We will restore your Honda's body to factory geometry and paintwork. We straighten, weld, paint — from minor chips to serious accidents. We provide a 24-month warranty on all work and use premium materials.
The cost depends on the complexity of the damage and the type of paintwork. We will give you an exact price after inspection.
Service
Duration
Warranty
Price
Local painting without materials
1 day
24 mo
from 12,000 ₸
Bumper painting
1–2 days
24 mo
from 20,000 ₸
Fender painting
1–2 days
24 mo
from 25,000 ₸
Door painting
1–2 days
24 mo
from 28,000 ₸
Hood painting
2 days
24 mo
from 35,000 ₸
Roof painting
2–3 days
24 mo
from 40,000 ₸
Full body painting
7–14 days
24 mo
from 350,000 ₸
Paintless dent removal
2–4 hours
24 mo
from 6,500 ₸
Fender straightening
from 3 hours
24 mo
from 15,000 ₸
Door straightening
from 4 hours
24 mo
from 18,000 ₸
Welding and metal pulling
from 3 hours
24 mo
from 20,000 ₸
Rocker panel replacement
1–2 days
24 mo
from 40,000 ₸
Side member replacement
2–3 days
24 mo
from 60,000 ₸
Anti-corrosion treatment
1–2 days
24 mo
from 25,000 ₸
All prices are listed excluding the cost of materials. The final cost depends on the condition of the body and the materials selected. Warranty periods — see the page «Warranty»
06
Why people trust CARGID with Honda body repair
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
24MO
warranty on labor — the term is stated in the work order.
Color matched by body code
Base coat and clear coat in two passes
Dent pulling with rods
01
We paint in 2 coats
We apply the base in two passes, and the clear coat as well. A thin layer causes spots and fades quickly, so we ensure dense coverage.
02
Matching by VIN
We match the color by the body code, not by eye. Even a faded shade will match if based on the factory code.
03
Dents without putty
We straighten the metal with levers to the factory geometry. The putty remains thin, so the repair won't crack in a year.
04
24-month warranty
We cover the clear coat against clouding and peeling. If a defect appears due to our fault, we will repaint the part for free.
07
Stages of Honda body repair
Steps.
We explain how the restoration of your Honda's body goes — from inspection to delivery.
01
Inspection and estimate
You submit a request, we clarify the details and schedule a convenient time for inspection. You bring the car, the master inspects the damage, draws up an estimate and agrees on the timeline.
inspection and estimate
02
Disassembly and defect detection
We remove attached elements, assess hidden damage, and adjust the estimate if necessary. We finalize the list of works, cost, and deadlines — you sign the work order.
disassembly and fault check
03
Body works
We perform straightening, welding, dent pulling, and replace damaged parts if necessary.
panel beating, welding, pulling
04
Preparation for painting
We apply putty, primer, and sand surfaces to ensure an ideal base for enamel.
body filler, primer, sanding
05
Painting and drying
We match the paint by code, apply it in the booth, dry and polish to a factory shine.
painting by code and drying
06
Assembly and delivery
We install the parts, perform quality control, and return the car with a warranty.
We perform Honda body repair in Almaty taking into account the brand's factory paint: we select the color by body code, apply base and clear coat in two passes, and straighten dents with levers to factory geometry. We work with sedans, crossovers, and right-hand drive models, start after a written estimate, and provide a 24-month warranty.
Honda Factory Paint and Color Matching
Honda has a thin factory finish and many complex colors, from pearlescent whites to deep metallics. That's why painting here starts with color matching, not with a spray gun and a sander.
How We Match Color and Apply Layers
We match Honda color by body code, not by eye, and always verify the spray-out against the car in daylight. The code sets the factory formula, but the original paint fades over the years, especially on the hood and roof, so even an exact formula can show a noticeable difference without verification. We apply the base in two passes and the clear coat in two as well: a thin layer causes spots, shows through on edges, and fades faster in the sun. Drying takes place in the paint booth, after which the part is polished to an even gloss, without orange peel or dust. If the shade of the adjacent panel has already drifted from the factory, we suggest a blend so the boundary isn't visible. Tip: the Honda color code is usually stamped on a plate in the driver's door jamb — photograph it in advance, this will speed up material selection.
