

Front bumper replacement
- Cause
- Severe impact to the front, bumper cracked.
- Found
- Bumper and mounts damaged, reinforcement partially affected.
- Done
- Replaced the bumper, repaired the reinforcement, painted with blending.

We restore Chery bodies of any complexity: from minor dents to sill replacement. We straighten geometry on a measuring bench and match the color by VIN. We give a 24-month warranty on work and a free inspection at a convenient time.
Body work for Chery: from panel beating to painting

We cut out the damaged section, weld in new metal, grind and protect against corrosion. The rocker panel is rigid and even again.

We measure control points on the straightening bench and pull the body back to factory parameters. We restore proper gaps and handling.

We straighten the dent with a special tool without damaging the factory paint. The paint and panel remain original.

We paint only the damaged area with a smooth transition to the factory color. The repair is invisible, the entire panel is not repainted.

We pull and tap the deformed element to a smooth surface. We prepare the metal for filler and paint.

We remove the bumper, sand, prime and paint it to match the body color. The plastic gets protection and an even gloss.

We prepare the fender: sanding, primer, painting with color matching. The part matches the rest of the body in color.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
We show examples of Chery body restoration: from deep scratches to fender replacement.
We'll give you the exact price after a free vehicle inspection.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Paintless dent removal | 1–2 hours | 24 mo | from 6,500 ₸ |
| Local painting | 1 day | 24 mo | from 10,000 ₸ |
| Straightening of 1 element | 2–4 hours | 24 mo | from 15,000 ₸ |
| Bumper painting | 1 day | 24 mo | from 20,000 ₸ |
| Fender painting | 1 day | 24 mo | from 25,000 ₸ |
| Door painting | 1–2 days | 24 mo | from 25,000 ₸ |
| Hood painting | 1–2 days | 24 mo | from 30,000 ₸ |
| Anti-corrosion treatment (comprehensive) | 1–2 days | 24 mo | from 30,000 ₸ |
| Raptor coating | 2–3 days | 24 mo | from 60,000 ₸ |
| Fender replacement with painting | 1–2 days | 24 mo | from 35,000 ₸ |
| Sill repair | 2–3 days | 24 mo | from 40,000 ₸ |
| Full body painting | from 5 days | 24 mo | from 200,000 ₸ |
| Body geometry repair | from 3 days | 24 mo | from 50,000 ₸ |
| Welding works | 1–2 hours | 24 mo | from 5,000 ₸ |
The exact cost depends on the condition of the body and the materials chosen. We work with premium-class materials. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We straighten the body on a measuring bench: first we measure the control points, then we pull. Without a bench, the distortion will remain in the openings and the door will rub.
We paint the bumper, fender, door in the booth at 60 °C. At this temperature, the clear coat polymerizes rather than drying on the surface, so it does not become cloudy.
One element — straightening, filler, painting — 3 days. It cannot be faster: the primer and clear coat must gain strength, otherwise shrinkage will occur.
We give 24 months for painting and geometry repair. We cover blistering, peeling, and geometry drift if the part hasn't been hit again.
We explain how Chery body restoration goes in our service — from the first call to handing over the finished car.

You submit a request on the website or by phone, we clarify the details and book a convenient time. At the service station, we inspect the damage, draw up an estimate and agree on the scope of work with you.
inspection and estimate
We select original or high-quality aftermarket parts and order them, often from supplier warehouses in Almaty.
OEM or aftermarketWe remove damaged parts, assess hidden defects, and report them before starting repairs.
hidden defects before repair
We pull, straighten and weld the metal, restoring the body geometry to factory parameters.
pulling, dent repair, weldingWe prepare the surface, paint in the booth using a color mix that exactly matches the factory color.
oven and color matching
We reinstall the parts, polish the transitions and check the gaps for compliance with the specification. We perform final quality control, wash the car and hand over the keys with a warranty on the work.
gaps and polishingWalk-ins welcome. By appointment — no queue.

