We'll bring your BMW body back to factory geometry and a perfect finish after an accident, corrosion, or just time. We handle any damage: from scratches to replacement of load-bearing elements. We work to the manufacturer's technology and give a 24-month warranty. Free inspection and a precise estimate before work begins.
We will determine the exact cost after a free vehicle inspection.
Service
Duration
Warranty
Price
Dent removal (per 1 panel)
from 2 hours
24 mo
from 19 500 ₸
Local painting
from 3 hours
24 mo
from 12 000 ₸
Bumper painting
from 1 day
24 mo
from 35 000 ₸
Fender painting
from 1 day
24 mo
from 40 000 ₸
Door painting
from 1 day
24 mo
from 60 000 ₸
Hood painting
from 1 day
24 mo
from 70 000 ₸
Roof painting
from 2 days
24 mo
from 80 000 ₸
Full body painting
from 5 days
24 mo
from 250 000 ₸
Anti-corrosion treatment (per zone)
from 3 hours
24 mo
from 35 000 ₸
Bumper repair (crack, chip)
from 4 hours
24 mo
from 15 000 ₸
Fender repair (panel replacement)
from 1 day
24 mo
from 35 000 ₸
Rocker panel / side member repair
from 2 days
24 mo
from 80 000 ₸
Hood replacement
from 1 day
24 mo
from 25 000 ₸
Raptor coating (local)
from 1 day
24 mo
from 180 000 ₸
Body polishing (1 zone)
from 2 hours
24 mo
from 12 500 ₸
Prices are indicated excluding the cost of materials. The final cost depends on the condition of the panel and the selected type of paint coating. Warranty periods — see the page «Warranty»
06
Why BMW owners trust CARGID with their bodywork
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
24MO
warranty on labor — the term is stated in the work order.
Booth painting with baking
Paint matching by code
Estimate before work starts
01
We paint in 3 layers
Primer, base, and clear coat — each with intermediate drying. The clear coat protects against chips and fading, so the color lasts longer.
02
Paint matching by code
We mix the paint according to the factory body code. This ensures the shade matches even on a faded part, without spots.
03
Repair in 2 days
We complete a bumper or fender in two working days. During this time the paint gains strength, and you can pick up the car.
04
24-month warranty
We give a 24-month warranty on painting and dent repair. We cover blistering, peeling, and color change if this is our defect.
07
How BMW body repair works
Steps.
We perform BMW body repair of any complexity: from minor scratches to replacement of load-bearing elements. We explain how the process goes.
01
Diagnostics and assessment
You leave a request or call, we clarify the details and book you for a convenient time. We assess the damage, check the body geometry, and prepare an estimate and timeline.
geometry measurement and estimate
02
Estimate approval
We agree on the list of works and parts and fix the cost in the work order.
work in the work order
03
Disassembly and defect detection
We remove the attached elements, identify hidden damage, and adjust the estimate if necessary.
hidden damage
04
Body work
We pull, straighten, and weld the damaged elements, and replace them with new ones if necessary.
pulling, panel beating, welding
05
Preparation for painting
We apply body filler, primer, and materials in full compliance with the technology.
body filler and primer
06
Painting and drying
We paint in a branded booth, match the color by computer, and dry at the required temperature. We assemble the car, polish it, perform quality control, and hand it over with a warranty.
BMW body repair in Almaty starts with an assessment of the damage and a geometry check, and the estimate only changes with your approval. We restore bumpers, fenders, hoods, sills, and side members, pull the body straight on a straightening bench, paint in three coats using the factory code, and give a 24-month warranty stated in the work order.
How BMW body damage is assessed
A visible dent is only part of the picture. How accurately we assess it determines whether the estimate matches the final bill and whether the repair has to stop halfway through.
What we check during the initial assessment
Impact point and neighboring parts: a hit to the fender often catches the bumper, headlight, wheel well liner, and hood edge, so we inspect the whole area.
Gaps and openings: widening gaps at the doors and hood point to body displacement, not just a dented panel.
