

Forged wheels R18 crack
- Cause
- The client hit a curb at high speed, a crack appeared on the inner side of the wheel.
- Found
- Crack 5 cm long, risk of further destruction.
- Done
- Argon welding, grinding, painting in silver metallic.

We'll restore your wheels to their factory look and geometry. We fix dents, cracks, and chips, paint in any color, and polish to a mirror shine. We work with alloy and steel wheels and provide a warranty on all types of work.
What wheel restoration includes: from straightening and welding to painting and polishing.

We remove the old wheels and install new or other ones from stock. We check the fit on the hub and the tightening.

We weld cracks and burn-throughs in the rim body with argon. After welding, we clean the seam and check the geometry.

We clean the rim with abrasive down to bare metal. We remove rust, old paint and dirt before painting.

We remove the rim and caliper, rebuild the caliper, replace consumables, put everything back and bleed the brakes.

We remove the old paintwork with chemicals or sandblasting. The surface becomes clean and ready for primer and paint.

We sand and touch up individual scratches and chips. We do not repaint the entire rim.

We polish the alloy rim with paste and a pad. We remove minor scratches and restore the shine of the surface.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
Examples of our technicians' work on restoring various types of wheels.
We will restore the geometry, remove scratches and chips, and bring the wheels back to their factory look.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Wheel inspection and diagnostics (removal/installation not included) | 30 minutes | 6 mo | from 2 000 ₸ |
| Wheel washing and degreasing before restoration | 30 minutes | 6 mo | from 1 500 ₸ |
| Removal of old paint and coating from the wheel (chemical/sandblasting) | 1–2 hours | 6 mo | from 5 000 ₸ |
| Elimination of local scratches and chips without painting the entire wheel | 1–2 hours | 6 mo | from 4 000 ₸ |
| Polishing of an alloy wheel (removal of minor scratches) | 1–2 hours | 6 mo | from 6 000 ₸ |
| Straightening of minor deformations (runout) on a stand | 2–3 hours | 6 mo | from 8 000 ₸ |
| Restoration of wheel geometry (straightening, without heating) | from 4 hours | 6 mo | from 12 000 ₸ |
| Welding of cracks and chips (argon) with subsequent treatment | from 3 hours | 6 mo | from 15 000 ₸ |
| Full wheel painting (primer, base, clear coat) — 1 wheel | from 1 day | 6 mo | from 10 000 ₸ |
| Polishing and application of a protective compound (when paint coating is not required) | 1–2 hours | 6 mo | from 5 000 ₸ |
| Wheel chrome plating (full coating) — 1 wheel | from 2 days | 6 mo | from 18 000 ₸ |
| Powder coating of the wheel (single-color) — 1 wheel | from 2 days | 6 mo | from 18 000 ₸ |
| Two-color wheel painting (combined) — 1 wheel | from 1 day | 6 mo | from 14 000 ₸ |
| Wheel restoration with caliper replacement (removal/installation, rebuild) | from 3 hours | 6 mo | from 5 000 ₸ |
| Tire re-fitting and balancing after restoration (1 wheel) | 1 hour | 6 mo | from 3 000 ₸ |
| Urgent wheel restoration (within 1 day) | from 1 day | 6 mo | from 12 000 ₸ |
| On-site restoration (inspection, minor repairs on site) | 1–2 hours | 6 mo | from 8 000 ₸ |
The exact cost depends on the condition of the wheel and the desired coating. Prices are per wheel, including the necessary materials. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We measure runout with a dial indicator on the machine and straighten to 0.3 mm. The wheel does not vibrate at speed, the steering wheel does not shake.
We weld cracks with argon and preheat the area, the seam is not porous. Oxy-fuel welding produces a brittle seam that bursts on a pothole.
We polish with a machine at 1500 rpm and paste in two passes. We remove scratches and dullness, but do not grind the metal down to a thin layer.
We give a year on the welded seam and straightening. If a crack appears or the geometry shifts, we redo it at our own expense.
We explain how wheel rim restoration goes from request to pickup.

