

Chip on the hood
- Cause
- Chip on the hood from a flying stone, corrosion began.
- Found
- Deep scratch down to the metal, rust spot.
- Done
- Sanding, primer, blending paint and polishing.

We fix scratches, chips, and scuffs without repainting the entire body. We match the color by code or computer, apply clear coat, and polish. We work with all types of paint coatings — metallic, pearl, matte. 24-month warranty on all work.
We spot paint body parts: from bumper and fender to mirror and molding.

We prepare the surface, apply primer, and paint one part — a bumper, fender, etc. We match the color to the body so the part doesn't stand out.

We paint the exterior side of the door: sanding, primer, color matching to the body, and applying paint with clear coat.

We locally paint a section of the fender and create a smooth color blend onto adjacent parts so the repair boundary is invisible.

We paint the hood with blending onto the fenders. If the hood is large, we work over the entire area with preparation and clear coating.

We remove or mask the part, prepare the surface, and paint the trunk lid in the body color with a clear coat.

We remove the bumper, prepare the plastic, paint it completely, and reinstall it. The client gets an even color and neat gaps.

We paint the side mirror housing: disassemble, prepare the plastic, apply paint in the body color, then reassemble.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
Real examples of paintwork restoration.
Prices are for labor only and do not include the cost of materials. The exact cost depends on the car make, color, and complexity of the damage.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Master's visit for inspection and assessment (within the city) | 1–2 hours | 24 mo | from 3 000 ₸ |
| Paint coating diagnostics (thickness measurement, color matching) | from 1 hour | 24 mo | from 2 000 ₸ |
| Polishing of a local area without painting (scratch removal) | from 2 hours | 24 mo | from 5 000 ₸ |
| Painting of one element (e.g., bumper, fender) with preparation | from 1 day | 24 mo | from 30 000 ₸ |
| Door painting (exterior) with preparation and color matching | from 1 day | 24 mo | from 35 000 ₸ |
| Local painting of a fender (front or rear) with blending | from 1 day | 24 mo | from 25 000 ₸ |
| Hood painting (with blending onto fenders) – depends on size | from 2 days | 24 mo | from 45 000 ₸ |
| Trunk lid painting | from 1 day | 24 mo | from 30 000 ₸ |
| Bumper painting (full) with removal/installation | from 1 day | 24 mo | from 30 000 ₸ |
| Repair and painting of the rocker panel (welding, body filler) | from 2 days | 24 mo | from 25 000 ₸ |
| Side mirror painting (housing) | from 4 hours | 24 mo | from 10 000 ₸ |
| Molding or trim painting (per 1 pc.) | from 4 hours | 24 mo | from 8 000 ₸ |
| Local painting of a scratch on the door (up to 10 cm) with polishing | from 3 hours | 24 mo | from 8 000 ₸ |
| Painting of chips on the hood (per 1 chip) | from 1 hour | 24 mo | from 3 000 ₸ |
| Rocker panel painting (locally, without welding) | from 5 hours | 24 mo | from 15 000 ₸ |
| Wheel arch painting (locally, with rust removal) | from 5 hours | 24 mo | from 20 000 ₸ |
| Part painting with blending onto adjacent elements (per 1 blend) | from 3 hours | 24 mo | from 5 000 ₸ |
| Application of anti-gravel film to a local area (option) | from 2 hours | 24 mo | from 7 000 ₸ |
| Polishing of a freshly painted area for gloss | from 1 hour | 24 mo | from 3 000 ₸ |
| Urgent local painting (same day, if a slot is available) | from 5 hours | 24 mo | from 15 000 ₸ |
| Mobile local painting (without a booth, with limitations) | from 3 hours | 24 mo | from 20 000 ₸ |
The final cost depends on the complexity of the color (metallic, pearl) and the condition of the surface. Warranty on work — 24 months. We will calculate the exact estimate after inspection at the service station. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We achieve color matching by stretching the blend onto adjacent parts, not just along the edge. That's why the transition boundary is invisible both in sunlight and under a lamp.
We keep the part in the booth at 60 °C — the clear coat gains hardness in 40 minutes. When air-dried, it remains soft for weeks.
We remove handles, moldings, and mirrors before painting. The paint lays evenly under the seal, and later nothing peels off at the edge.
We cover peeling, craters, and color mismatch at the blend area. If the defect is ours, we repaint the element at our own expense.
From request to vehicle pickup — 6 clear steps.