Send a photo of the damage, the car make and year to WhatsApp. We will give you a price range, the timeframe and help you pick a booking time.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

We do Chery body repair in Almaty for Tiggo crossovers and Arrizo sedans: we fix dents without painting, weld sills, pull the geometry on a measuring bench, and paint in a booth with drying at 60 °C. We match the color by VIN, install OEM or aftermarket parts at your choice, and record a 24-month warranty in the work order.
The timeline for body repair is often set not by the work itself but by the part. It has to be chosen, ordered, waited for, and checked before installation, otherwise the gaps and mounts will let you down once the car is done.
Chery body repair in Almaty starts with choosing the part, and that decision is up to the owner: OEM, a quality aftermarket part, or your own spare. OEM bumpers, fenders, and hoods usually fit more precisely at the mounts and gaps, while aftermarket parts are more affordable and are often in stock at suppliers in the city. We order both, and before installation we test-fit the part on the car without painting: that way you can see whether the brackets, holes, and body lines match. If an aftermarket part needs adjustment, we tell you right away, before painting. You can also bring your own part, for example from a salvage yard, but the warranty doesn't cover it, so it's worth choosing an element without rust, traces of body filler, or stripped mounts. We hand the old removed elements back to the owner.
Most cars of the brand are crossovers with large plastic bumpers, trim panels, and electronics. That changes the order of work already at the disassembly stage.
Chery body repair on a bumper that holds parking sensors, a camera, and fog lights starts with careful removal of the electronics. We take out the sensors together with their holders, disconnect the connectors, and protect them from dust and paint, and only then do we weld cracks, level the plastic, and prep the bumper for painting. On the Tiggo 7 Pro and Tiggo 8 Pro, the bumpers have more electronics than on the Tiggo 4 and Arrizo sedans, so disassembly takes longer. A thick layer of paint on a sensor can cause false signals, so we coat the holders and the sensors themselves strictly according to the procedure. After assembly we check that the parking sensors work and the camera image is clear, and we set the bumper gaps relative to the headlights and fenders by the mounts, not by eye.
| Part | When we repair | When we replace |
|---|---|---|
| Bumper | Crack, scratches, dent in the plastic | Tear at the mounts, missing fragments |
| Arch trim | Scratches and scuffs | Broken clips, tear all the way through |
| Grille | Paint chips, minor scratches | Cracked ribs or mounting points |
| Bumper brackets | Loose fastening | Broken or deformed bracket |
Arrizo sedans and cars of the brand from earlier years more often come in with different tasks: chips and corrosion on the hood edges, scuffed sills, parking dents on the doors. Their trim is simpler and there's less electronics in the bumpers, so most of the work is on the metal. We remove dents with intact paint without painting, we open up a sill with a rust spot and, in case of through corrosion, weld in new metal, then seal the seam with anti-corrosion coating. On a used car we first look for traces of previous repair: a thick layer of body filler or old weld seams change the scope of work and the estimate. The owner is better off saying in advance what has already been repaired — that saves time during inspection and helps give a more accurate timeline. Winter road chemicals eat through the lower edges of doors and the arches fastest, so we inspect these areas on the lift even when the car came in with just one dent on a fender.
An impact to the corner of a crossover can shift the structural elements even if only cracked trim is visible on the outside. That kind of misalignment can't be fixed by replacing a single part.
We handle Chery body repair after a serious impact on a measuring bench. First we secure the car and measure the body's control points, comparing them with factory dimensions: that shows where and by how much the frame rail, pillar, or opening has shifted. Only after measuring do we start pulling, and we pull gradually and in several directions, checking every point. Without such a bench, the misalignment stays in the openings: the doors will rub and the new panels won't sit straight. When the pulling is done, we take a second measurement, confirm the factory specs, and only then move on to replacing the trim and painting. Damaged sections of metal that can't be pulled out we replace, and we seal the weld areas with anti-corrosion coating. At key stages we take a photo report so you can see the condition of the body before pulling and at the finish.
Owners are often surprised why a fender after a small dent isn't handed back the same day. The answer is in the materials, which need time to gain strength.
| Stage | What happens | Why |
|---|---|---|
| Panel beating | We bring the metal back to its original shape | Minimum filler on top |
| Filler and sanding | We level out minor imperfections | A flat surface with no waves |
| Primer | We apply the coat and let it cure | Protects the metal, base for the paint |
| Base and clear coat | We paint in the booth | Color and gloss for the part |
| Drying at 60 °C | Polymerization of the clear coat | The coating doesn't cloud or shrink |
| Polishing and reassembly | We remove dust particles and refit the part | Even shine and gaps |
We match the color for Chery by VIN code: it determines the factory paint code, and the colorist fine-tunes the shade with test sprays, because metallic varies slightly between different batches of cars. We paint in a spray booth with no dust or drafts, and dry the painted parts at 60 °C. At this temperature the clear coat polymerizes through its full thickness rather than just skinning over on top, so it doesn't cloud or shrink later. You can't rush the stages: if the primer and clear coat don't reach full strength, sanding marks and shrinkage will show up on the part a few weeks later. That's why one part with panel beating, filler and painting takes about three days. It's best to check the shade on the finished car in daylight and from different angles: that's how you see the difference in metallic that's invisible under lamps.
