We restore Fiat bodies of any complexity: from scratches to sill replacement. We work with Ducato, Doblo, 500L, and other models. We use quality materials and provide a 24-month warranty on all types of work. Diagnostics and an exact estimate — before repair starts.
We carefully fix your Fiat's body damage: from scratches to complex deformations with geometry restoration.
Service
Duration
Warranty
Price
Body diagnostics (inspection, measurements, detection of hidden damage)
30–60 min
24 mo
from 5 000 ₸
Body polishing (removal of scratches, holograms)
2–4 hours
24 mo
from 19 000 ₸
Paintless dent removal (PDR)
1–3 hours
24 mo
from 13 000 ₸
Bumper repair (cracks, chips, bends)
3–5 hours
24 mo
from 20 000 ₸
Bumper replacement
1–2 hours
24 mo
from 12 000 ₸
Fender repair (replacement, straightening)
2–4 hours
24 mo
from 18 000 ₸
Hood repair (straightening, replacement)
2–3 hours
24 mo
from 15 000 ₸
Door repair (straightening, replacement)
3–5 hours
24 mo
from 20 000 ₸
Repair of rocker panels and side members
from 1 day
24 mo
from 35 000 ₸
Fender replacement (welding, painting)
from 1 day
24 mo
from 40 000 ₸
Hood replacement (with painting)
from 1 day
24 mo
from 45 000 ₸
Door replacement (with painting)
from 1 day
24 mo
from 50 000 ₸
Rear fender repair (replacement, straightening)
from 1 day
24 mo
from 30 000 ₸
Body geometry restoration (straightening bench)
from 2 days
24 mo
from 80 000 ₸
Body corrosion elimination (rust spots)
from 2 days
24 mo
from 50 000 ₸
Full body painting (with preparation)
from 5 days
24 mo
from 350 000 ₸
Painting of one element (excluding material cost)
1–2 days
24 mo
from 15 000 ₸
Urgent body repair (specialist visit)
from 2 hours
24 mo
from 25 000 ₸
The exact cost depends on the Fiat model, the nature of the damage and the cost of materials. Customer visits and minor on-site repairs are possible. Warranty periods — see the page «Warranty»
06
Advantages of Fiat body repair at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
24MO
warranty on labor — the term is stated in the work order.
Geometry checked against control points
3-stage polishing
Repair in 2–4 days
01
We fix geometry first
We align body parts to control points on the frame machine, and check gaps with a feeler gauge. Without this, a door or hood will sit crooked and rub.
02
Three-stage polishing
Abrasive paste removes scratches, then anti-hologram polish and a protective compound. No wax for speed — it will wash off after a couple of car washes.
03
Repair in 2–4 days
One day for disassembly, one day for straightening and welding, one day for assembly and polishing. That is how long it takes if you do not wait in line for the paint booth.
04
24-month warranty
We cover seams, fasteners, and geometry after repairing a fender, hood, or bumper. If a part shifts or a seam separates, we will redo it.
07
Fiat body repair stages
Steps.
We explain how we restore the factory geometry and appearance of a Fiat body — from request to handing over the keys.
01
Inspection and Estimate
You leave a request or call, we clarify the damage, and schedule a convenient time. The service advisor inspects the car, records defects, and agrees on a preliminary estimate.
inspection and preliminary estimate
02
Body Diagnostics
The technician removes the bolt-on elements, assesses hidden damage, and draws up an accurate plan.
hidden damage
03
Disassembly and Removal
We remove parts that hinder repair: bumpers, headlights, fenders, which speeds up work and eliminates runs.
bumpers, headlights, fenders
04
Straightening and Welding
We pull out dents on the frame machine, weld reinforcements, and remove corrosion, restoring geometry.
frame machine and welding
05
Body Filler and Primer
We apply body filler, sand to perfection, prime, and prepare the surface for painting.
body filler, sanding, primer
06
Painting and Drying
We match the color by code, paint in the booth, and dry at temperature to ensure durability. We install the parts, polish, check the gaps, and hand over the car with a warranty.