You submit a request on the website or by phone, we pick a convenient time and book you in at the auto service. On the lift, we remove the wheels and assess the damage: chips, scratches, cracks, deformations.
request on WhatsApp
We quote the exact cost of work and timelines, you make the decision — we start the restoration.
inspection and diagnosticsWe clean the rim from dirt and old coating, remove corrosion and degrease the surface.
estimate before work starts
We correct deformations on a special stand and restore the perfect roundness of the rim.
work to factory procedureWe weld cracks with argon; after the seam, we check the rim for tightness and strength.
result check
We apply primer, paint and varnish, dry in a chamber — we get a durable factory-like coating. We balance the assembled wheel, install the rims on the car — you pick up the finished result.
warranty in the work orderWalk-ins welcome. By appointment — no queue.

Write to WhatsApp with the make, year and what's bothering you. We'll tell you the cause, a price estimate and pick a time for your visit.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

CARGID in Almaty restores wheel geometry and appearance: we correct runout on the stand to 0.3 mm, weld cracks with argon, paint and polish. First an inspection and written estimate, then the work. 6-month warranty on restoration; timeline and terms are fixed in the work order.
A wheel that vibrates or leaks isn't always a lost cause. We explain how we tell straightening from replacement and how we handle cast, forged, and stamped wheels.
We measure runout with a dial indicator on the stand: if the deviation exceeds tolerance, we straighten the rim, and scratches on the paint have nothing to do with geometry. A scratched but straight wheel holds pressure and doesn't vibrate—it needs cosmetics: stripping old paint, local chip repair, painting. A bent wheel behaves differently: the steering wheel shudders at 80–100 km/h, a hum appears, and the tire wears the tread on one side. On the straightening stand we check not only radial runout but also axial—the rim can "wander" in width, and balancing won't fix that. Vibration at the steering wheel at 80–100 km/h more often points to geometry than balancing, so it's better to start with a runout check, not with wheel weights. If you need wheel restoration in Almaty, the service advisor records the measurements in the work order so there's something to compare after straightening.
We weld a crack in a wheel with argon while heating the area and check the seam for leaks, but if the tear goes through a spoke or the bead seat, we honestly recommend replacement. Argon gives a tight joint without pores, and preheating relieves internal stress in the metal—without it, the joint becomes brittle and cracks on the first pothole. After welding, we check the rim for leaks and on the balancing machine, then balance it, and only then hand it back to the client. We also offer replacement with new wheels if repair isn't practical—we agree on the decision with you before work begins. Driving with a crack is dangerous not only because of pressure loss: on a pothole the seam opens up, and the tire can debead at speed. So if you suspect a crack, don't put off the inspection.
| Wheel type | What we do | Specifics |
|---|---|---|
| Cast | Straightening on the stand, argon welding, painting | Handle cold straightening well |
| Forged | Straightening without heating, local repair | Less ductile, overheating undesirable |
| Stamped | Panel beating, welding, painting | More often need geometry straightening |
We show the full route a wheel takes through the shop—from stripping old paint to balancing—and explain how polishing differs from painting and when the caliper needs attention.
We polish when the paint is intact and you need to remove scratches, paint when there are chips and a color change, and powder when maximum coating durability is needed. We start cast wheel repair by assessing the metal's condition: that determines whether polishing is enough or a full repaint is required. Polishing a cast wheel is done with a machine at 1500 rpm with paste in two passes: we remove dullness but don't grind the metal down to a thin layer. A full wheel repaint includes primer, base, and clear coat—it covers local scratches and restores color depth. Powder coating holds up to road chemicals and minor impacts better than liquid clear coat, but gives a solid matte or gloss finish. We apply a protective compound over the polish when the paint is still healthy: it repels dirt and road salts. Polishing won't save a wheel with peeling clear coat—the metal underneath is already oxidized, and the coating will quickly blister.
