We will restore body geometry, remove dents, punctures and corrosion. Panel beating, welding, painting in the factory color — for Gazelle, UAZ Patriot, Hunter, Bukhanka and other models. We work with a warranty of 24 months, and we have a paint booth on site. Book a free diagnostics — we will assess the damage and agree on an estimate accurate to the tenge.
Prices are for typical works. Exact cost after diagnostics.
Service
Duration
Warranty
Price
Dent straightening (per dm²)
1–2 hours
24 mo
from 3 000 ₸
Local painting (without preparation)
1–2 hours
24 mo
from 10 000 ₸
Bumper painting
from 1 day
24 mo
from 15 000 ₸
Fender painting
from 1 day
24 mo
from 18 000 ₸
Door painting
from 1 day
24 mo
from 20 000 ₸
Hood painting
from 1 day
24 mo
from 22 000 ₸
Fender straightening and painting
from 1 day
24 mo
from 25 000 ₸
Door straightening and painting
from 1 day
24 mo
from 28 000 ₸
Sill replacement (with welding)
from 2 days
24 mo
from 30 000 ₸
Anti-corrosion treatment (underbody)
from 1 day
24 mo
from 30 000 ₸
Roof painting
from 2 days
24 mo
from 35 000 ₸
Full body painting (Gazelle)
from 5 days
24 mo
from 150 000 ₸
Full body painting (UAZ Patriot)
from 5 days
24 mo
from 180 000 ₸
Geometry restoration (frame machine)
from 2 days
24 mo
from 50 000 ₸
Raptor coating (body)
from 3 days
24 mo
from 200 000 ₸
The exact cost depends on the condition of the body and the selected materials. Warranty on works of 24 months. Warranty periods — see the page «Warranty»
06
Advantages of body repair for Gazelle and UAZ at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
24MO
warranty on labor — the term is stated in the work order.
Acid primer under the base coat
Rocker panel welded in spot by spot
Rustproofing in 2 coats
01
We paint in 2 layers with primer
First acid primer, then base and clear coat. Base without primer causes orange peel and peeling after a year, so we do two layers.
02
We weld the rocker panel with spot welds every 2 cm
A continuous seam warps the metal, so we weld with a semi-automatic welder in spots with breaks. The seam does not tear the factory primer, and the rocker panel does not rust.
03
Anti-corrosion in 2 layers with drying
We apply mastic and on top aerosol wax into hidden cavities. Two layers provide protection against road chemicals and do not wash off during winter.
04
24-month warranty on painting
We cover blistering and peeling of clear coat on the repaired part. If it appears, we will repaint at our own expense within the same period.
07
How body repair of Gazelle and UAZ is performed
Steps.
From inspection to delivery — 6 clear steps so you know what is happening with your car.
01
Inspection and Assessment
You leave a request on the website or call — we agree on a convenient time for inspection. You bring the car, the master inspects the damage and preliminarily estimates the scope of work and cost.
inspection and assessment
02
Ordering Parts
We prepare an estimate with an exact list of works, materials, and timeline, and fix the price. If necessary, we order original or aftermarket body parts for your model.
estimate and parts
03
Disassembly and Fault Detection
We remove damaged elements, identify hidden defects, and adjust the work plan.
hidden defects
04
Body Work
We pull, straighten, weld — we restore the body geometry, eliminate dents and corrosion.
pulling, straightening, welding
05
Painting and Drying
We prime, paint in several layers, dry in a chamber, matching the color to the body tone.
primer, paint, booth
06
Assembly and Delivery
We assemble the car, perform quality control, and hand it over to you with a warranty on the work.
We do body repair for Gazelle and UAZ in Almaty for the Gazelle, Sobol, GAZon Next, Patriot, Hunter and Bukhanka: we patch and replace cab elements, weld sills, straighten frame bodies on the bench, paint over acid primer and seal hidden cavities with anti-corrosion coating. We start work after a written estimate, with a 24-month warranty on the body and paint.
Weak Spots of GAZ and UAZ Cabs and Bodies
GAZ and UAZ frame vehicles rust and dent in their own places. Each model has its own set of trouble spots, and an experienced inspection follows this map, not just the dent the car was brought in for.