Solid Enamel, Metallic, and Pearl in Practice
factory coating types and matching complexity
Coating type
Layers when painting
What we look at
Solid enamel
Base and clear coat
Fading of adjacent parts
Metallic
Base with aluminum powder and clear coat
Shade under different angles
Pearl
Base, pearl layer, and clear coat
Number of passes of the mid layer
Dark colors
Base and clear coat
Scratches and holograms after polishing
When Polishing Is Enough
We remove scratches that haven't reached the primer by polishing without painting: we take off a thin layer of clear coat with an abrasive and bring out the gloss with a soft polish. For Honda with its thin factory finish, this is especially important — every extra repaint adds a layer and takes the part further from the original shade. A network of fine scratches from branches, car wash marks, and dulled clear coat on the hood and doors can be removed with polishing in one visit. Before work, the technician assesses the depth of damage and the remaining clear coat: if the scratch has cut through the coating to the primer or metal, polishing won't remove it, and the part needs painting. After polishing, we can apply a protective compound so the gloss lasts longer. Tip: run your fingernail across the scratch — if it catches, you most likely can't do without painting.
Weak Spots of the Honda Body
On used cars, the Honda body ages in predictable places. A neglected chip or a bubble under the paint costs noticeably more than a spot treated in time, so these areas are worth inspecting every season.
Where to Look for Chips and Rust
Front edge of the hood: gravel from the highway hits the thin coating, and chips down to the primer appear in the first years.
Roof edge and A-pillar: small chips above the glass go unnoticed for a long time, and then rust shows from under the seal.
Rear wheel arches: dirt and road salts accumulate behind the wheel well liner, and corrosion comes out as bubbles along the edge of the arch.
Rocker panels and bottom of doors: clogged drain holes hold water inside, and rust goes from inside the cavity outward.
Tailgate and trunk lid: under the license plate trim and along the seal, moisture stagnates and eats into the metal.
What We Do About Chips and Corrosion Spots
We start Honda body repair on chips and rust spots by stripping the area down to bare metal — otherwise the rust keeps growing under the new paint. A small chip with no corrosion we seal locally: sand, prime, lay down base and clear, then polish the blend area. If blisters have already spread along the edge of an arch or a rocker panel, we open up the paint wider than the visible spot: there's often a hole right through under a blister, and the scope of work changes. In that case we recalculate the estimate and get your approval before we continue. After welding, arches and rocker panels always get anti-corrosion treatment inside and out. A hood with dozens of chips is cheaper to repaint whole than to touch up each spot separately — that way the finish comes out even across the whole surface. Tip: touching up a chip with a brush without stripping doesn't stop rust, it just hides it for a season.
Sedans, crossovers and right-hand-drive Hondas
Honda models differ in panel area, door design and how easy it is to find body parts locally. That affects how much we disassemble, which parts we source, the painting area and the overall turnaround in the shop.
Honda models in the body shop
brand models and typical body work
Model
Common jobs
What we account for
Civic
Bumpers, fenders, hood chips
Complex colors and color blending
Accord
Doors, fenders, long side panels
Evenness of large panels
CR-V
Rear arches, rocker panels, tailgate
Corrosion on used cars
Pilot
Large doors and bumpers
Painting and drying area
Fit and Vezel
Parking dents, bumpers
Parts for right-hand-drive versions
Stepwgn
Sliding doors, rocker panels
Sliding door tracks
Color blending on Civic and Accord
Painting a Honda Civic in a complex pearl or metallic color almost always involves blending into the adjacent panel: pearl and metallic lay down differently on every pass, and the edge of new paint on the same plane as the factory finish shows up at an angle. When blending, we stretch the base onto part of the neighboring fender or door and clear the whole panel, so the seam isn't visible in sun or shade. On the Accord with its long side panels, blending matters even more — the eye reads a large flat surface as a whole, and any difference in shade stands out. If the color is solid and the factory paint hasn't faded, the panel can be painted without blending, which cuts down the work area. We decide after a spray-out test, and you see it in advance, not after the paint job. Tip: wash the car before the repair — the spray-out is matched against clean paint, not road film.
Straightening, welding and replacement in Honda body repair
The metalwork decides whether the repair will show a year from now. We choose the method based on the condition of the metal and what's hidden under the damage, not on saving money at the first stage.
Dents without thick body filler
For Honda body repair in Almaty with dents, we work with levers and pulling to bring the metal back to factory geometry, and leave body filler as a thin leveling layer. Thick filler is a common cause of rework: it absorbs moisture, sinks and cracks along the edge of the repair, especially on doors and fenders that vibrate constantly. If the paint over a dent is intact, we push the metal out from the back and keep the factory finish. If the clear has cracked or the dent is sharp, we straighten the panel, then sand, prime and paint. A deep dent with a crease we first pull with a spotter, then finish with a hammer and dolly. Before painting, the technician checks the surface under a lamp and by touch: waves in the metal show up even more after painting than before. Tip: if a fine crack has appeared along the edge of a panel after someone else's repair, there's almost certainly a thick layer of filler underneath.