You submit a request, we clarify the details and schedule you for a convenient time. A technician inspects the damage and prepares an accurate estimate for the work.
request on WhatsApp
We match the shade by code and reference samples and agree on the result with you.
inspection and diagnosticsWe clean, sand, and prime the area for perfect adhesion.
estimate before work starts
We apply paint and clear coat in a branded booth with strict adherence to technology.
work to factory procedureWe polish the blends and the surface to hide the boundaries.
result check
We dry the coating and check the quality under different lighting. We return the car with a warranty and care recommendations.
warranty in the work orderWalk-ins welcome. By appointment — no queue.

Send a photo of the damage, the car make and year to WhatsApp. We will give you a price range, the timeframe and help you pick a booking time.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

At CARGID, local car painting in Almaty means painting a specific area or panel with color matching by code and spectrophotometer, plus a blend into adjacent panels so the boundary is invisible. We cure in a booth at 60 °C and document a 24-month warranty in the work order.
The main fear for owners is getting a 'spot' visible from three meters and having to come back for a redo. The boundary is removed by technology, not by 'eyeballing it': color matching and blending work together.
We match color by the body code and verify with a spectrophotometer based on actual fading, because the factory code on a used car almost always differs from the real shade. The code gives a base formula, but metallics and pearls 'shift' with angle: on three-layer finishes the top layer is semi-transparent, and the final tone depends on base thickness. The spectrophotometer reads the shade from several points on the panel, and the formula is adjusted for the specific body, not a catalog sample. Local painting in Almaty is built on this precise matching so the blend area matches the rest of the body. Then we spray a test card and compare it with the adjacent panel. The code gives a base, not the final formula—in sunlight and under a lamp the shade reads differently, so we check under two types of lighting before polishing.
We break down the criteria for honestly determining the scope of work: so we don't push extra services and don't 'paint over' a problem that needs a deeper fix.
| Damage | Depth | What we do |
|---|---|---|
| Scratch in the clear coat | down to primer | polishing the area without painting |
| Chip on the hood | down to metal | local painting of the chip |
| Scuff on the door | down to primer, up to 10 cm | painting the scratch with polishing |
| Rust on the wheel arch | metal corrosion | sanding, primer, painting the arch |
| Crease or large area | deformation | painting the panel with blending |
Paint applied over rust doesn't last long—corrosion continues under the layer and lifts the coating in blisters from the inside. A corrosion spot on an arch or sill develops from the edge toward the center: first the clear coat swells, then the base layer peels, and within a few months a bumpy crust appears where the spot repair was. Anti-corrosion primer works only on clean metal—it doesn't bond to oxides, it just masks the process. Surface prep matters more than the painting itself: the technician sands the spot to bare metal, treats it with a converter, applies epoxy primer, and only then matches the shade. Rust can't be 'preserved' with primer: if the spot isn't sanded to clean metal, the defect returns in a season in the same place and over a larger area.
Spot work covers an area with blending into adjacent panels, while painting the whole panel removes the panel and covers its entire surface. In the first case, the technician works by zone: polishes the edge, applies base with a smooth transition, and covers with clear coat extending 15–20 cm so the boundary dissolves into the original finish. In the second, the panel is removed—handles, moldings, mirrors taken off—painted completely, and cured in a booth, which gives an even tone across the entire surface. Partial body painting saves on labor but requires more precise color matching: the smaller the area, the more noticeable any shade difference, especially on faded enamel. On large panels—hood, roof, full door—we more often recommend full painting with blending: a spot in a visible place is harder to hide than to cover the entire surface.
Local painting isn't 'spraying a spot'—it's a chain of operations where each one supports the next. We show what the work consists of and why saving on any step comes back as a redo.
