

Local Bumper Repair
- Cause
- My wife scratched the bumper on a post in the yard.
- Found
- Deep scratches and scuffs, paint damaged down to the primer.
- Done
- Local body filler, painting and polishing of the damaged area.

We restore the bumper after an accident, scratches, or chips. Precise color matching, chamber drying, and factory materials. Warranty of 24 months on the paint coating.
Bumper painting services: from individual elements to full painting with repair.

We paint the molding or bumper trim. We remove it, prepare the surface, apply paint and clear coat — the part looks like new.

We paint the exhaust tip or bumper diffuser. We prepare the plastic, apply primer, paint and protective clear coat.

Local painting of the bumper corner on an area up to 30 cm. We remove scratches, match the color and apply the coating with a transition.

Full painting of the front bumper of a passenger car. We remove, prepare, paint and reinstall it.

Full painting of the rear bumper of a passenger car. Removal, preparation, painting and installation back in place.

Full painting of the SUV or crossover bumper. We take into account the dimensions of the part, prepare the plastic and apply the coating.

Painting the bumper with removal and installation. We remove the part, paint it separately, then put it back on the car.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
We show examples of bumper repairs and painting — with chips, cracks and parking marks.
Current prices for painting bumpers of all types — from spot repair to full painting with a mobile technician.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Bumper damage inspection and diagnostics | 30 minutes | 24 mo | Free |
| Spot polishing of the bumper (scratch removal) | 1–2 hours | 24 mo | from 5 000 ₸ |
| Painting of a decorative insert (molding, trim) | 1–2 days | 24 mo | from 8 000 ₸ |
| Painting of the bumper pipe/diffuser | 1–2 days | 24 mo | from 10 000 ₸ |
| Spot painting (scratch, chip) — up to 10 cm | 1 day | 24 mo | from 12 000 ₸ |
| Painting of one bumper corner (area up to 30 cm) | 1–2 days | 24 mo | from 15 000 ₸ |
| Painting of the front bumper (passenger car, sedan/hatchback) | 2–3 days | 24 mo | from 20 000 ₸ |
| Painting of the rear bumper (passenger car, sedan/hatchback) | 2–3 days | 24 mo | from 22 000 ₸ |
| Painting of an SUV/crossover bumper (full) | 2–4 days | 24 mo | from 25 000 ₸ |
| Bumper painting with removal and installation | 3–4 days | 24 mo | from 28 000 ₸ |
| Bumper painting with partial body filler (deep scratches, scuffs) | 2–3 days | 24 mo | from 18 000 ₸ |
| Bumper painting with crack repair (plastic welding) | 3–5 days | 24 mo | from 25 000 ₸ |
| Bumper painting with replacement of mounts/clips | 3–4 days | 24 mo | from 20 000 ₸ |
| Bumper painting with blending onto the fender (smooth color transition) | 3–4 days | 24 mo | from 30 000 ₸ |
| Express bumper painting (within 24 hours) | 1 day | 24 mo | from 35 000 ₸ |
| Mobile bumper painting (technician with equipment on site) | 1 day | 24 mo | from 40 000 ₸ |
| Bumper painting with full removal and polishing of adjacent parts | 3–5 days | 24 mo | from 32 000 ₸ |
Prices are for labor only and do not include materials. The exact cost depends on the condition of the bumper, the type of paint coating, and the scope of work. Free diagnostics when you visit the service center. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We remove the old paintwork and level the surface by hand so that the clear coat lays without waves or orange peel. Before priming, we degrease the surface, otherwise the paint will blister.
We remove the bumper from the clips and connectors, and do not touch up on the car — otherwise there will be drips along the edge and paint on neighboring parts. We put the clips and sensors aside separately.
We paint the trims, corner and diffuser as separate parts — we do not flood the entire surface with one color. The joint holds the line, and does not blur into a spot.
We cover peeling, blistering and craters on the painted area under normal use. If it starts, we repaint at our own expense, without disputes.
From diagnostics to polishing — 6 steps to the perfect bumper.