During restoration, we remove the caliper, rebuild it, and service it so that after assembly the wheel doesn't drag and the pads don't stick. Caliper rebuilding includes cleaning the guide pins, replacing grease, and checking piston movement—all done while the wheel is off the car and the assembly is accessible. Restoration with caliper service is convenient because you don't have to come back a second time: in one visit we take care of both the wheel and the brake assembly. A caliper that hasn't been removed for years often seizes on the guide pins, and after installing a new coating this shows up as uneven pad wear and overheating on one side. So at the first signs of sticking, ask to rebuild the assembly right away—removing the wheel again will cost more than one operation.
The result rests on three things—straightening tolerance, welding method, and surface prep for painting. We break down each with numbers and explain how the wheel will behave if a step is skipped.
We straighten runout to 0.3 mm and monitor it with a dial indicator on the stand because a larger residual causes vibration at speed even after balancing. The indicator shows deviation on the rim, the technician sees it in real time and stops when the needle reaches tolerance. Balancing alone doesn't fix geometry: weights compensate for weight but not for a wobbly rim. At 100–120 km/h, residual runout of 0.5 mm or more is felt in the steering wheel and floor, and the suspension takes impact on every bump. If the steering wheel still shakes, the cause is often not the wheel but worn hub or tire, so we check the wheel as a unit—that rules out false blame on the rim. Painting and rolling wheels go together: first geometry straightening on the stand, then prep and painting, otherwise the fresh coating will crack on a misaligned rim.
We weld cracks with argon and preheat the area: the seam comes out tight, with no porosity, and holds up under load on potholes. Before welding we warm the wheel so the metal doesn't crack next to the seam from a sudden temperature change, and once the part cools we check for leaks — the wheel shouldn't lose air along the weld. Oxy-fuel welding leaves a brittle seam with inclusions that splits on the first serious pothole, so cheaper doesn't mean more reliable. The argon bath shields the molten metal from oxygen, the seam comes out uniform along the whole length of the crack, and it can be finished so the repair spot doesn't stand out under paint. In my view, saving on the welding method is the most expensive kind of saving: a re-welded wheel comes back, but with a crack along the neighboring spoke.
Without sandblasting and primer, paint goes on top of old clear coat and oxidation and doesn't hold well, so we always strip the old finish and prime. Sandblasting wheels gives an even roughness across the whole surface, including the spokes and the inner barrel where a hand with sandpaper can't reach. Then comes a three-layer paint system — primer, base, clear — and drying in a paint booth at a stable temperature, with no dust and no drafts. Adhesion depends on the roughness of the metal: a smooth surface after chemicals without abrasive gives weak grip even with expensive paint. The first sign of a broken process is bubbles and chips along the rim edge after contact with road chemicals. It's worth checking adhesion on the hidden side of the wheel: if the clear coat comes off with a fingernail, the coating went on unprepared metal.
We break down how long each type of work takes, how to book and get checked in without waiting in line, and what can realistically be done on-site when a wheel needs a technician's attention.
| Work | Time |
|---|---|
| Polishing | same day |
| Painting | a few days |
| Complex restoration | depends on the scope after diagnostics |
| Rush restoration | within 1 day |
It's best to book ahead: the car is received by the service advisor, who opens the work order and manages it through to handover, and with a booking you skip the line. First we do diagnostics and a written estimate, and work starts only after you agree — so you see the scope before it begins. For the key restoration stages we prepare a photo report so you can see exactly what was straightened and painted. At check-in it's best to show the whole set right away, even if only one wheel is bothering you: a shade difference after painting shows up most next to the neighboring wheel. Check-in itself doesn't take long, but it's where we record the condition of each part before work — that's the basis for the warranty. We take bookings for a convenient time every day from 09:00 to 20:00, no days off. The advisor will tell you right away which work can realistically fit into a rush day and which is better not to hurry.