Plastic is prepped separately from metal — it gets degreased, sanded, and coated with an adhesion layer made for plastic, otherwise the paint doesn't hold well. First we take the bumper off the body: that way the edges and mounting points get treated, the spots you can't reach with the bumper on the car. Then comes sanding from coarse grit to fine, degreasing, and the adhesion primer — it works as the link between the smooth plastic and the enamel. Only after that do we lay down the base and clear coat. You can't use the same product on a bumper as on metal: without the adhesion layer the paint peels off the plastic when it flexes — and a bumper flexes at every parking job. Before painting, we open up cracks and chips and reinforce them, otherwise they show through the fresh coat within one season. That's exactly how local car painting works: each step holds the next one up, and skipping one means coming back for a redo.
Here's what makes up the duration of the job and why a paint booth at 60 °C changes how the clear coat cures — that's what decides which day you can pick up the car.
| Work | What we do | What the duration depends on |
|---|---|---|
| Chip on the hood | spot painting with polishing | number of chips |
| Scratch on the door up to 10 cm | local painting with polishing | depth of the damage |
| Fender with a blend | painting with a blend onto the adjacent panel | blend area |
| Bumper with removal | full painting with removal and installation | condition of the plastic |
We keep the panel in the booth at 60 °C — the clear coat hardens in 40 minutes, while in open air it stays soft for weeks. In the paint booth the temperature and airflow stay steady, so the clear coat cures evenly across the whole area, not just at the edge where the layer is thinner. We do rush painting same-day if there's an open slot; mobile painting is done without a booth, so its coating durability is lower than in-shop. A soft clear coat easily picks up fingerprints and micro-scratches at first — better not to put a tight cover on the car or rub the area right after pickup. Let the coating gain strength for at least the first day: in our experience, that's when random scuffs show up at the edges of doors and the hood.
We put the warranty term and conditions in the work order and the completion certificate, spell out separately which cases aren't covered, and explain how to book and how to care for the area after painting.
Diagnostics for a warranty case are free — the service advisor inspects the area, checks it against the photo report from each stage of the repair, and decides whether to repaint the whole zone or fix it spot by spot. We take the photo report at key stages, so you can see how the prep went down and how many coats of clear went onto the panel. Come in for the inspection during working hours, 09:00 to 20:00, seven days a week — the advisor is usually free in the first half of the day. The sooner you show the defect, the easier it is to fix: a fresh area gets spot-repainted, while a neglected spot already needs the whole panel painted. Waiting for it to "go away on its own" is pointless — under the clear coat film the defect spreads, and the scope of work grows with it.
We take you by appointment, no lines; we accept customer materials with a limited warranty, and after painting you should hold off on aggressive washing and wax on the area for the first few weeks. If the owner brings their own paint or clear coat, the warranty covers only the quality of the work, and the material's behavior is the supplier's responsibility — we write that clause into the work order as a separate line. Clear coat doesn't reach full hardness right away: in the booth at 60 °C it hardens in 40 minutes, but final curing takes weeks, so abrasive polishing and a stiff brush in the first month undo the booth's work. Wash the body with a soft sponge, no abrasives, don't wax the fresh area until it's fully cured, and show chips to the advisor right away — inspection under warranty is free.
Painting a single area comes down to three decisions: where the blend line goes, how much of the panel to paint, and which prep steps you can't skip. Below is a short summary you can use to check the estimate and the work.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost of spot painting at our auto service starts from 15 000 tenge for a small element (e.g., fender or door) and can go up to 50 000 tenge and above. The price is influenced by: the size of the damaged area, the complexity of the color (metallic, pearl, three-layer coatings require more thorough matching), the need for straightening or puttying, the condition of the paintwork, and the car brand. We quote the exact cost after inspection; it is fixed in the work order and does not change during the process.
Usually spot painting of one element takes from 3 to 6 hours. The time depends on the scope of work: if only painting without straightening is required, we finish in 3-4 hours. If there are dents requiring straightening, or complex color matching, it may take up to 8 hours. We always give exact timelines after diagnostics. In most cases, you can pick up the car the same day if you dropped it off in the morning.