You leave a request or call us, we agree on a convenient time for the visit. The master assesses the damage, matches the color and calculates the cost of work.
request on WhatsApp
The bumper is carefully removed for convenient access to all surfaces.
inspection and diagnosticsWe eliminate dents and scratches, apply primer for a perfect base.
estimate before work starts
We paint in several layers with intermediate drying, then apply clear coat.
work to factory procedureWe dry in a special chamber for paint polymerization at the required temperature.
result check
We polish the surface to a mirror shine and install the bumper back in place. We check the quality together with you, and issue a warranty for the work and materials.
warranty in the work orderWalk-ins welcome. By appointment — no queue.

Send a photo of the damage, the car make and year to WhatsApp. We will give you a price range, the timeframe and help you pick a booking time.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

CARGID paints front and rear bumpers in Almaty with part removal, sanding down to P800, plastic primer and drying in the paint booth. We match the color by code and with a spectrophotometer to avoid color mismatch. Turnaround 1–2 business days, 24-month warranty recorded in the work order.
We start with an inspection: we check the depth of scratches, the number of damaged areas and the body type. This determines whether local treatment is enough, or whether the corner or the entire part needs to be treated.
| Work scope | When we choose it | What we do |
|---|---|---|
| Local up to 10 cm | Single scratch or chip | Spot sanding, primer, painting with blending |
| Corner up to 30 cm | Damage on the edge | Corner removal, body filler, painting |
| Whole bumper | Multiple areas or scratches down to the base | Full removal, preparation, painting |
| With crack repair | Crack or tear in the plastic | Welding, body filler, painting |
We weld and paint a crack in the plastic — it's one job, not two separate ones, and it appears as a separate line in the estimate. We weld along the entire length of the tear, reinforce with mesh from the inside, then level the surface with flexible body filler containing a plasticizer and apply primer. A scratch down to the base can't just be painted over — air will remain under the paint and the coating will blister, so body filler first, then primer. We treat a chip on the edge spot-wise, but we take the blend boundary into the crease so the spot doesn't show in the light. A deep scuff on the corner almost always requires treatment extending onto the flat surface — otherwise the blend is noticeable at an angle. We sand small chips on the edge spot-wise and prime locally so we don't remove an extra layer from the intact surface.
Our bumper painting in Almaty follows a single procedure — from removal to drying in the booth. On plastic, the result is decided not by the paint itself but by preparation and drying conditions. Let's go through the stages from removal to leaving the paint booth.
We remove the part from the clips and connectors rather than touching it up on the car — otherwise runs form along the edge and paint lands on adjacent body panels. Removal exposes the ends and the inner side: the technician sees whether the pins are intact, whether there are cracks under the trim, and paints the entire contour, not just the front surface. We put clips and parking sensors separately in bags — during assembly we don't mix up fasteners or lose connectors, and at the removal site you can see whether the pins are intact. Cars with parking sensors all around also come in: the connectors are fragile, and it's easier to disconnect them on a removed part than blindly from under the wheel arch. This approach saves fasteners and nerves during assembly. Before installation we check the fit without fasteners — if the gap has shifted, we correct the geometry before assembly, not after.
We sand the surface by hand down to P800 grit and degrease before priming — otherwise the coating blisters, and that's the most common cause of rework. We remove the old paintwork and level the surface so the clear coat lays without waves or orange peel; on deep scratches and scuffs we first apply body filler and bring the edge flush. Plastic primer is needed specifically for adhesion to plastic: regular primer holds worse on a bumper, and when the part flexes the layer peels along the edge. We sand without rushing: a missed spot under the primer will later show up as a crater in the clear coat, and the whole part will have to be redone. Then we treat the insert, corner and diffuser as separate elements. Handing over a car with a coating on such primer means getting peeling after the first parking by a curb; on flexible plastic, adhesion matters more than layer thickness.
A bumper differs from a fender even with the correct paint code: plastic and metal age differently. We show how we remove the boundary on a faded body and don't hand over a car with a spot.
We match the color by paint code and verify with a spectrophotometer — the device accounts for body fading, so the shade matches the fender, not the factory sample. The code from the badge gives the base formula, but over the years the body loses saturation under the sun, and the factory can no longer hits the tone. The spectrophotometer reads the spectrum from several points on the part, the colorist recalculates the formula for the actual shade and prepares spray-out samples on test panels. Painting the rear bumper starts with the same matching: the colorist compares the shade with adjacent body panels. On light metallics and pearlescents the code gives only the base: the pigment's tilt angle plays in the sun, so the colorist makes spray-outs and compares them with the part in daylight, not in the shop under lamps. We apply the spray-out on the same panel as the bumper, otherwise the primer of the substrate shifts the shade.