On-site within Almaty we do inspection and minor repairs on the spot, while straightening on the machine and painting are done at the shop on Makagali Makataeva, 129. Local repair of scratches and chips without full painting often settles the matter right at your car — if the damage is superficial and hasn't affected the geometry. The wheel straightening machine and paint booth stay at the shop: there we measure runout with a dial gauge and straighten to 0.3 mm, and dry the coating in the booth. An on-site visit is handy for assessing the scope: the technician will tell you right away whether straightening is needed or local repair is enough. Around the city we schedule visits by booking so the specialist arrives in the agreed window instead of waiting outside your building. If the inspection shows the part needs the machine, we book the car into the shop for the nearest available time.
We explain what cases the restoration warranty covers, what voids it, and how to treat your wheels in the first weeks after painting so the coating holds up.
You can bring your own paint, clear coat and primer, but we'll warn you in advance about the risks to layer adhesion, and painting just one wheel from a set is doable — though the shade may differ from the other wheels. We apply the paint system primer-base-clear and dry it in a paint booth where temperature and curing time stay stable. Powder coating cures at high temperature, and an exact match to the factory finish is almost never guaranteed by eye — in sunlight the difference between the old and new wheel shows up more. In my view, a set of four wheels always wins on color uniformity over a single painted one. If the goal is to fix a chip on one wheel, it's smarter to go with local scratch repair without full painting: the color stays factory and the defect disappears. Caption: options for painting one wheel versus a full set
Restoration brings a wheel back to working condition, but not every part is worth restoring. Here's a quick summary of the signs we use to decide.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe price of restoring one wheel in our service depends on the type of wheel (steel, alloy, forged), diameter (R13–R20), complexity of damage (scratches, chips, cracks, deformation), and type of coating (painting, polishing, powder coating). On average: steel wheel R15 – from 5,000 tenge, alloy R17 – from 12,000 tenge, forged R18 – from 15,000 tenge. The exact cost is determined after inspection. If crack welding or straightening of severe deformation is required, an additional 3,000 to 8,000 tenge per operation is added. The price includes all consumables: putty, primer, paint, varnish. We state the final amount before starting work; it does not change during the process.
Standard restoration of one wheel with painting takes from 1 to 2 working days. This is because several layers of primer, paint, and varnish need to be applied, and each layer must dry. If only polishing is required, we can do it within 4–6 hours on the day of request. If straightening, welding, or complex deformation is needed, the time increases to 2–3 days. Urgent restoration is possible in 1 day, but it costs 50% more. When handing in 4 wheels, we usually finish within 3–4 days. We state the exact time after diagnostics; it is fixed in the work order.
Yes, we provide a warranty on all types of restoration work. The warranty on painting and polishing is 6 months, on welding and straightening – 6 months. The warranty covers paint peeling, chips, corrosion, and re-deformation at the welding site, if not caused by mechanical impact. If defects appear during the warranty period, we fix them free of charge. Important: the warranty is valid if operating recommendations are followed, for example, avoiding aggressive chemical cleaning and impacts. We issue the warranty card along with the closing documents.
An appointment is recommended so we can plan the work and not keep you waiting. You can call or leave a request on the website – we will find a convenient time. But we also accept without an appointment if there are available technicians. In season (spring, autumn) the appointment may be several days ahead, so we recommend booking in advance. If you need it urgently, we will try to find a slot. When booking, specify the car make, wheel type, and nature of damage – this will allow us to estimate the time and cost immediately.
Yes, you can use your own materials if they are suitable for the wheel type and operating conditions. However, we are responsible for the final result, so inform us about your materials in advance, before starting work. The technician will check their suitability and compatibility. If the materials turn out to be of poor quality or unsuitable, we will suggest using ours – in this case the warranty will be full. If we work with your material, the warranty on the coating does not apply, as we cannot control its properties. This usually applies to tinted paint that is difficult to match.
If you find defects after restoration, we fix them free of charge under warranty. To do this, come to the service within the warranty period; we will perform diagnostics and eliminate the problem. If the defect is due to a technology violation (for example, paint peeling due to poor preparation), we will fix it at our own expense. If the cause is mechanical impact (impact, chemical exposure) – we will repaint for a separate fee according to the current price list. We are interested in a quality result, so we always meet the client halfway, even in a disputed situation.