We take on Fiat body repair in Almaty for the Ducato, Doblo, 500L, Albea, and other models: we straighten and weld metal, align panels to control points on the straightening bench, match color by code, and paint in the booth. We start work after a written estimate, and we record a 24-month warranty on seams, fasteners, and geometry in the work order.
Where a Fiat Body Gets Damaged
The Fiat lineup on our roads is very diverse: a work van, a compact van, and a city sedan each take damage in their own way. That's why we build the inspection around the model and how the car is used every day.
Weak Spots by Model
Typical areas to watch on each model
Model
Where damage is most common
What we check during inspection
Ducato
Rear swing doors, rear bumper corners, cargo area side panels
Hinges, locks, flatness of large panels
Doblo
Sliding door, rear doors, rear wheel arches
Sliding door opening, movement along the tracks
500L
Bumpers, front fenders, lower door edges
Bumper mounts, gaps to the headlights and hood
Albea
Sills, wheel arches, lower doors and trunk lid
Corrosion under the paint, signs of previous repairs
Any model with impact to the structural area
Frame rails, door openings, suspension mounting points
Geometry at control points
Signs of Damage Deeper Than the Paint
Sliding door: it only closes with a slam or catches on the body — meaning the opening or track shifted from a side impact.
Gaps: the gap between the door and fender is wider at the top than at the bottom, or the hood sits higher than one of the fenders.
Leaks: water shows up in the cabin or cargo area in rain or at the car wash, even though the seals look intact.
Cracked sealant: the factory seam where panels meet has cracked — the metal around it was flexing and may have deformed.
How the car drives: the van pulls to one side and the tires wear unevenly — it's worth checking the suspension mounting points to the body.
Bubbled paint: blisters on a sill or door edge almost always mean corrosion has gone deeper inside than what's visible outside.
Old repair: different gloss on neighboring panels and thick filler give away a previous repair that also needs to be assessed before the estimate.
Repair Specifics for Ducato and Doblo Vans
A van earns money every day, and for the owner not only quality matters but also downtime. That's why we agree on the scope of work in advance and don't open up unnecessary areas.
Large Panels and Rear Doors on the Ducato
Fiat Ducato body repair at our shop usually starts with the rear swing doors, bumper corners, and side panels: vans get backed up to loading docks, hit poles and ramps. The Ducato side panel is a big flat surface, and any wave shows. If you just fill a dent with body filler, it will show as a spot in the sun at an angle, so we first pull the metal as close to its original shape as possible and apply filler in a thin layer. On the rear doors, we check the hinges and their mounting to the opening: a bent hinge causes misalignment, and the lock stops catching the striker. We inspect the high roof and cargo floor on a lift — we have six in the shop, so we lift the van fully and see if the floor and frame rails are damaged. Tip for owners: don't drive with a rear door that won't close, as the hinge misalignment only gets worse on the road.
Sliding door and openings on Doblo
On the Doblo, after a side impact, the sliding door opening is the first to suffer. The door hangs on tracks and rollers, and if the opening shifts even slightly, it starts to catch, doesn't close fully, or lets water and dust through the seal. A common mistake is to immediately adjust the roller and lock: the door seems to close, but the rollers wear out faster and the gap keeps changing. We do Fiat Doblo body repair in a different order: first restore the geometry of the opening and track, then hang the door, and only then adjust. We check the gaps around the perimeter with a feeler gauge and test the door movement several times with different force. The rear doors on the Doblo can be swing-out or a single hatch, and the logic is the same: first the opening, then the hinges and lock. The owner gets a door that closes smoothly and without effort, and the cargo area no longer lets in dust and water.
Body geometry and choosing the repair method
The repair method is chosen based on the condition of the metal and paint, but any method depends on geometry. A part installed off the factory points will rub, whistle at speed, and let water in, no matter how much you adjust it.