When a rocker panel or arch gets welded and when it gets replaced
Localized spot: a small area of corrosion is cut out, new metal is welded in and the shape is restored without replacing the whole rocker panel.
Rusted-through rocker panel: if the metal has rotted along its length and from the inside, we fit a repair section or a whole rocker panel.
Arch edge: a rusty edge is replaced with a repair section, because stripping thin metal doesn't hold.
Protection after welding: the seam is stripped, primed, sealed, and the cavity gets anti-corrosion treatment from the inside.
Choosing the part: OEM, aftermarket or a part supplied by the owner is the client's call, but we don't cover a customer-supplied part under warranty.
Paperwork, turnaround and warranty on a Honda body
The clearer the work order and the paperwork, the fewer questions there are when you pick up the car. Below is how we document the scope of repair, hidden damage and warranty terms.
Estimate, inspection and photo report
We first put together a written estimate based on the inspection, then after disassembling the bolt-on parts we refine it and lock in the final list of work in the work order. Hidden damage — broken brackets, a bent bumper reinforcement, rust under trim — often only shows up once the parts are off. Anything beyond the first estimate we agree with the owner before the work, not spring it on you at pickup. We photograph the key stages: the panel before repair, after straightening and welding, and before painting. We show you the old parts and hand them over to you. Your car is received and handled by the service advisor, and before pickup we do a test drive and check the gaps. If a part for a right-hand-drive Honda has to be ordered, we confirm the timeline once the supplier confirms it. Tip: ask us to send photos of hidden damage on WhatsApp — that way decisions get made faster.
24-month warranty terms
Term: body repair, painting and anti-corrosion treatment carry a 24-month warranty, and we record the term in the work order and the acceptance report.
Painting: if the clear clouds or peels because of us, we repaint the panel free of charge.
Inspection: the inspection for a warranty case is free, come by any day from 09:00 to 20:00 with your work order.
What's not covered: a new accident, third-party interference, normal wear and a part supplied by the owner.
Practical takeaway: keep the work order and the photo report — they show which parts were repaired and how.
Paint and chips in Honda body repair
Honda bodywork needs attention to paint and to the spots where it gives up fastest. A few takeaways will help you prepare for the repair and accept the car with confidence.
Color by code and spray-out: the code on the plate sets the formula, and checking it against the body in daylight removes any mismatch.
Layers without cutting corners: two passes of base and clear coat seal the metal tightly and prevent spots on the edges.
Fix chips on time: sanding down to bare metal in the first season is cheaper than welding metal into the arch a few years later.
Metal, not filler: a dent is worked out with levers and pulling, and filler stays a thin leveling layer.
Paperwork in hand: the work order, photo report and acceptance form confirm the scope of work and the warranty.
10
Frequently asked questions about Honda body repair in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The price depends on the scope of work, the degree of damage, and the Honda make/model. For example, a local repair (pulling out a dent without painting) will cost from 6,500 tenge per panel. Painting a fender with preparation — from 25,000 tenge, a door — from 28,000 tenge. Full body painting (if required) — from 350,000 tenge. The price is also affected by the cost of materials (paint, primer, body filler) and the complexity of the color (metallic and pearl require more precise matching and cost more). We provide an accurate estimate after inspection at the service station.
The timeframes depend on complexity. Local repair of one part: 1-2 working days. Medium scope (fender + bumper + sill): 3-5 days. Major repair with replacement of several elements and body painting can take from 7 to 15 days. If rare parts need to be ordered (for example, for Honda Fit or Stepwgn), the timeframe may increase by the delivery time (usually 3-7 days). We provide exact timeframes after diagnostics.
Yes, we provide a warranty on all types of body work: 24 months on the paint coating, 24 months on welding work and body geometry. The warranty is valid subject to following care recommendations (for example, do not wash painted panels with high pressure for the first 14–20 days). If defects appear during the warranty period, such as paint peeling, corrosion at welding points, or body filler sagging, we will fix them free of charge at our service.
