled 9,000+ vehicles over 12 years, and on trucks the discrepancies most often come up on the marking. For vans and minibuses we separately confirm the number and spacing of the mounting holes for the molding, because they differ on facelifted cabs. So before ordering we ask for a photo of the old part with its number and a general view of the cab — that clears up half the geometry questions and saves a second visit.
Installation, curing, and warranty after matching
After matching, the glass has to be installed correctly and the sealant given time to set. Here's how installation goes and what you get at the end.
How installation goes and why 4 hours of curing
We apply primer and polyurethane sealant in 2 layers with a triangular bead around the frame, and we hand over the car after 4 hours — the sealant cures at room temperature. We put the removed moldings and seals back in place, check the fit by how even the gaps are, and test the window regulators. Before handover, the service advisor does a test drive: he listens for squeaks over bumps and checks whether water seeps along the frame after the first contact with moisture. We take a photo report of the key installation steps so you can see how the adhesive layers went down and what condition the frame was in before installation. Driving off early shifts the part and breaks the bead — so 4 hours of curing isn't overcaution, it's the condition under which the glass holds when the airbag deploys and doesn't let water into the cabin.
How to check the glass at pickup
Chips and cracks: inspect the surface against the light from both sides — damage on the edge is more dangerous than in the center and can spread.
Marking: check the part number and manufacturer logo against the work order so the warehouse doesn't mix up the version.
Tint and sun band: check the band at the top and the tint across the whole area — it must match the factory trim.
Options: make sure there's a pad for the camera, the rain sensor, and the heating filament if the VIN code calls for them.
Fasteners and moldings: check that the clips and trim pieces around the perimeter are there — without them the part sits crooked or leaves a gap.
12-month warranty and what to do if there's a problem
We give a 12-month warranty on glass. The term and conditions are recorded in the work order and the completion certificate, and diagnostics for a warranty case are free. It covers our work and the parts we install: if a seam leaks or a fitment defect shows up, we sort it out at no charge, and reinstallation is part of the same case. The warranty does not cover an accident after the repair, third-party interference, or a part the customer brought in. If there's a problem, come in any day from 09:00 to 20:00 — the service advisor will take the car and open a work order, and with an appointment you'll be seen without waiting in line. Keep the certificate: it's where the term is recorded, and it makes it easier to prove the case is a warranty one and not the result of outside impact.
How VIN matching and trim keep the seal
Choosing glass solves two problems — matching the trim level and keeping the seal after installation. Here's a quick summary of what determines the result.
Selection and replacement are different jobs: selection ends with an exact part number and a verified trim level; replacement starts with primer, adhesive, and curing.
VIN is more accurate than make and year: matching the trim by body number rules out mistakes in tint, shade band, and sensors that aren't visible when identifying by model.
An aftermarket part is matched by trim, not by price: a cheap part without the right mounts and connectors won't sit on the frame or connect to the wiring.
Options are checked against the wiring and mounts: heating, acoustic tape, and a camera require matching connectors, otherwise the unit stays non-functional.
Curing and warranty are documented: four hours of polymerization and the warranty term in the work order protect you from a shifting seam and disputes.
10
Frequently asked questions about auto glass selection in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
In our service, auto glass selection is a separate service, and its cost is 5000 tenge. This price includes diagnostics: we inspect the glass, determine its type, the presence of sensors, heating, and also select the exact aftermarket glass by VIN number. The final cost of the glass itself depends on the make and model of the car, year of manufacture, type (windshield, side, rear), presence of additional options (rain sensor, camera, heating) and manufacturer brand (original or aftermarket). We provide the exact cost after selection, before starting work. Exact prices are in the price list on this page.
Usually selection takes from 30 minutes to 2 hours if the glass is in stock with our suppliers in Almaty. If the required glass is not in the city, we order it — this takes from 2 to 7 days, depending on the rarity of the model. Side and rear glasses are more often in stock, windshields with sensors and cameras may take longer. We always agree on the timelines with you before starting work so that you can plan your time.
Yes, we provide a warranty for auto glass selection and installation — 12 months. The warranty covers the tightness of installation, absence of leaks, correct operation of sensors and heating, as well as the quality of the glass itself (if it is not original, then according to the manufacturer's warranty). If during the warranty period problems arise due to our fault, we will fix them free of charge. The warranty does not apply to mechanical damage (chips, cracks) due to external impacts.
An appointment is desirable but not mandatory. You can come to our service without an appointment, and we will try to accept you within 15-20 minutes if we have openings. However, to guarantee a consultation and quick selection, we recommend calling and making an appointment at a convenient time. This will allow us to prepare and reduce your waiting time. Glass selection and replacement takes about 2-3 hours, so it's better to plan your visit in advance.