Body geometry: we check it already at the assessment stage so we know right away whether a straightening bench will be needed.
Structural elements: we look at the side members, aprons, and sills from below on the lift, where deformation isn't visible from outside.
Fasteners and plastic: broken clips, brackets, and wheel well liners are also included in the estimate, otherwise the parts will sit crooked.
Signs of previous repair: a thick layer of body filler and a mismatched shade change the scope of work, so it's best to note them before starting.
Why the estimate is refined after disassembly
Some damage only shows up once the bumper, headlights and fender liners come off: a cracked bracket, a bent reinforcement bar, a crushed splash guard behind the fender. That's why we plan BMW body repair in two steps — a preliminary estimate from the inspection, then a refined one after disassembly. If we find something new behind the bolt-on parts, we stop the work, show the owner what we found in photos or in person, and change the estimate only with their approval. That way the final bill isn't a surprise at pickup. All approved changes go into the work order kept by the service advisor. You can also get a preliminary estimate from photos in a messenger, but for a hard hit it's always approximate: without a lift you can't see what happened to the structural parts. We take cars daily from 09:00 to 20:00, by appointment with no line, so the inspection won't take half a day.
Geometry after a collision and frame machine work
A hard hit can shift the body at the suspension and engine mounting points. Without restoring the geometry, new parts won't line up, and the car won't handle right on the road.
Signs of damaged geometry
Doors and trunk: they close hard, with effort, or don't catch the latch at all, even though the hinges and the doors themselves look fine.
Uneven gaps: the gap between the hood and fender is wider on one side than the other, or it tapers like a wedge.
Pulling straight ahead: the car pulls to one side, the steering wheel sits crooked, and the alignment can't be brought back into spec.
Uneven tire wear: one tire wears faster or along the edge, even though pressure and balancing are fine.
Glass and seals: the windshield cracks without a stone hit, and the door seals start whistling at speed.
Pulling on the frame machine and reference measurements
The body is secured on the frame machine and pulled along the reference points back to factory dimensions. We first measure the diagonals and the position of the mounting points, compare them with the manufacturer's dimensions, and only then pull the metal — gradually, in several passes, checking every step. After pulling, a damaged side member is repaired or replaced by welding, and the weld areas are coated with rust protection so the seam doesn't start rusting first. We install the bolt-on parts only once the geometry is back within tolerance: otherwise the gaps won't line up no matter how much you adjust the hinges. After pulling we always set the alignment and test-drive the car. Frame machine work takes longer than replacing a single panel, but the body gets its correct shape and road behavior back.
Plastic and metal in BMW body repair
A bumper and a fender break in different ways. The repair approach depends on the part's material, and the same crack is handled differently on plastic than on steel — the tools, the time and the prep for painting all differ.
How different parts are repaired
approach to plastic and metal damage
Damage
Plastic bumper
Metal panel
Dent without cracks
Heating and reshaping
Paintless dent removal or panel beating
Crack
Plastic welding from the back
Metal welding and rust protection
Torn mounting
Rebuilding tabs and clips
Straightening or replacing the bracket
Tear with missing material
Part replacement
Welding in a repair section or replacement
Deep scratches
Sanding and painting
Primer, painting, polishing
Repair or replace the fender and hood
BMW body repair can be done without replacing the part as long as the metal can be pulled out without tears or a thick layer of filler. If the fender is crushed with sharp creases, torn, or has already been repaired several times, we recommend replacement: a new part lasts longer and paints more evenly. The same rule applies to the hood, but safety comes into it too — a deformed hood holds the latch worse and can pop open at speed. The choice of part is up to the owner: OEM, aftermarket or their own part. We fit a new fender to the gaps at the door and bumper, paint it to match the body color, and put the fender liner and its mounts back in place. A bumper or fender is usually repaired and painted in two business days, while with a replacement the timeline depends on the part's delivery. If only the edge of the fender is damaged, it's often cheaper to weld in a repair section and keep the factory mounting points. We show and hand over the old removed parts to the owner so it's clear what was actually replaced.