Body repair results are checked by eye at handover and by time. It's important to know what to look at on handover day and which cases the warranty covers.
We back Chery body repair in Almaty with a 24-month warranty on painting, welding and geometry. If within that period the coating blisters or starts to peel, or the repaired geometry shifts, we fix it at our own expense, and diagnostics for a warranty case are free. We record the term and conditions in the work order and the completion certificate when you pick up the car. The warranty covers the work performed and the parts we install. It does not cover a repeat accident or impact on the same part, interference by third parties, normal wear, or parts supplied by the client. Keep the work order until the term ends: with it, a warranty case is resolved quickly. If you have any doubts during use, it's better to come in for an inspection right away rather than wait for a minor defect to become noticeable.
Body repair on a crossover is not just painting but also parts, electronics and geometry. Here's what an owner handing the car to the shop should keep in mind.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost depends on the extent of damage and the Chery model: paintless dent removal — from 6,500 ₸, spot painting — from 10,000 ₸, bumper painting — from 20,000 ₸, fender replacement with painting — from 35,000 ₸. We give the exact price after a free inspection and defect assessment, which takes about 30 minutes. We lock in the final amount in the work order before work starts.
The timeline depends on the complexity of the work and parts availability. Paintless dent removal takes 1–2 hours, painting one element — 1–2 days, dent repair with filler and painting — about 3 days. Repair with replacement of several parts takes from 5 to 10 days; we record the exact timeline in the work order.
Yes, we give a 24-month warranty on Chery body repair and painting. It covers blistering and peeling of the coating, welds and geometry drift, as long as the part hasn't received new damage. We record the term and conditions in the work order.
It's better to book in advance: that way we can prepare the bay and order parts if needed. When you book, we clarify the nature of the damage and the scope of work. You can also come without an appointment — we'll inspect the car and set a convenient time for the repair.
Yes, you can bring your own parts and paint for Chery. Before work, we check their suitability and compatibility with the body and coating, and if they don't fit, we offer a replacement. The warranty does not cover parts you bring.
Come in for an inspection: we'll assess the condition of the paint and the body geometry, and find defects from previous repairs. Then we'll suggest a plan to fix it — from local repainting to re-straightening. Often the flaws can be corrected without completely redoing the part.
Local repair fixes damage in a limited area without painting the whole part, so it's faster and cheaper. Full repair includes straightening, filling, and painting the entire element. If the dent has no paint damage, local repair is enough, but for cracks, chips down to the metal, and corrosion, you need a full repair.
For the first 2–3 weeks after painting, don't wash the car with high pressure and don't use aggressive chemicals or abrasive polishes. Wash by hand with a soft sponge and don't leave the car in the blazing sun for long. After 3–4 weeks, you can apply a protective wax.
You can pay for Chery body repair in cash, by bank card, or by bank transfer for legal entities. Payment is after the work is accepted, and we agree on the final amount in the work order before the repair starts.
Yes, examples of Chery work are in the before-and-after section on this page. You can also come to the service and look at the cars currently under repair.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
Body repair of a Chery Arrizo at this service is just top-notch! The car was after an accident, I thought it was done for, but the guys straightened the longitudinal beams, replaced the fender, and painted it. The body geometry is restored, the gaps are even. They returned it after 7 days as promised. Thanks for the professionalism, from now on only to you!
I brought in a Chery Tiggo 8 Pro for door painting after a scratch in the parking lot. They matched the color perfectly, you can't even see the transition in the sun. Very polite technicians, they explained everything and sent the estimate in advance. The work took 2 days, the price is low. I was satisfied!
On a new Chery Tiggo, the bumper needed replacing. They did everything in a short time, put it in for painting the same day, and handed it over in 3 days. The color is very precise, there's no difference at all. The price is 248 thousand tenge, they gave a 24-month warranty. Excellent work, thank you!
I came in for hood repair on a Chery Tiggo. It was scratched in the yard, the hood was all covered in scratches and small dents. Here they restored it perfectly, painted it with a transition, you can't tell it from new. The cost is 310 thousand, they returned it after 5 days. Excellent service, not my first time here!
There was an unfortunate incident with the front fender on a Chery Arrizo. The guys quickly did the repair and matched the paint. I'm very glad I ended up at this service. The price is 96 thousand, which is quite reasonable for body repair. Thank you for your work!
Body repair of a Chery Tiggo 2, I had the front bumper replaced. They did everything properly, no extra charges, and completed it on time — 3 days. The paint quality is top-notch, the color is excellently matched. The price is 248,000 tenge, including the part. I'm satisfied, I've come here more than once, I recommend it to everyone!
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.