How we align parts to control points
We start Fiat body repair in Almaty by asking whether the body is straight, not just looking at the dent. After a significant impact, you can't just bolt a part back into the holes: if the foundation is bent, a new fender or hood will repeat the misalignment. So we align body parts to control points on the frame machine — these are factory-specified locations that define the entire geometry. Once the foundation is restored, we hang the panels and check gaps with a feeler gauge around the entire perimeter, not by eye. The door, hood, and trunk lid should close without effort and sit flush with adjacent parts. A dedicated body technician takes the car from straightening to assembly, so one person is responsible for geometry, not a chain of workers. Based on the inspection, we prepare a written estimate and don't start work until the owner agrees.
What we do for different types of damage
Repair method and control point
Damage
Work option
What we check
Dent with intact paint
Paintless dent repair through interior access
Preservation of factory coating
Dent with a crease
Pulling, thin filler, painting
Panel flatness under light
Crack in plastic bumper
Plastic repair or bumper replacement
Mounts and fit by gaps
Through corrosion on rocker or arch
Cut out section, weld in new metal
Welds and protection of hidden cavities
Opening misalignment after impact
Straightening on frame machine to control points
Gaps with feeler gauge, door movement
Part beyond repair
Replace with OEM, aftermarket, or customer part
Fit by gaps and mounts
Painting, polishing, and final inspection
Once the metalwork is done, the coating determines the result. The owner can assess its quality themselves if they know where and in what light to look and what assembly details to check before leaving.
Color by code, booth, and drying
We match the color by the car's paint code, paint in a spray booth, and dry at temperature. The booth isn't just for show: it's dust-free and draft-free, and heating lets the coating harden evenly without runs or soft clear coat. One nuance to know in advance: the factory code is one thing, but the car fades over years in the sun. If a new part looks noticeably fresher than the adjacent ones, it's sometimes smarter to paint the neighboring panel with a smooth blend than to get a spot of a different shade. We decide this together with the owner at the estimate stage. For vans, large panels are a separate issue: we usually paint the entire Ducato side panel, otherwise the repair boundary will be noticeable. We prime bare metal in the welding area before painting to prevent corrosion under the new paint. We provide a 24-month warranty on body repair and painting.
Three stages of polishing
Abrasive paste: removes minor scratches, dust in the clear coat, and spray orange peel, leveling the surface for the final gloss.
Anti-hologram paste: removes holograms and circular marks from the first stage that are clearly visible in the sun.
Protective compound: seals the polished clear coat and lasts longer than wax, which washes off after a few car washes.
Light check: we inspect every polished part under a lamp and at an angle before handing over the car.
No quick wax: fast wax hides scratches for a day or two, then they reappear, so we finish with a protective compound.
Why three stages: if you stop at the abrasive, the gloss will be hazy, and holograms will show up in the first bright sun.
How to inspect the body at pickup
Daylight: inspect the paint outside and at an angle — that's how you see color mismatch, orange peel, and waves on the panel.
Gaps: run your finger along the seams of doors, hood, and fender — the gap should be even along the entire length.
All doors: open and close each one, including the sliding and rear doors — without effort, jerks, or unusual sounds.
Seals: check that the rubber sits evenly after assembly, otherwise a leak will show up at the first car wash or in rain.
Assembly details: check headlights, turn signals, parking sensors, and washers — they were removed with the bumper or fender.
Documents: compare the work order and acceptance act — they should list the work, timeline, and warranty terms.
Warranty and transparency from estimate to pickup
Body repair results are tested not on pickup day but over months of use. That's why we document warranty terms and repair progress on paper and in photos, so we don't argue from memory a year later.
What the 24-month warranty covers
Warranty and non-warranty cases
Situation
Warranty
What we do
A weld seam split at the repaired spot
Covered, 24 months
Free diagnostics and redo
A panel shifted, the gap drifted
Covered, geometry and fasteners
We set the panel back in place
Paint defect on the repaired panel
Covered, 24 months
We fix it based on free diagnostics
A new accident
Not covered
New repair estimate
A part brought by the client
Not covered
We check it fits before installing
Third-party interference
Not covered
We inspect and agree on an estimate
How you see the repair progress
We start with a written estimate: the repair doesn't begin until the owner approves it, even if the damage looks obvious. If we find hidden damage during disassembly, we report and agree on it first instead of presenting it as a done deal. At key stages CARGID takes photo reports, so you can see the metal before filler and the weld seams before painting. We show removed parts and hand them over to the owner, and the choice between OEM, aftermarket and their own part stays with them. The work order from intake to handover is handled by the service advisor — one person who knows the car's history. As for timing, here's the guideline: repairing a panel without waiting in line for the booth usually takes two to four days — disassembly, straightening and welding, assembly and polishing. Before handover we do a test drive, and the warranty period and terms are written into the work order and the acceptance certificate.