If the body has faded more than the bumper, we blend the color into the fender — the border is feathered across the adjacent panel so the seam stops being visible to the eye. The work goes in two layers: the base color is applied with overlap onto the fender, then the clear coat is tapered off across the surface, and after drying we polish the blend zone so the orange peel and gloss match the factory clear coat. A blend isn't always needed: on dark colors and fresh bodywork, an exact color match is enough, but on faded light metallic without a blend the border shows in the sun. On three-layer pearl a blend is almost always needed — even a slight pigment mismatch stands out there, and it's the first thing people notice at the wheel arch.
We break down how long painting takes stage by stage, what shifts the timeline, and when the work can be sped up without losing coating quality.
We give the painting timeline after diagnostics and estimate approval, and we count it from removal of the part, not from when the car enters the shop. Those days include sanding down to P800, degreasing, primer, base coat and protective clear coat, then drying in the booth at a set temperature. If the bumper came in with cracks, plastic welding and leveling the surface with filler are added to the cycle — curing to full strength and re-sanding take extra time. You can't pick up the car earlier not because of the queue but because of the clear coat: it gains hardness in the booth, and a wet coating picks up fingerprints and orange peel. We hand over the car only after a test drive and an inspection of the edges — that's where you see first whether the layers went on right.
We put the warranty term and conditions in the work order and the completion certificate, and before handover we check the result together with you. Below — what exactly the warranty on painting covers and what signs to check when accepting the car.
| Covers | Does not cover |
|---|---|
| Peeling and blistering of the coating | Accidents after repair |
| Craters and application defects | Third-party interference |
| Work performed | Normal wear of consumables |
| Parts installed | A part brought in by the client |
We've gathered the main things that determine the result of bumper restoration: from choosing the scope of work to putting the warranty terms in the documents. Below are five takeaways worth keeping in mind before your visit to the shop.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionOn average, bumper painting at our service takes 1-2 working days. If the bumper has cracks or requires plastic repair, the term increases to 2-3 days. The time depends on the complexity of the defects, the chosen type of painting (with or without blending), and the workload of the service. We always strive to complete the work within the agreed term, without compromising quality. Drying each layer takes time — only that guarantees the durability of the coating. So if you are promised painting in half a day, that's a reason to be wary: such fast work is usually done with violations of technology.
If the painting is done with blending technology, the transition border will be invisible. We use special solutions for seamless blending and polish the transition zone. However, on light colors, especially metallic, an ideal transition is harder to achieve, but our masters have many years of experience and achieve excellent results. If you chose full bumper painting, there will be no border at all — the entire bumper is covered with a new layer, and the main thing is to correctly match the color so that it matches the body. Our colorists use a spectrophotometer for precise matching.
We provide a warranty of 24 months for the paint coating of the bumper. The warranty covers defects that arose due to the fault of the service: paint peeling, bubbles, cracks, clouding of the varnish. To receive the warranty, you must comply with the operating conditions specified in the contract — for example, avoid mechanical impacts. If during the warranty period you find such problems, contact us — we will fix the defect free of charge. We are confident in the quality of our materials and the professionalism of our masters, so we boldly provide such a warranty.
Removing the bumper allows for a higher quality result, as the master has access to all its edges and inner surfaces, which eliminates drips and unpainted areas. In most cases, we recommend removing the bumper. However, if the car's design is such that removal requires a lot of labor (for example, some premium models), and the damage is minor, we can paint without removal, carefully protecting the adjacent parts. The cost of work with bumper removal is slightly higher, but the quality justifies the difference. The master makes the final decision after inspecting the car.
The price depends on the complexity of the work and the type of bumper. Basic bumper painting without additional repair costs from 25,000 tenge. If crack repair, puttying, or blending is required, the price increases to 30,000 tenge. We give the exact price after inspection and defect assessment — you can send a photo of the bumper via WhatsApp, and we will estimate the cost preliminarily. The price includes materials and labor, no hidden fees. Exact prices are in the price list on this page.
