The hood is the most visible part of a car, and it is the one that most often suffers from chips, scratches, and corrosion. At our auto service CARGID, we perform hood painting with a 24-month warranty. Careful preparation, precise color matching and professional painting in a booth — everything for a perfect result.
Current prices for all types of hood painting services at the CARGID auto service center.
Service
Duration
Warranty
Price
Inspection and diagnostics of hood paintwork
30 minutes
24 mo
from 2 000 ₸
Local painting of chips and scratches (up to 3 cm)
from 2 hours
24 mo
from 8 000 ₸
Hood polishing after local painting
1 hour
24 mo
from 5 000 ₸
Hood painting without removal (preparation 1 hour)
from 4 hours
24 mo
from 25 000 ₸
Hood removal and installation
2 hours
24 mo
from 7 000 ₸
Hood preparation for painting (sanding, puttying)
from 3 hours
24 mo
from 15 000 ₸
Hood painting with preparation (hood removed)
from 1 day
24 mo
from 40 000 ₸
Hood painting with blending to fenders
from 1 day
24 mo
from 60 000 ₸
Full hood painting with old paint removal
from 2 days
24 mo
from 80 000 ₸
Hood painting (SUV/large-size)
from 2 days
24 mo
from 70 000 ₸
Hood painting (compact class/sedan)
from 1 day
24 mo
from 35 000 ₸
Urgent hood painting (within 24 hours)
urgent
24 mo
from 65 000 ₸
Mobile hood painting (on-site)
from 1 day
24 mo
from 90 000 ₸
Rust removal and anti-corrosion treatment
from 2 hours
24 mo
from 10 000 ₸
Hood polishing to prepare for painting
1 hour
24 mo
from 4 000 ₸
Primer application and surface leveling
from 2 hours
24 mo
from 12 000 ₸
Hood painting in color with shade matching (computerized matching)
from 1 day
24 mo
from 50 000 ₸
Hood painting with tuning elements (two-tone)
from 2 days
24 mo
from 85 000 ₸
The exact cost depends on the condition of the hood, presence of corrosion, and color complexity. Minimum prices are indicated; the final amount is determined after inspection. Warranty periods — see the page «Warranty»
06
Why people choose hood painting at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
24MO
warranty on labor — the term is stated in the work order.
24-month warranty
No runs
Anti-corrosion
01
We paint in a booth at 60°
We dry each layer at 60°C, not in the air in a bay. The paint fully polymerizes, so the hood does not become dull or chip after six months.
02
We remove rust down to bare metal
We clean the affected area, treat it with a converter, and prime with epoxy. Without this, the paint lasts a couple of months and peels off together with the corrosion.
03
We paint in 3 days, not a week
One day for disassembly and preparation, one day for painting, one day for drying and reassembly. It cannot be removed earlier — the clear coat won't gain hardness and will be rubbed off during polishing.
04
24-month warranty on the coating
We are responsible for the clear coat and pigment: if matte spots or blistering appear, we will repaint the area for free. Stone chips are not covered by the warranty.
07
Hood painting in Almaty: 6 steps to a perfect gloss
Steps.
We explain how the work on your hood goes — from request to handing over the keys.
01
Inspection and estimate
You leave a request on the website or by phone, we clarify the details and book you for a convenient time. The technician inspects the hood, determines the condition of the paint and metal, and gives the exact cost of the work.
request on WhatsApp
02
Washing and preparation
The hood is thoroughly washed and degreased to remove dirt and ensure adhesion of materials.
inspection and diagnostics
03
Disassembly and masking
We remove moldings and headlights and mask adjacent parts so they are not damaged during painting.
estimate before work starts
04
Body filler and primer
We level the surface with body filler, apply primer, and let it dry for a perfect base.
work to factory procedure
05
Painting and clear coat
We apply several coats of paint in your car's color, then cover with clear coat for protection and gloss.
result check
06
Polishing and reassembly
After drying, we polish the surface to a mirror finish and put all removed parts back in place. You accept the work, inspect the hood under light, and take the car with a warranty of 24 months.
CARGID paints hoods in Almaty in a spray booth with each layer dried at 60 °C — from local chip repair to a full repaint with old paint removal. Turnaround is 3 days, we match the shade by computer, and if there's a risk of color mismatch we blend into the fenders. 24-month warranty, recorded in the work order.
What Hood Damage We See
The hood takes the first hit from stones, road chemicals, and sun. Here are the typical damages and why we decide on the repair method based on an in-person paint inspection, not a photo in a messenger.