Geometry and prep in Fiat body repair
A Fiat body repairs predictably if you don't skip geometry and don't cut corners on prep. Below is what an owner should keep in mind before the repair and in the first months of driving.
Model: on vans the weak spot is the sliding and rear doors, on passenger cars with age it's the sills, arches and the bottom of the doors.
Signs: a stiff door, uneven gaps, water in the cabin and cracked sealant mean damage deeper than the paint.
Geometry: a panel is only installed on a restored base and the gaps are checked with a feeler gauge, otherwise the misalignment comes back.
Finish: the color is matched by code, and a sun-faded car sometimes needs the neighboring panel painted with a blend.
Van: the sliding and rear doors are adjusted only on a corrected opening, otherwise the rollers, hinges and locks wear out faster.
Documents: the warranty period and terms must be in the work order and the certificate, keep them until the term ends.
10
Frequently asked questions about Fiat body repair in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The cost depends on the type of damage, the model (Albea, Doblo, Ducato, etc.), and whether parts need replacing. Body polishing — from 19,000 ₸, paintless dent removal — from 13,000 ₸, painting one element — from 15,000 ₸ for labor, full body repaint — from 350,000 ₸. We prepare an exact estimate after body diagnostics — it costs from 5,000 ₸.
Repair time depends on the scope of work and parts availability. Removing a small dent without painting takes 1–3 hours, polishing scratches — 2–4 hours. Painting one panel — 1–2 days, repairing a part with disassembly, straightening, and painting — usually 2–4 days: time is needed to dry the primer, paint, and clear coat in the booth and for polishing. For serious damage (fender replacement, sill repair), the time increases to 7–14 days. If rare Fiat parts are needed and not in stock in Almaty, the wait can take up to 3 weeks. We always give exact timelines after diagnostics.
Yes, we provide a written warranty on all types of body work — 24 months. For the paint coating, the warranty is 24 months provided the care recommendations are followed (avoid aggressive washing in the first weeks, do not use abrasive polishes). The warranty covers paint peeling, blistering, corrosion in the repair zone (in case of through damage), as well as the quality of welds. If defects are found during the warranty period, we eliminate them free of charge. All obligations are fixed in the contract.
Yes, advance booking is mandatory, as the body shop is busy. You can book by phone or via WhatsApp, choosing a convenient time. For the initial inspection and estimate, we allocate a 20–30 minute window during the day. For the repair itself, it is better to book 2–5 days in advance, especially in season (spring-autumn) when there are many orders. If urgent repair is needed (for example, after an accident when the car is not drivable), let us know — we will try to find a slot in the coming days. In any case, call before coming so we can confirm availability.
Yes, for Fiat body repair, customer-supplied parts and materials can be used. We check their applicability to the specific model and the degree of wear before starting work. If a part does not fit in geometry or quality, the master will agree on a replacement with you. In that case, the timelines depend on the availability and condition of your parts.
During the warranty period, if defects are found (unevenness, drips, paint peeling, improper fit of parts), come to us, we will conduct a free diagnostics and fix the shortcomings. If the defect arose due to our fault, the repair will be done at our expense. If you notice problems at home during the first days (for example, a scratch appeared) — contact us immediately, do not try to fix it yourself so as not to lose the warranty. If you disagree with the master's conclusions, you have the right to conduct an independent examination — if our fault is confirmed, we will compensate the cost of the examination and redo the work. We value our reputation and always meet customers halfway.