Where We Look for Corrosion on Different Models
Inspection map for each model
Model
Where we look for corrosion
What else we check
Classic Gazelle
Windshield frame, sills and cab steps, bottom of doors
Cab mounts, front fender attachments
Gazelle Next and GAZon Next
Steps, lower door edges, cab arches
Gravel chips on the front of the cab
Sobol and all-metal vans
Lower side panels, sliding door opening, cabin floor
Sliding door tracks and rollers
UAZ Patriot
Rear arches, sills, bottom of doors
Rear door hinges with the spare wheel
UAZ Hunter
Sills, bottom of doors, body floor
Panel seams and the rear door
UAZ Bukhanka
Lower front panel, sills, floor, gutters
Door openings, body-to-frame mounts
Inspection from Below and in Hidden Cavities
For body repair of a Gazelle or UAZ in Almaty, we first lift the vehicle: the shop has six lifts, so the frame, cab floor, and sills are fully visible. A rust spot on the outside of a sill usually means the metal inside is already thinner than it looks, so we tap suspicious areas and carefully open them up before writing the estimate. We also check the cab mounts and body bushings separately: if the rubber has sagged, the cab sits unevenly and the door gaps drift without any impact. On a frame vehicle, it's important to separate what's damaged on the cab, what's on the body, and what's on the frame itself—the whole scope of work depends on that. We also note traces of previous repairs, thick body filler, and someone else's welds in advance so they don't become a surprise mid-job. Based on the inspection, we issue a written estimate, start work only with the owner's approval, and the service advisor manages the work order until handover.
Cab, platform, and van of the Gazelle
A Gazelle works as a tool, and its body tasks fall into three parts: the driver's cab, the cargo platform with sides, and the all-metal van.
Inserts or a new cab
Repairing a Gazelle cab almost always starts with the question: patch it or replace it entirely. If the sills, steps, lower doors, and corners of the windshield frame have rusted through but the structure is solid, we cut out the rust and weld in repair inserts—these parts are widely available for the Gazelle. When corrosion has reached the floor, rear pillars, and frame mounting points, inserts turn into endless patching, and it's wiser to install another cab. We make the decision based on the estimate together with the owner, and they choose the body parts themselves: OEM, aftermarket, or their own part. Keep in mind that the Gazelle Next cab is designed differently, and parts from the classic model don't fit it. At CARGID, we return the removed inserts and old parts to the owner, and at key stages we provide a photo report so you can see how much metal was actually replaced. We fit the new cab or inserts to the door and hood openings, and replace the cab mounts if the rubber has sagged.
Platform, sides, and van
Sides: loading damages the edges and hinges, and the latches loosen over time, so the side starts rattling and opening while driving.
Platform floor: the deck rots at the edges and where it's attached to the crossmembers, and the crossmembers themselves rust underneath—you only see them from below.
Sobol and Gazelle van: large flat side panels show any wave, and the sliding door opening deforms from impacts and frequent use.
Cargo compartment floor: unsecured cargo leaves dents, and corrosion starts through chips in the compartment that the driver doesn't notice behind the trim.
GAZon Next: its cab is shared with the Gazelle Next, so the repair approach is the same, but the platform is larger and under more load.
Frame, mounts, and geometry of a frame vehicle
On a frame vehicle, the cab and body sit on the frame. An impact, sliding into a ditch, or constant overloading can damage it, and from the outside it's far from immediately noticeable.
When the frame needs straightening
We always check the frame when the impact was to the front, a corner of the platform, or the rear bumper, even if the cab looks almost intact. Signs that the frame itself has bent: cab-to-platform gaps differ left and right, wheels sit asymmetrically, the vehicle pulls to one side with a healthy suspension. We straighten frame bodies on a bench: the frame is secured and pulled to control points, not by eye. We gouge out and weld cracks at the brackets, replace rotten sections of the side members, and then cover the welds with protection. The wheels are attached through the axles and suspension to the frame, so after straightening we check alignment on a 3D stand; otherwise the tires will wear unevenly. If it's a work vehicle, we tell you about any cracks found before repair: a frame with cracks is dangerous under load. We replace bushings and mounts that sagged from the distortion along with the straightening; otherwise the cab will sit unevenly again.
What we check around the frame
Spring brackets: cracks from overloading most often appear around them, and rust under the bracket goes unnoticed until the metal cracks.
Crossmembers: a crossmember bent by an impact from below changes the distance between the side members, and the platform distorts as a result.
Cab mounts and body bushings: sagged and cracked rubber causes knocking, vibration, and door misalignment even though the body itself is intact.
Inner cavity of the side member: dirt and water accumulate inside, and the metal rusts from the inside out, so the cavity should be washed and coated with wax.
Tow hitch and bumper brackets: an impact to the tow hitch is transmitted directly to the rear ends of the frame, so they're checked even if the bumper is intact.
Patriot, Hunter, and Bukhanka in the body shop
The three most common UAZ models are built differently: a modern SUV, a descendant of the classic army body, and a wagon layout. That's why their usual body tasks differ too.