Chips, Scratches, and Stone Scuffs
We start with an inspection and diagnostics of the hood's paint and determine whether local painting of chips and scratches up to 3 cm is enough or the whole panel needs painting. The service advisor inspects the surface with a lamp, notes the depth of each damage and the boundary where the clear coat is still intact. Then comes a written estimate: it lists preparation, primer application and surface leveling, and hood polishing after local painting as separate line items. Repair starts only after you approve this estimate. We take photos at key stages so you can see exactly what was sanded and what primer was used. In our experience, hoods more often come in with a scattering of small dots along the edge than with one large dent. It's cheaper to fix a small chip right away — metal corrodes through it, and within a season a local job turns into a full repaint with sanding down to bare metal.
Rust, Bubbling, and Dents
We sand rust spots down to bare metal, treat them with a converter, and prime with epoxy; dents are leveled with body filler before painting. The corrosion boundary isn't visible right away: under seemingly intact clear coat the metal is already porous, so we sand with a 1–2 cm margin from the visible spot. The converter dries, then epoxy primer goes on — it holds moisture and keeps the spot from coming back through the paint. Filler goes on in thin layers, each sanded, otherwise a wave shows up in the finish. Dents on the hood often coincide with rust spots — then it's metal first, leveling second. Painting over corrosion is pointless — the paint peels off with it within a couple of months, so preparation takes longer than the paint job itself.
Which Painting Method Suits Your Hood
We choose the method based on the depth of damage and the condition of the hood's edge — this affects both the scope of work and the final result. Below are the options we offer and when each is appropriate.
When to Remove the Hood and When On-Site Painting Works
We remove the hood when edges and ends need treatment or the entire surface needs leveling; for local damage we work without removal. Repair on a flat panel with area defects doesn't require disassembly: we mask adjacent panels and apply the coating on site. Removing and installing the hood adds operations but gives access to the ends, where corrosion most often starts, and lets us sand the metal along the entire edge. On panels older than eight to ten years, rust spots hide exactly in the ends, so we decide after inspection, not from a photo. A removed hood is easier to prepare for coating on all surfaces, but the extra removal and installation operations add time — we include them as separate line items in the estimate.
Where to Start with Mixed Damage
When chips, scuffs, and incipient corrosion combine, we start with an inspection and paint diagnostics, not with painting. Hood painting in Almaty is most often needed in exactly this mixed situation: some defects are fixed locally, while areas near the edge require sanding to bare metal. If rust spots have already bubbled the coating, local repair won't work — the paint peels off with the corrosion, so we treat such areas with a converter and epoxy primer. The service advisor records each defect in the work order and shows the client which areas will get spot repair and which need the full cycle. This approach saves budget: you don't have to repaint the whole panel because of a couple of chips.
How We Achieve an Even Color Without Mismatch
Color mismatch is the main fear with hood painting: the panel is fresh but reads as a patch in the sun. Here's where the color boundary comes from and how we eliminate it during color matching and application.
Why the Hood May Differ in Color from the Fenders
Color mismatch comes from faded factory paint, different paint batches, and application angle — a new layer on the hood may look different from adjacent panels. Over several years, sun and chemicals change the pigment: the factory color shifts, while fresh paint from the can stays original. The panel's tilt also matters — the hood sits almost horizontal and catches more light than a vertical fender. The clear coat plays a role too: the factory layer clouds and yellows over the years, while new clear coat is transparent and reflects light differently. Even precisely matched paint on a faded body shows a visible boundary, so color is evaluated on the panel, not by catalog. Our service advisor compares spray-outs right on the body in daylight — so the seam is visible before work starts, not after assembly.
Computerized Shade Matching and Blending into the Fenders
We match the color by computer, and when there's a risk of a visible edge, we blend onto the fenders so the seam doesn't show. A spectrophotometer reads the pigment from the adjacent panel and gives a recipe accurate to the gram — that's more precise than matching against a fan of samples. Then we prepare several spray-out cards and apply them to the body next to the blend area. Blending isn't always needed — on dark and fresh finishes an exact match is often enough, so we decide based on comparing the spray-outs. If the edge still shows, we feather the paint onto the fenders and clear-coat the whole area — the blend fades into an invisible band. The body technician manages the work order from color matching through handover, so the approved tone isn't changed mid-job.
Why the finish doesn't chip after six months
Durability doesn't come from the paint itself but from surface prep and the drying schedule. Here are the two factors that determine how long the panel lasts without chips or cloudy clear coat.