We perform all main types of body work: local painting without filler (fixing scratches and chips), paintless dent removal (PDR), straightening and welding (fixing deformations, replacing sills and frame rails), plastic bumper soldering, headlight polishing, full or partial body painting with color matching. Fiat often needs parts that aren't in stock — we'll help you order OEM parts or aftermarket equivalents. We also restore body geometry on a straightening bench after serious accidents. Each type of work has its own technology and pricing; the exact list is determined after inspection.
In the first 3–4 weeks after painting, avoid aggressive washing, especially high pressure, and do not use abrasive polishes and waxes. Wash the car by hand with a soft sponge and neutral shampoo. It is not recommended to visit self-service car washes with active chemicals. Try not to park under direct sunlight in the first week so the paint polymerizes evenly. If there is slight orange peel on the surface, after 3–4 weeks we will polish the area free of charge — this is normal practice. Avoid bitumen and tree sap in the first weeks — remove contaminants promptly. Following these rules will ensure the durability of the coating.
Payment is made after the estimate is agreed upon and upon completion of the work. Cash and non-cash payment are available, as well as transfer to an account. The final cost of Fiat body repair depends on the extent of damage, the need to replace elements, and the complexity of painting.
Prices depend on the extent of damage and the parts you choose. Fender replacement with welding and painting — from 40,000 ₸, door replacement with painting — from 50,000 ₸, geometry restoration on the frame machine — from 80,000 ₸ for labor, parts are paid separately. For an exact quote, send photos or come in for body diagnostics — in 30–60 minutes the technician will prepare an estimate covering all labor and materials.
11
Reviews of our Fiat body repair
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Alexey
The task was to straighten the rear door on the Doblo after an unsuccessful parking. They did it in 3 days, not 2 weeks as I thought. Paint matched to color, no drips. I paid 185,000 tenge, which turned out cheaper than what we found at the dealer. The master showed photos of the process, everything is transparent. I recommend.
Marina
Fiat Punto 2012, rear arches rusted through. I was afraid everything would need replacing, but the guys cut out and welded in new inserts, painted. At first it seemed expensive — 320,000, but now it's like new, and they gave a 24-month warranty on the work. Thanks for not persuading me to get new fenders.
Timur
Albea after hitting the left fender. There was a misalignment of the pillar, I thought it was the end, I'd have to run. In 7 days they straightened it, painted it, the gap became like from the factory. I paid 450,000, but it turned out better than in other places for 700. Special thanks for the advice on insurance.
Olga
I got into an unpleasant situation: someone keyed the entire door on the Tipo. I thought only repainting would save it. At CARGID they did the door in two days, price 95,000 — stayed within a penny. Color matched perfectly, you can't even tell it was painted. They communicated politely, explained every stage.
Dmitry
On the Scudo someone rear-ended me in a parking lot, the bumper cracked. They scheduled me quickly, did it in 3 days. Disassembled, pulled the panel, no need to install a new bumper — they repaired the mounts and painted. I paid 140,000. Good that they don't push for replacing parts when you can get by without.
Aigul
Corona: a dent appeared on the front fender at four hundred, the paint was not damaged. The guys straightened it with PDR technology for 35 thousand tenge, done in one day. No paint at all, flawless. Thanks! (Car: Fiat 500, the dent was from the door).
Ivan
My Fiat Doblo after an accident looked sad: broken headlight, dent on the hood, bumper in pieces. I came here on a friend's advice. The masters not only pulled the body but also fitted the new parts perfectly. They worked almost a week, but the result is excellent. I spent about 580,000 on everything, but the car became better than before the accident.
Kristina
I drove a Fiat Punto, and someone scratched the front bumper. I thought the whole thing would need painting, but the master said it could be done locally. They did it in 1 day, very neatly. The price was 18,000 tenge, I was overjoyed. True, I had to leave the car for a day, but they gave me a replacement car. Thanks!
Sergey
Fiat Scudo, hit a pothole, bent the sill. It took two weeks, but they did everything with quality. They cut out, welded in a new sheet of metal, painted. The total was 260,000 tenge. I picked up the car, looked — everything is straight, no gaps. Additionally treated the sill with anti-corrosion. I recommend!