Yes, you can bring your own glass, and we will perform its selection (check compatibility with your car) for 5000 tenge. But if you plan to install it, we recommend purchasing the glass from us, as we provide a 12-month warranty on it, and you will be sure of its quality and correct selection. If you bring your own glass, we are not responsible for its condition and possible defects, and the installation warranty will be limited to the absence of leaks and correct operation of sensors.
If you find that the glass was selected incorrectly (for example, it doesn't fit the mounts, sensors, or dimensions), contact us immediately. We will perform a free re-diagnosis and replace the glass with the correct one if the mistake was ours. Provided that installation has not been performed, we will refund the cost of the selection service. If the error is discovered after installation, we will fix it at our own expense within the warranty. It is important not to try to fix the problems yourself, as this can damage the glass or the body.
The original glass is produced by the same factory as for the automaker's assembly line. The difference is in price and sometimes in nuances: aftermarket glass may have a different tint, less quality optics, but with correct selection it fully performs its functions. We recommend aftermarket glass for older cars or on a limited budget, but we always warn about possible differences. Exact prices are in the price list on this page.
After installing a new glass, within 48 hours it is not recommended to wash the car and subject the glass to strong loads (for example, strong water pressure, driving off-road). This is necessary for the adhesive sealant to fully dry. Also, do not use an automatic car wash immediately. After 2-3 days you can wash as usual. Try not to turn on the glass heating at full power at first to avoid creating a temperature difference. After a week, it is recommended to check the tightness and, if necessary, tighten the seals. Otherwise, the glass requires no special care.
Glass selection is paid after agreeing on the part number: by card, transfer, or cash at the service. The cost depends on the glass brand, presence of heating, sensors, and moldings, so the invoice is generated for the specific item. If the required part number is not in stock, payment is made upon confirmation of the delivery date.
Yes, we perform remote selection. To do this, send us a photo of the car's VIN number (or provide the make, model, year, and trim level) and a photo of the old glass. We will determine suitable options and contact you for approval. Remote selection costs the same — 5000 tenge, this money will be credited toward installation. However, for accurate diagnostics and checking all sensors, it is better to come to the service, as remotely we cannot guarantee 100% match. You can also come to us, and we will do everything on site.
11
Reviews of auto glass selection and installation
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Alexey
Sportage
I contacted CARGID for windshield selection on a Kia Sportage. The technician looked at it and immediately said which aftermarket glass was better to take, didn't push the original. The price came out to 58 000 tenge with labor. They installed it in a day, neatly and cleanly. I've been driving for a month now, everything is great.
Dmitry
Toyota Camry
I broke the side window on my Toyota Camry and thought I'd have to wait a week. Here they found the glass in an hour and delivered it the next day. Installed quickly, 22 000 tenge, glass with heating, just like it was. Thanks for the speed and fair price!
Serik
The car is a Honda Civic, the windshield had a chip, so I decided to replace it. I called, made an appointment, arrived — and two hours later I drove off with a new glass. They selected an aftermarket glass with sound insulation, and the cabin became quieter. The price is 45 000, even cheaper than at the dealer.
Aigul
It was a disaster: a stone hit on the highway, and a crack started spreading. I came to the service, they explained everything and selected a glass for a Nissan X-Trail. Installed in a day, 62 000 tenge, with a rain sensor. I've been driving for six months now, no problems. Thank you!
Vladimir
In winter the windshield froze, the heating didn't work. Turned out the glass wasn't heated. They selected one with heating elements and ran the wiring, everything works great. The price is 78 000, it took three days, but the result is worth it. I recommend!
Olga
I have a Volkswagen Tiguan, the panoramic roof cracked due to temperature changes. I thought only the official dealers could do it, but here they selected tinted glass and replaced it in 2 days. 120 000 tenge, but cheaper than at the dealer. Thanks for the care and quality!
Ruslan
I ordered a windshield for a Mazda 3, needed one with heating and a rain sensor. The technician selected an aftermarket glass, installed it in a day, and calibrated the sensor. The price is 58 000. Everything is clear, no pushing of extra services. Thanks, I'll come back!
Aidar
Sonata
Auto glass selection for a Hyundai Sonata, the windshield was cracked. Here they replaced it with an acoustic glass, and it became quieter. The price is 62 000, the work was done in 1 day. I'm pleasantly surprised by the service and attitude.
Zhanna
Glass replacement on a Skoda Octavia, there was a chip right in front of my eyes. They selected an original, but at an aftermarket price — 58 000. Installed quickly and with quality. I've been driving for a month, even forgot it happened. Thanks for the professionalism!