Stripping to bare metal and epoxy primer
We strip the rust spot down to bare metal, treat it with a rust converter and prime with epoxy, then apply primer and level the surface. We strip 2–3 centimeters beyond the visible spot: corrosion spreads under the paint farther than the eye can see. The converter turns oxides into a stable compound, the epoxy primer creates a moisture-proof barrier, and the leveling layer removes micro-relief before the finish goes on the hood. On a removed panel, prep takes about an hour, but it's exactly what decides how the finish behaves later. The paint goes onto a smooth, degreased base and bonds across the whole area, not just around the outline of the spot. The quality of this stage is what determines whether the hood painting holds up long-term. Skimping on prep is the most expensive saving: without it, the finish lasts a couple of months and peels off along with the corrosion.
Paint booth and drying at 60 °C
We paint in the booth and dry each layer at 60 °C, so the finish fully polymerizes and doesn't cloud or chip after six months. The panel goes through 2–3 coats: base, then protective clear coat. We hold a pause between coats so the solvent escapes, otherwise it stays under the clear and causes bubbles. The booth temperature stays stable — the clear coat hardens evenly across the whole area, including ribs and edges. In an ordinary bay without a booth, the clear dries in the air and doesn't harden — that kind of finish gets rubbed through during the first polish. In our practice, a panel isn't released before the third day: early reassembly undoes the whole drying schedule.
Timeline, warranty and care after painting
Here's what the three days of work consist of, exactly what the warranty covers, and how to treat the new finish in the first weeks so the hood stays even in color and doesn't chip.
Three days of work, stage by stage
We paint a hood in three days: one day for disassembly and prep, one day for painting, one day for drying and reassembly. First, the service advisor removes the panel, strips the surface, fills the uneven spots and applies epoxy primer, after which the hood goes into the paint booth, where each layer dries at 60 °C. Then we match the shade and paint, and at the finish — drying, reassembly and a test drive before handover. The car can't be released earlier: the clear coat won't harden and will get rubbed through during polishing, so we don't promise "in a day," although the price list does include express painting in 24 hours for certain cases. We keep this schedule on all body repair, including hood work with blending onto the fenders.
What the 24-month warranty covers
We give a 24-month warranty on painting and record the term and conditions in the work order and the completion certificate at handover. The warranty covers the work performed and the parts installed, and diagnostics for a warranty case are free with us. It doesn't cover accidents after the repair, third-party interference, normal wear of consumables, or a part brought in by the customer. That's an honest line: if the hood got scratched in a parking lot or the surface was damaged during a self-service wash, it's not a warranty case, but we'll still inspect the panel and tell you what can be done. We put the term and conditions in writing so that a year later there are no disputes about what exactly was included in the job.
Hood care in the first weeks
Washing: gentle, no stiff brushes or abrasive sponges in the first weeks after painting.
Pressure: don't aim the jet right at the hood edge, keep the nozzle at a distance.
Polishing: hold off until the clear coat fully hardens, otherwise you can rub through the fresh layer.
Chemicals: avoid aggressive compounds and solvents, they strip the top protective layer.
Inspection: if you have any doubts, come in for a free diagnostic, we'll take a look at the finish.
What to Know Before Hood Painting
Five points to keep in mind before handing over your hood for work — from choosing the method to the paperwork at handover.
The method follows the damage: local chip painting, without removal, with removal, or a full repaint with stripping the old paint.
Color mismatch is prevented by matching: computer color matching and blending onto the fenders when there's a risk of a visible edge.
Durability comes from prep: stripping to bare metal, epoxy primer and drying each layer at 60 °C.
The timeline is realistic: 3 days for prep, painting and drying with reassembly.
The warranty is specific: 24 months on painting, with conditions recorded in the work order and certificate.
10
Frequent questions about hood painting in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The price of hood painting at our service depends on the condition of the surface, the type of paint, and the need for additional work. The basic option — preparation, primer, painting, and lacquer — costs on average from 40,000 tenge. We quote the exact price after inspection, which is free. Exact prices are in the price list on this page.
Standard timeframes are from 1 to 2 business days. If only local polishing and painting without serious preparation are required, we can finish in 1 day. When the hood has metal damage or requires removal for better access, the work may take up to 2.5 days. We fix the exact timeframe when booking so you can plan your time. Accelerated painting (in 6-8 hours) is possible, but not recommended due to disruption of the drying technology.
Yes, we provide a warranty on all types of body repair and painting — 24 months on the paint coating and 24 months on anti-corrosion treatment. The warranty covers peeling, cracks, bubbles, and enamel shrinkage if they did not occur due to the client's fault. If you follow the care recommendations, you are protected from defects. During the warranty period, we fix any defects related to our work free of charge.