Patriot and its rear end
At our shop, UAZ Patriot body repair most often involves the rear of the vehicle. The rear arches collect dirt and road chemicals from under the wheels, and corrosion spreads from the edge inward. On many vehicles, the spare tire hangs on the rear door, which puts constant load on the hinges: over time the door sags, stops closing properly, and cracks appear in the paint around the hinges, then in the metal. We restore the hinge mounts, align the door to the opening, and only then paint; otherwise the fresh paint will crack in the same spot. The sills and lower doors of the Patriot rust similarly to other frame vehicles, and we repair them with inserts. Off-road driving adds dents to the sills and rear fenders from stones and ruts, and the rear bumper and its brackets suffer on descents. After repair, we coat the arches with underbody sealant and the sill cavities with wax so rust doesn't return after a couple of winters.
Hunter and Bukhanka
Hunter: the body is made of flat panels and simple bends, so dents straighten well, and rust most often sits in the sills, floor, and lower doors.
Hunter rear door: the spare tire also loads the hinges, and the opening loosens over time like on the Patriot, so it's checked at every inspection.
Bukhanka: long flat sides and many welded seams along which corrosion spreads under the paint farther than visible from the outside.
Bukhanka front end: the lower part of the front panel is the first to catch stones and chemicals, and behind it the headlight recesses and lower cab rust.
Bukhanka floor and gutters: water stagnates in the cabin floor and roof gutters, so they're opened up during inspection rather than left for later.
Welding, paint layers, and rustproofing
On a working frame vehicle, the coating lives in harsh conditions. Durability is decided not by the materials themselves but by the welding method and the order of layers applied to the metal.
Sills and inserts with spot welds
We weld sills and repair inserts with a semi-automatic in spot tacks about 2 cm apart, not with a continuous seam. A continuous seam heats thin body metal hard, the panel warps into waves, and then you have to level it with a thick layer of filler that cracks under vibration. Tacks put in less heat, the part stays straight, and the factory primer next to the seam burns off only in a narrow strip that's easier to protect. Before welding we fit the insert in place so the gap is even along the whole length, otherwise the seam comes out porous. After welding, the sill is always sealed with protection from the inside: you can't see the seam from the cavity side, but that's exactly where rust starts. Our own paint booth and bays let us run the whole process in-house, without sending the car elsewhere, and the same technicians who welded the metal are responsible for every layer.
What the protection consists of
Layer order on repaired metal
Layer
What we apply
Why
Primer
Acid primer on bare metal
Paint adhesion to metal and corrosion protection
Filler
Thin layer on straight metal
Leveling minor imperfections after straightening
Color
Base enamel
Shade matched to the body; without primer the base goes on with orange peel
Clear coat
Clear coat over the base
Gloss and resistance to chemicals
Undercoating
Anti-corrosion on the underbody and arches
Protection from gravel and moisture
Wax
Aerosol wax in hidden cavities
Protection of sills and frame rails from the inside
Warranty and paperwork
Term: CARGID gives a 24-month warranty on body repair and painting; the term and conditions are written into the work order and the completion certificate.
Bubbling and peeling: if the clear coat on a repaired part bubbles or peels, we repaint it at our own expense under the warranty.
Warranty check: diagnostics for a warranty case are free; just bring the car and the repair paperwork.
Exceptions: the warranty does not apply after a new accident, third-party interference, or to a part the owner supplied himself.
Transparency: we take photo reports at key stages, return the old parts, and do a test drive before handover.
Cab, frame and protection for Gazelle and UAZ
The body of a body-on-frame commercial vehicle wears out faster than a passenger car's, but predictably. A few simple rules help you catch a problem in time and keep minor rust from turning into a cab replacement or frame straightening.
Inspection from below: the frame, cab mounts, sills and floor are checked on a lift, and suspicious spots are opened up before the estimate is drawn.
Cab: while the structure is solid, rot is closed up with repair inserts, and once corrosion has reached the floor and pillars, replacing the cab is the better deal.
Frame: uneven gaps, wheels that don't line up and pulling with a healthy suspension point to frame damage, and after straightening it you need a wheel alignment.
UAZ models: on the Patriot and Hunter watch the rear door hinges with the spare tire; on the Bukhanka watch the front panel, floor and rain gutters.
Protection: sills are welded with tacks, painted over acid primer, and hidden cavities and frame rails are sealed with wax.
10
Frequently asked questions about body repair of Gazelle and UAZ in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The price depends on the extent of damage, the model and the condition of the vehicle. For example, straightening and painting a fender — from 25,000 ₸, straightening and painting a door — from 28,000 ₸, rocker panel replacement with welding — from 30,000 ₸, full body painting of a Gazelle — from 150,000 ₸. A service advisor will calculate an exact estimate free of charge after inspection; parts, if needed, are paid separately.
On average, minor repair (local dent removal and painting) takes 1-2 days. If a fender or rocker panel needs to be replaced, 4–5 days will be added due to welding, filling, painting and drying. Full painting with removal of bolt-on parts and preparation — from 7 days. We give exact timelines after defect detection and fix them in the work order before starting. We don't put the car on the back burner: we have our own paint booth and stations, so we control the entire process.