Three coats of paint and Raptor protective coating
The paint job decides whether the repair will show in a year. That's why the coats and materials are chosen for the job: a factory look on a sedan or durable protection on an SUV.
Primer, base and clear coat with flash-off between coats
We paint BMWs in three coats — primer, base and clear — and dry each coat separately before applying the next. The primer levels the surface and separates the metal from moisture, the base gives the color, and the clear protects it from chips, fading and chemicals. Skipping the flash-off saves time, but later the coating can sink, develop dull spots and lose its gloss. We mix the paint by the factory body code and check the shade on a sample next to the car: that way the color matches even on a part that's sat in the sun for years. If needed, we blend into the adjacent panel. Before application we sand and degrease the part, and mask off the neighboring panels so paint mist doesn't settle on them. We polish the finished surface to bring back the depth of color.
When to choose Raptor coating
Raptor is a thick textured coating that protects metal and plastic from stones, branches and scratches. Unlike regular enamel, it forms a rough layer where small impacts don't chip down to the metal. It's most often applied to rocker panels, bumpers, wheel arches and the lower parts of doors, and BMW SUV owners sometimes coat the whole body with it. The coating has one catch: it doesn't give the gloss of factory paint, the surface stays matte and textured, and the color is chosen from the available palette. We apply Raptor to a prepared surface — we sand the old paint, remove rust and prime the chips. The coating works well for cars that often drive out of town, on gravel and in the mountains, where the body takes the most abuse.
Vehicle pickup and body warranty
The quality of body work shows at pickup, and reliability is proven over the warranty period. Both are worth checking carefully and without rushing.
How to inspect the car after repair
Lighting: check the body in daylight or under bright light, looking at the panel from different angles — that's how you spot a difference in shade.
Gaps: the gaps between the repaired panel and the neighboring ones should be even along the whole length, with no steps or misalignment.
Clear coat: there should be no runs, dust, orange peel or buffer marks on dark colors.
How components work: check the locks, window regulators, headlights and parking sensors if they were removed during the repair.
Notes before signing: anything that raises questions is easier to sort out with the technician on site, before signing the acceptance form.
24-month warranty and what it covers
Our BMW body repair in Almaty comes with a 24-month warranty on body work, painting and dent removal. If during this period our panel shows blistering, peeling or a change in shade through our fault, we repaint it free of charge, and diagnostics for a warranty case costs nothing. We record the term and conditions in the work order and the completion certificate when the car is handed over. The warranty covers the work performed and the parts we install, but does not cover an accident after the repair, third-party interference or a part brought in by the client. Before handover we check the car on a test drive, and at key stages of the repair we take a photo report. Keep the documents until the term ends: with them a warranty case is resolved quickly and without disputes.
Assessment, geometry and painting for a BMW body
A BMW body is restored to factory look when the repair starts with an honest assessment and ends with a careful acceptance. Here's what matters most for an owner to remember before visiting the body shop and when picking up the car.
Assessment: the whole impact area and the structural elements underneath are inspected, and the estimate is refined after disassembly only with the owner's consent.
Geometry: stiff doors, wedge-shaped gaps and pulling to one side point to misalignment, which is corrected on a frame machine using reference points.
Material: plastic is soldered and straightened with heat, metal is pulled and welded, and torn parts are more reliably replaced.
Painting: three coats with intermediate drying and color matching by the factory code give an even color with no mismatch.
Documents: warranty terms are recorded in the work order and the acceptance form, and any notes are resolved before signing.
10
Questions about BMW body repair
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The price depends on the extent of damage, the complexity of the work, and whether parts need to be replaced — OEM or aftermarket. On our price list, dent removal starts at 19,500 ₸, bumper painting at 35,000 ₸, and full body painting at 250,000 ₸, with materials billed separately. Welding, color matching and hidden damage also affect the price, so we give an exact estimate after inspection and lock it in the work order.