Yes, it's better to book in advance. The body shop is busy, especially during the season (spring-summer). To get a convenient time, call 2-3 days ahead. Urgent booking is also possible if a slot opens up due to a cancellation. When booking, you get priority and exact timeframes. For a cost estimate, you can send a photo of the damage via WhatsApp in advance — we'll give you a price guideline, but the exact estimate will be provided after inspection.
Yes, for Honda body repair you can bring your own body parts, headlights, bumpers, and paint materials. Before starting work, the master will coordinate the suitability of the parts: we install original and quality aftermarket parts, but we do not use parts with damage or mismatched catalog numbers. The cost of work in this case is calculated separately, without the cost of parts.
Bring the car to us for inspection. We will assess the condition: check the paint thickness, body geometry, and seam quality. If the defects are critical (misalignment, corrosion, paint peeling), we will offer the optimal solution: either fix the problem areas (for example, repaint the part) or perform a full repair again. The cost of corrective work depends on the scope. For example, repainting a fender — from 25,000 ₸. You will get an honest analysis and estimate, without unnecessary upselling.
Local repair is the elimination of damage in a limited area (up to 15-20 cm in diameter) without repainting the entire part. It is cheaper and faster, but not always possible if the damage is deep or the color is complex (there is a risk of shade difference). Full part painting guarantees uniform color and corrosion protection. We recommend full painting for damage affecting the stiffening rib or a large area (more than 20% of the part). Price: local — from 12,000 ₸, full — from 20,000 ₸ per element.
After Honda body repair with painting, for the first 14–20 days do not wash the body under high pressure, do not apply wax, and do not polish the painted areas. During this period, the paint coating gains its final hardness, so also avoid sudden temperature changes and parking under tree sap. During this period, wash with a soft sponge without abrasives, and apply polishing and protective compounds after the coating has fully cured.
Payment for Honda body repair is made in cash, by bank card, or by transfer to an account; payment by invoice is possible for legal entities. The final amount depends on the extent of damage, the need to replace parts, the painting area, and the complexity of body geometry. The exact cost is determined after inspecting the car and assessing the damage; before starting work, it is agreed with the client.
Yes, our service has experience working specifically with Honda: Civic, Accord, CR-V, Pilot, as well as JDM market models (Fit, Stepwgn, Vezel). We know the specifics of the body elements of these cars, the nuances of paint selection (for example, special colors like Championship White) and typical weak points (corrosion of arches, sills). This allows us to perform work more accurately and avoid mistakes. During repair, we take into account the factory assembly technology, which is especially important for maintaining body geometry.
11
What clients say about our Honda body repair
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Alexey
I got into a minor accident, dented the front fender on a Honda Fit. The guys fixed everything quickly, straightened it out, painted it — the color is indistinguishable. Paid 85,000 tenge, finished in 3 days. The car was returned clean, thanks for the work!
Dinara
I scratched the door against a pole in the parking lot. I thought I'd have to paint it, but at CARGID they did polishing and everything disappeared. Only 45,000 tenge and one day. Very happy that I didn't have to repaint the original Honda CR-V paint.
Marat
Replaced the rear bumper on Honda Accord. Did everything quickly, efficiently, matched the color. It became like factory, 120 000 tenge, 2 days. I recommend this service.
Elena
After an accident on a Honda Civic, there was a dent on the rear door. They fixed it without painting, pulled out the dent, polished it. Six months have passed, it looks like new. Price 32,000 tenge, done in a day. Excellent service!
Sultan
Had a problem with the sill on Honda CR-V — rusty. In CARGID they cut out the affected area, welded in a new one, painted. 99 000 tenge, 4 days. Everything is neat, warranty on the work. Thanks.
Natalya
The hood on the Honda HR-V was covered in chips from stones. I ordered painting, it turned out great, the color was matched perfectly, it shines like new. 76,000 tenge, 2 days. Now I'm not afraid to drive on the highway.
Viktor
I searched for a long time for a service where they could paint a Honda Pilot so that it wouldn't be noticeable. At CARGID they did an excellent job, the fender after an accident — indistinguishable. Paid 85,000, done in 3 days. I recommend.
Aigul
Көлігімнің Honda Fit алдыңғы қанатын жөндеттік. Жақсы жұмыс істеді, бояуы дәл түсті, 85 000 теңге, 3 күн. Көлікті таза күйінде қайтарды. Ризамын!
Dmitry
I rented a Honda Odyssey, broke the mirror and scratched the door. At the service, they quickly restored the door, painted it, everything matched the color. 52,000 tenge, 2 days. Thanks for adequate prices and quality.