Yes, if the damage is small and the body color allows local repair, we can paint only part of the bumper with blending. This saves your money, as the cost of local painting is lower (from 15,000 tenge). However, for most bumpers that have damage in different places, it is more advantageous to paint the entire bumper — that way the result will be uniform. Local painting is possible only if the varnish is in good condition and there is no strong color fading. Our masters will assess the feasibility of such repair during inspection.
With proper technology and quality materials, bumper painting lasts 5–7 years without loss of appearance. Durability depends on operating conditions: aggressive chemicals, sand, ultraviolet can shorten the term. To extend the service life, it is recommended to regularly wash the car, avoid brushes at car washes, and promptly fix small chips. We use materials from world brands (Sikkens, Standox), which have high resistance to ultraviolet and mechanical impacts, so 7 years is already our average.
The color is matched in two ways: by the car's paint code (indicated in the VIN) or using a spectrophotometer that reads the factory color and provides a formula. We use both methods for maximum accuracy. Many cars even have a factory color that may differ from the sample due to fading, so the colorist compares the shade with the body and adjusts the formula if necessary. For metallic and pearl paints, the process is more complex, but our colorists have many years of practice and cope excellently with this task.
A small amount of dust in the varnish (so-called 'dirt' in the film) can appear even in an ideal chamber, but in a good service it is removed after polishing. If you find drips, orange peel, or dust that cannot be removed by polishing, it's a defect. You need to return to the service where the painting was done and demand the defect be fixed. At our service, we perform pre-sale polishing and quality control before handing over the car. If the defect is noticed later, during the warranty period we will repolish or repaint the problem area free of charge.
Yes, definitely. Deep scratches down to the plastic cannot be polished out — they will remain forever, and can also become a source of plastic corrosion, especially if it is reinforced with metal. In addition, such scratches worsen the appearance. Partial painting or full repainting of the bumper will solve the problem. Our masters will first carefully clean the damaged area, if necessary apply putty, primer, and paint. If the scratch is deep, plastic repair with reinforcing materials will be required, which we also perform.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
I spent a long time looking for a service where they would carefully paint the bumper after I hit a post in the parking lot. At CARGID they did it quickly, in 2 days, and the price was pleasing — 45,000 tenge. They matched the color perfectly, you can't even see the difference under a microscope. The craftsmen are great, thank you!
I got into a small accident, the front bumper cracked. I thought I would have to replace it, but the guys said it could be repaired. They did plastic welding, painted it — you can't see at all that there was a repair. For 80,000 tenge and 3 days they did a great job. The car looks like it just came from the showroom.
I contacted them because of chips on the hood and bumper. They painted the front bumper locally, the color matched perfectly. Thanks to the master, he explained everything, showed the stages of work. I'm happy with the result, finally it's not embarrassing to drive up to an expensive restaurant)))
I ordered painting of the rear bumper after parking for a long time near a store and everything was scraped. In the end the paint peeled off. Here they quickly removed the bumper, painted it, put it back. Price 55,000 tenge, term 1 day. Quality is excellent, very even color and gloss.
I want to leave a review about painting the bumper on my Kia. The guys did a great job, did everything carefully, matched the color, even though the car's shade is no longer new. The price was 65,000 tenge. I recommend the service, the masters know their trade.
Car wash, scratches on the bumper, I thought polishing would fix it, but no. I came to Garage, they advised painting. They did it in 2 days, price 70,000 tenge. The result exceeded expectations — the bumper is like new, color is 1 to 1. Thanks for the quality!
I spent a long time choosing where to paint the bumper after an accident, I was afraid that patches would be visible. But at CARGID they did it perfectly: removed the dents, painted, even restored the mounts. It came to 80,000, but it's cheaper than buying a new bumper. Very satisfied!
At the end of summer I had my car's bumper repaired. Very high-quality work, the color matched, and the term was on time. The staff are polite, explained everything. The price was 50,000 tenge, other places asked for more. Thanks!
Got caught in bad weather, the bumper was damaged. Had the front bumper painted. Everything went as usual, not my first time painting. Done quickly, in 1 day. Price 60 000. Quality is fine, though I am no expert, visually it looks good. Recommend.
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.