The timeframe depends on the scope of work and parts availability. We remove a dent without painting in 2 hours or more, do local painting in 3 hours or more, paint one element in 1 day or more, and repair a sill or side member in 2 days or more. Full body painting and complex post-accident repair we plan from 5 days, and we agree on the timeframe before work starts.
BMW body repair, painting, rustproofing and geometry restoration come with a 24-month warranty. It covers blistering, peeling and color change if that's our defect. We record the term and conditions in the work order at intake and in the handover report when you pick up the car.
Yes, booking is recommended, especially for painting and complex work — that way you get a convenient time and won't have to wait. You can book by phone or via WhatsApp. If it's urgent, for example after an accident, call us — we will try to fit you in within the next few days. You can also come without a booking, but if the service center is busy, the waiting time may increase.
Yes, we work with the client's parts, including original BMW body elements. Before starting, the technician checks that the part is complete and fits, and if fitting is needed, we agree on it separately. The warranty covers our work, but not the part you bring.
If you discover defects after the repair, contact us within the warranty period. We will fix the defects free of charge if they arose through our fault. In disputed situations, we conduct an independent examination by agreement. We care about quality, so when you receive the order, inspect the car together with the technician and sign the certificate of completed work.
There are four main options: local repair of a dent or chip, dent removal with body filler and painting, part replacement, and restoring the body geometry. Local repair is faster but only works for minor damage, while for crushed or torn metal it's more cost-effective to replace the part. We restore geometry on a straightening bench if the body dimensions are off after a hit.
For the first two weeks, do not wash the body with high pressure and do not apply wax to the fresh coating. Avoid sharp temperature changes and parking under tree sap during this period. After a month, you can return to normal care, including polishing and protective compounds.
You can pay in cash, by bank card, or by bank transfer, and for companies — by invoice. Payment is after the work is accepted, and the final amount is fixed in the work order before repair begins. The amount depends on the area of damage, straightening bench work, and the materials chosen.
Yes, local painting of one element is possible. We match the color by the BMW paint code and with the help of computer matching, and we also blend into adjacent elements so that the color does not differ. When using high-quality paints and clear coats, the blend is unnoticeable. In rare cases, if the body has faded heavily or has tinting, we recommend painting the adjacent parts — the technician will warn you about this in advance.
11
BMW owner reviews
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Azamat
BMW X5
I got into an accident in a BMW X5, the rear fender was dented. At CARGID they did everything in 5 days, the price was 320 thousand tenge. Very satisfied, they matched the color perfectly, even after the repair you can't find fault with the body. Thank you!
Dmitry
BMW 5 Series, I scratched the door against a post in the garage. I went to CARGID, they did a local repair in 2 days, 85,000 tenge. The paint laid down great, the repair spot can't be found. I recommend!
Sergey
BMW X3 after
Body repair of a BMW X3 after an accident. They replaced the front fender and repaired the bumper. They finished in 6 days, the price was 280 thousand. Thank you for the promptness and quality!
Aigerim
BMW 7, I scratched the front bumper while parking. At CARGID they quickly assessed it, did the repair in 3 days, 150,000 tenge. Very neat, thank you!
Yerlan
BMW X5 for
I brought in a BMW X5 for repair after an accident, the rear part was damaged. They restored the geometry and replaced the fender. Satisfied as can be! The price was 450 thousand, the timeframe 10 days. The guys did great.
Olga
BMW 3, scratches on the door. They did polishing and painting of one element. I got the car back after 2 days, 40 thousand. Very satisfied, the color matched 100%.
Bauyrzhan
BMW X6
BMW X6, a chip on the hood. Local repair in 1 day, 25,000 tenge. Fast and high-quality, you can't see that anything was there. Thank you for the work!
Igor
BMW 5, after a hit to the door. They did pulling and painting. The car is like new, 3 days, 120 thousand. Thank you CARGID, from now on only to you!
Aliya
BMW 4, the fender was scratched in the yard. I went to CARGID, they did the repair in 2 days, 95,000 tenge. Very high-quality, I paid a little more than I thought, but the result is excellent.