Yes, we provide a warranty on all types of painting work — 24 months. The warranty covers the quality of coating application: absence of bubbles, peeling, chips in the painting area, as well as color and gloss retention. If defects related to our work are found during the warranty period, we will fix them free of charge. The warranty does not apply to mechanical damage after painting (e.g., in an accident) or violation of paintwork care rules.
We recommend booking in advance to guarantee a convenient time for you. On weekdays there are usually free slots, but on weekends and before holidays the schedule may be booked 2-3 days ahead. You can book by phone or via messengers. If you come without an appointment, we will try to accommodate you, but you may have to wait. Booking is free and does not obligate you to anything.
You can bring your own materials or spare parts, but we are not responsible for their quality and compatibility. In this case, the warranty on the work result is preserved, but only for the painting process itself, not for the materials. If the paint is defective or unsuitable, repainting will be paid. We recommend using our materials — we work with trusted suppliers, which guarantees coating durability and exact color match.
If after painting you notice any defects (bubbles, drips, uneven color, scratches), within the warranty period (24 months) we will fix them free of charge. To do this, contact us, describe the problem and bring the car for inspection. It is important not to try to fix defects yourself — this may void your warranty. We will record the claim, perform diagnostics and promptly fix the problem at a convenient time for you.
We have three options for spot painting, differing in price and quality. Basic — painting using standard materials, suitable for undemanding colors, price from 15 000 tenge. Standard — includes color matching using computer spectrophotometers, primer and varnish application, 24-month warranty, price from 25 000 tenge. We recommend standard as the optimal price-quality option. Exact prices are in the price list on this page.
After painting, for the first 30 days avoid high-pressure washing and aggressive chemicals. Hand washing with a soft sponge and neutral shampoo is allowed. During this period do not use wax and polishes — they can disrupt the polymerization process of the varnish. Also try not to park under direct sunlight for long periods. After a month, you can apply protective wax. These measures will help preserve color and gloss for a long time.
You can pay for spot painting in cash or by bank card. The cost depends on the area of damage, number of paint layers and the need for surface preparation. The exact amount is given by the master after inspecting the car.
The work includes: surface preparation (degreasing, sanding, if necessary puttying and priming), color matching (computer or catalogs), application of base coat and varnish in the spray booth, drying and quality control. We also mask adjacent elements to protect them from paint. Additionally, polishing of the transition area may be required if agreed. All work is recorded in the work order, which you sign before starting.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
Came in with a scratch on the door after unsuccessful parking. They did it in 2 days, price 30 000 tenge, very prompt. They matched the color perfectly, now you can't even notice where the damage was. Thanks for the quality!
I left the car for bumper painting, was afraid it would be noticeable. The result exceeded expectations — the bumper looks like new! They finished on time, I paid 40 000. I recommend!
Many scratches on the trunk lid, thought a full repaint was needed. They advised spot painting, I saved a lot of money. Everything was done in a day, price 25 000. Excellent service!
A chip on the hood turned into rust. The craftsmen at CARGID quickly removed the corrosion and painted locally. Now the hood is perfect. Thanks for the professional approach!
Recently I had scratches on my car repaired. The spot painting was done very well, the color matched exactly. It was ready in 2 days, the price was 28 000 tenge. Thank you!
Scratched the fender on the fence, thought it would be expensive. They did it locally for 28000 tenge, the quality is super, you can't tell it was painted. I recommend!
I contacted them about scratches on the door, they did spot painting. They did it quickly and with quality, the color is perfect, no transitions. Now only to you!
Chips on the hood were removed in 2 days, price 25 000. Done perfectly, you can't even notice. I'm happy with the service, will recommend to friends.
They painted the fender for 28000, the term is 2 days. Everything is perfect, the color is beautiful and durable. Thanks for the professionalism!
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.