Wheel polishing is used to remove scratches and restore shine, but it does not change the color and does not protect against corrosion for a long time. It is suitable for wheels with good paintwork, when you need to refresh the appearance. Polishing costs less – from 5,000 tenge per wheel, but the effect lasts about a year. Painting is a more serious job: the old layer is removed, chips are eliminated, new primer, paint, and varnish are applied. This provides protection against chips and corrosion for 2–3 years. Painting costs from 8,000 tenge per wheel. If there is deep corrosion or damage on the wheel, polishing is useless – painting is needed.
In the first 2–3 weeks after painting, avoid aggressive chemicals and high-pressure washing – the varnish must fully cure. Wash the wheels with a soft sponge and neutral shampoo and water. After driving on reagents or salt, rinse the wheels with cold water. Do not use abrasive pastes and hard brushes. Park carefully to avoid scratching the wheels on curbs. Once a month, you can apply a special protective wax for wheels. If small scratches appear, contact us immediately – we can polish them without full repainting. Following these recommendations will extend the coating life up to 3–4 years.
Payment for wheel restoration is possible in cash, by bank card, and by transfer. If the scope of work is large (for example, geometry straightening followed by painting), payment can be divided into stages: separately for the mechanical part and separately for the finishing. The cost depends on the condition of the wheel, the number of damages, and the chosen restoration method.
Yes, we provide on-site wheel restoration. Travel within Almaty is free for orders of 4 wheels or more. The on-site technician can perform polishing or minor scratch repair on site, without removing the wheels. If serious painting or welding is required, the wheels will need to be removed and brought to the service. The on-site technician will remove the wheels, and you will hand them to us or he will take them with him (only after agreement). The cost of travel for work on 1–3 wheels is 3,000 tenge. Travel is possible to any district of the city. Booking for on-site visit – one day in advance, by phone.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
Hit a pothole on the highway, bent a wheel on a Camry 3.5. The vibration was terrible. Came to CARGID, the technician looked at it and said it could be straightened. They did it in 2 days, painted it to match the color, now it's like new. Paid 18,000 tenge, though other places asked from 25. Thanks, I'll recommend!
The car is a Lexus RX, wheels R18. After parking, I found a crack on the inner side. I thought I'd have to replace it, it's expensive. But here they said they weld such things. They did it in 3 days, price 25,000 tenge, I'm satisfied. The crack is not visible, the wheel holds pressure. Thanks for saving me from buying a new wheel!
Restored steel wheels on winter tires for a Honda CR-V. The wheels were after winter — rusty, with chips. They did sandblasting and painted black, 12,000 tenge, one day. The paint went on evenly, it's been holding for the second season. Good, I recommend.
Ate, on a BMW X5 the R19 wheels were scratched and lost their shine. I decided not to replace but to polish them. The result — a mirror! The technicians did it perfectly, now the wheels are like from the showroom. 30,000 tenge for 4 days, true, long, but it was worth it.
My husband scratched all the wheels on a Kia Sportage against a curb. We came by recommendation to CARGID, they restored all 4 in a week. Painted in factory gray, the color matched perfectly. For everything we paid 60,000 tenge, it's cheaper than new ones. Nice guys, they work neatly.
All work was done, the wheels were restored. Toyota Camry, R17. After a heavy impact, the wheel geometry was distorted, the technician quickly straightened it. All in 2 days, 18,000 tenge. Not more than allowed, excellent result!
Came with a problem on a Nissan Juke: the wheels were all scratched and chipped after winter. The technicians suggested a full restoration, did it in 2 days, 15,000 tenge. The color was matched perfectly, you can't even tell the wheels aren't new. Now the car looks well-maintained, thanks!
I contacted them about a wheel rim on an Audi A6: after an accident, the rim was bent and a crack appeared. They fixed it for 28,000 tenge in 4 days. Everything is neat, no cracks visible, the geometry is perfect. I recommend this service.
On our Mazda CX-5, the rims lost their appearance: dull, scratches. They polished them, now they shine like a mirror. We paid 50,000 tenge for 4 rims, they met the deadlines. Thanks!
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.