Yes, an appointment is required, as painting requires preparation and time coordination. You can book by phone, via WhatsApp, or on the website. We are usually booked 2-3 days in advance, and during the season (spring-summer) — up to a week. At the time of booking, we reserve a time for you and are already waiting. If you come without an appointment, you may have to wait, but it is unlikely anyone will be able to start work immediately — an inspection and estimate are needed.
Technically yes, but we do not recommend it. We use proven materials (paint, primer, lacquer) from well-known brands that we purchase directly. If you have your own paint, you can bring it, but responsibility for quality and compatibility lies with you. Also, the cost of work will not decrease — we do not give a discount for our own materials. In case of problems with your paint, the warranty does not apply.
If the quality is not satisfactory, tell us immediately — we will solve the problem. Within 3 days after the work is completed, you can return, and we will fix the defects free of charge (for example, runs, orange peel, uneven tone). At a later date, the warranty applies: if the defect is not due to external influences, we repaint free of charge. After handing over the work, we provide a receipt and a detailed inventory so you can refer to it in case of a dispute.
There are three main options: 1) local painting — when only the damaged area (chip, scratch) up to 30 cm is painted, with a lacquer blend, price from 8,000 tenge; 2) full hood painting — complete coverage of the part, suitable for multiple damages or a desire to refresh the color, from 40,000 tenge; 3) painting with complete removal of the old coating and preparation for complex colors (metallic, pearl) — from 70,000 tenge. The difference is in duration, price, and final quality.
For the first 2-3 weeks, avoid aggressive high-pressure washing and chemicals — the paint needs time to fully dry. Hand washing with a soft sponge and shampoo is allowed. Do not place hot objects on the hood, do not touch it with abrasive wipes. After a month, you can apply polish or wax for protection. If the hood was washed at a car wash after painting — check whether they use hot wax, as this can affect the color.
You can pay in any convenient way: cash, card (Visa/Mastercard), or bank transfer. For legal entities, cashless payment is possible with closing documents provided. No prepayment is required — you pay for the result after inspection and your approval. If the amount is more than 150,000 tenge, payment in two stages is possible: an advance for materials and the balance after completion. We record all payments in the work order.
The service includes: washing the hood, degreasing, masking adjacent parts, sanding damaged areas, body filler (if needed), primer, applying paint (in 2-3 coats) and lacquer, polishing for gloss. You do not need to come to prepare the car — we will do everything ourselves. But it is important that the hood is not freshly painted or covered with wax. If there is bitumen or scale on the hood, tell us, we will treat it with a special product — this will not affect the cost.
11
Reviews of our hood painting work
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Dmitry
Toyota Camry
Had the hood painted on a 2021 Toyota Camry. There were a lot of chips after highway driving, I thought it would need a full repaint. The technician suggested local painting with a blend, it came out to 65,000 tenge and 2 days. They gave the car back like new, the color is indistinguishable. Thanks for the work!
Aigerim
I brought the hood in for painting, there were many years-old scratches and rust spots. The work took 3 days, the price was 55,000 tenge. The result was very good! The surface is smooth, shiny, now the car looks like new. Thanks to the craftsmen!
Rustam
Sportage
Had the hood painted on a Kia Sportage. There were many scratches, I wanted to freshen it up. They did polishing and painting in 1 day, price 45,000 tenge. The result is super, the hood is like a mirror! I recommend this service.
Svetlana
I went to CARGID to have the hood painted on a Nissan Juke. It had faded in the sun, the color became dull. The craftsmen matched the paint, repainted it for 70,000 tenge, 3 days. Now the color is rich, like at the dealership. Thanks for the professionalism!
Andrey
I brought in a Lexus RX300 after an unsuccessful film wrap. Underneath there were chips. They removed the film and painted the hood for 58,000 tenge. Fast and high-quality, the color match was perfect. I recommend!
Natalya
Had the hood painted on a Hyundai Accent after an accident. There was a crack, peeling paint. Everything was done in 4 days, it came to 85,000 tenge. The repair was completed on time, the hood looks wonderful, I will come back again.
Yerzhan
I needed to remove scratches from branches on the hood of a Mazda 3. Polishing took care of the small ones, and the deep ones were sanded down and repainted in 1 day for 45,000 tenge. Very satisfied, thanks for the speed and quality.
Marina
They painted the hood on a Volkswagen Tiguan. Initially there were chips and rust. The technician cleaned everything, treated it, painted it in 3 days. I paid 55,000 tenge. The result is excellent, they even gave a warranty. Happy as an elephant!
Ilya
Ordered hood painting on a Mitsubishi Lancer. There were chips and dulled lacquer. They did everything in two days, it cost 65,000 tenge. The paint went on perfectly, the blend is unnoticeable. Everything is precise and on schedule. Thanks!