Yes, we provide a 24-month warranty on all types of body repair. It covers the quality of work, welded seams, and also peeling of the paint coating or corrosion at the repair site. If a defect caused by us appears during the warranty period, we will redo it free of charge. We take before/after photos and issue a certificate listing the work. The warranty does not apply to mechanical damage after our work, chemical exposure to aggressive reagents, or failure to follow care recommendations.
Yes, booking is mandatory, especially from spring to autumn when the workload is at its peak. For an accurate time estimate, send photos of the damage via WhatsApp, we'll assess it preliminarily. Then you choose a convenient time, come in, the master inspects, we agree on the scope, cost and timelines. On the booking day we start work immediately, without waiting. If you booked but can't make it — notify us at least a day in advance, we'll reschedule to a convenient time without penalties.
Yes, you can bring your own parts, paint materials or consumables. But keep in mind: if the part is used or non-original, we can guarantee the quality of work, but not the lifespan of the part itself. Before installation, the master will check its condition and warn you if hidden damage is found. If you use your own materials, let us know in advance so we can select the right technology for your paint coating. If you don't have such materials, we'll offer ours — usually it's cheaper than searching, and we are responsible for following the technology.
Yes, we fix the consequences of poor work. Bring the car in for inspection — within 30–60 minutes we'll identify the problem: poor preparation, thick filler, wrong color matching, violation of welding technology. Fixing costs like a full repair of the part: for example, straightening and painting a door — from 28,000 ₸. We'll make an exact estimate after inspection. We strip the coating down to metal, remove corrosion, pull the geometry and paint according to technology.
Local repair is fixing a single damage without repainting the entire part: a small dent, scratch, rust. It takes less time and money — from 10,000 ₸ per area up to 30 cm. Full repair of a part — straightening, welding, filling and painting the entire element. It's more expensive but guarantees perfect geometry and color. There's also 'geometry repair' — when the car is after an accident, we check the subframe dimensions and restore them. The choice depends on the condition of the body.
For the first 30 days after painting, do not wash the car in automatic brush washes, do not polish or apply wax — fresh lacquer must fully dry and harden. Use hand washing with a soft sponge and non-aggressive shampoo. Avoid stone chips and scratches, try to park carefully. In winter in Almaty with reagents, be sure to wash the car at least once every 2 weeks. If you notice chips down to metal — come to us immediately for touch-up, this will prevent corrosion.
We accept cash (tenge), transfer to a Kaspi or Halyk card, as well as QR payment via Kaspi Gold. For legal entities, payment by bank transfer with an invoice and contract is possible. There are installments up to 6 months from partner banks (for example, for amounts from 150 000 tenge via Kaspi Red or Halyk Card). Prepayment is not required — you pay after you accept the work and sign the certificate. The warranty is valid from the moment of signing, and if desired, we can close the full amount immediately.
No, we repair the bodies of both passenger cars and commercial vehicles. For Gazelle, UAZ, Sobol and GAZon Next we have experience with thick metal, frame welding and body-on-frame vehicles on the straightening bench. Body repair for passenger cars of other makes — see the Body Repair section.
11
What clients say about our Gazelle and UAZ body repair
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Azamat
Gazelle 3302 after an accident — they straightened the side member. Done in 3 days, price unchanged, everything was clear. After repair the car drives smoothly, geometry restored. Thank you, now only to you.
Dmitry
UAZ Hunter, replaced the front fender and painted. Color matched perfectly, not even noticeable. Work took 2 days, 55 thousand tenge, acceptable. I recommend.
Elena
Gazelle Next, rear fender after a collision. Done quickly, neatly, just like new. Price 47 thousand, met the deadline. Thanks to the masters!
Marat
UAZ 452, rocker panels burned through. Cut out, welded new ones, painted. All clear, in 2 days. 40,000 tenge. Very satisfied.
Serik
Gazelle body after a rollover? No, just a big dent. Pulled out, painted, now indistinguishable from new. Cheap and cheerful, I recommend.
Aigerim
UAZ Patriot, hood damaged by hail. Dents pulled out, painted. Time 1 day, 38 000 tg. Thank you, excellent.
Vladimir
Gazelle Farmer, replaced rocker panels and partially the underbody. Worked 4 days, quality top-notch. Price 95 thousand, but for such work it's worth it.
Zhanna
UAZ Profi, rear side bent. Straightened, painted. Quickly, in 1 day, and 20 thousand. Excellent service, polite masters.
Nurlan
Gazelle 3302, hood scratched. Painted in half a day, color matched. Price 15 thousand, no cheating. Thank you, I'll come again.