The exhaust system operates in an aggressive environment: temperature fluctuations, moisture, chemicals. Over time, the metal burns through, holes and unusual noise appear. We repair mufflers of all makes: weld burn-throughs, replace flex pipes and resonators, eliminate leaks. We work quickly and provide a warranty of 12 months.
Price list for diagnostics, welding, and replacement of exhaust system components. The exact cost depends on the car make and the complexity of the work.
Service
Duration
Warranty
Price
Exhaust system diagnostics (inspection, leak detection)
30–40 minutes
12 mo
from 2 000 ₸
Tightening muffler clamps and connections
30 minutes
12 mo
from 1 500 ₸
Gasket replacement (flange connection)
from 1 hour
12 mo
from 2 500 ₸
Minor repair (spot welding, sealing a pinhole leak)
from 1 hour
12 mo
from 3 000 ₸
Replacement of rubber muffler hanger mounts (1 pc.)
from 30 minutes
12 mo
from 1 000 ₸
Flex pipe replacement (vibration damper)
1–2 hours
12 mo
from 7 000 ₸
Resonator repair (welding in a patch, restoration)
Manufacturing an exhaust system component according to a template
from 4 hours
12 mo
from 12 000 ₸
Complete exhaust system replacement (pipe assembly)
from 1 day
12 mo
from 25 000 ₸
Emergency muffler repair (technician dispatch within 2 hours)
from 1 hour
12 mo
from 5 000 ₸
On-site muffler repair (at the customer's location)
1–2 hours
12 mo
from 8 000 ₸
All works are performed with a warranty. Prices are for labor only and do not include the cost of parts. The exact cost will be determined by the technician after diagnostics. Warranty periods — see the page «Warranty»
06
Advantages of Muffler Repair at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
12MO
warranty on labor — the term is stated in the work order.
Oxygen sensor replacement
EGR disable
Exhaust diagnostics
01
We replace the flex pipe together with the bushings
We install a new flex pipe and hanger bushings in one go. Old bushings often tear during removal, and without replacement the muffler sags again.
02
Weld 3 mm, no thinner
We weld the joints with a semi-automatic welder with a continuous 3 mm weld. Thin welding quickly cracks from vibration, so we use exactly this weld.
03
Work takes 2–3 hours
Replacing the flex pipe with bushings or re-welding the resonator takes up to three hours. That is how long it takes for disassembly, welding and cooling of welds before checking.
04
12-month warranty
We give six months for welds and tightness of connections. If it whistles again in this place, we will re-weld and re-seal for free.
07
How We Repair Mufflers
Steps.
We explain step by step what will happen to your car at our service.
01
Inspection on the Lift
You leave a request on the website or by phone, we select a convenient time for your visit. We lift the car, inspect the entire exhaust system for damage and corrosion.
request on WhatsApp
02
Sound Diagnostics
We start the engine, listen to the exhaust, determine the exact location of the leak or rattle. We show you the problem areas, explain repair options and fix the price.
inspection and diagnostics
03
Disassembly of Components
We remove the necessary elements: mufflers, resonators or flex pipes, carefully disconnecting the joints.
estimate before work starts
04
Repair or Replacement
We weld, replace the catalytic converter, repack or replace the internals — it all depends on the diagnosis.
work to factory procedure
05
Assembly and Check
We put everything back, tighten the clamps and check the tightness of the connections.
result check
06
Final Control
We listen to the sound cold and hot, make sure the problem is gone, and hand over the car.
Car service in Almaty. We reply on WhatsApp and by phone.
2 000 ₸Exhaust system diagnostics
10 · Useful
Muffler Repair in Almaty by CARGID with a 12-Month Warranty
Author: Роман Вернерgeneral car repair technician, 13 years of experience
Published Updated
CARGID repairs mufflers in Almaty at its own facility with 6 lifts and a welding station. First, diagnostics and a written estimate; we start repairs only after you agree. We replace the flex pipe together with the mounts, weld joints with a continuous 3 mm seam, and give a 12-month warranty on the work, recorded in the work order.
Signs of Exhaust Problems and Muffler Repair with Restoration
Exhaust noise varies, and the type of sound tells you which component to check first. We explain what each symptom means and how to tell a burned-out muffler can from a worn resonator or flex pipe.
How to Tell a Burned-Out Muffler from a Faulty Resonator
A metallic hum during acceleration usually comes from the resonator, while a steady low roar at idle points to a burned-out muffler can. The resonator sits in the middle of the exhaust system and is the first to catch vibration and condensation, so a hole in it produces a ringing sound at mid-range RPMs, whereas the rear muffler burns through at the seam and rumbles deeply when the car is stationary. The flex pipe in this chain absorbs vibrations from the exhaust system, and when it tears, a rattle on takeoff adds to the roar. We start muffler repair in Almaty by listening to the exhaust both cold and after warm-up—when cold, a crack in the resonator sounds quieter, but after warm-up the metal expands and the leak becomes more pronounced. That's why we begin diagnostics in Almaty with two runs: on a cold engine and after five minutes of operation.
Exhaust Smell in the Cabin and Rattling Over Bumps
Exhaust smell in the cabin at idle indicates a leak at a joint or a burn-through in the front part of the system, while rattling over bumps points to torn hanger mounts or loose clamps. The flange gasket burns out over time, and gases escape under the hood, where the heater draws them into the cabin. The hanger mounts are rubber and crack with age: the muffler starts to wobble, knock against the body over uneven surfaces, and shift on the clamps. Loose clamps produce a similar sound but metallic, with a clanking over speed bumps. You shouldn't drive with the smell, even to the shop—exhaust gases enter the cabin through the heater, and when you stop in traffic, the concentration rises faster than you think. It's best to check joints on a lift: a crack at the flange isn't visible from above.
What Happens If You Drive with a Hole in the Muffler
The leak grows: the edge of the crack vibrates with every engine stroke, and within a couple of weeks the gap in the metal doubles.
Neighboring components suffer: vibration without damping is transmitted to the resonator and hanger mounts, and you end up replacing two parts instead of one.
Fuel consumption increases: the oxygen sensor detects air ingress and enriches the mixture, so fuel consumption goes up.
The seam cracks again: a thin weld seam can't handle vibration, so we weld with a continuous 3 mm seam.
Metal rusts faster: after winter the exhaust gets louder not from a new burn-through but from road chemicals eating away the thin metal at the weld seam.
Flex Pipe Replacement and Muffler Repair Together with Mounts
The flex pipe is a wear item that is the first to absorb engine and exhaust pipe vibration. We explain how to recognize its wear and why replacing this part separately from the hanger mounts is not cost-effective.
How to Tell the Flex Pipe Is Worn
A worn flex pipe produces a metallic hum during acceleration and vibration through the body that intensifies when pulling away. The sound appears in the 1500–2500 RPM range when exhaust flow is under load, and it's almost inaudible at idle. At the same time, a slight exhaust smell appears in the cabin—gases seep through cracks in the corrugations under the body and are drawn into the heater air intake. The flex pipe tears not along its entire length but at one or two corrugations: visually the part may look intact, so you need to check it on a lift with a flashlight, not by ear. The technician feels each corrugation, looking for metal tears and soot traces—soot shows the leak location more accurately than any sound. On Almaty roads with frequent speed bumps, the vibration damper's lifespan is shortened: constant impacts on the suspension stretch the flex pipe prematurely.
Why Flex Pipe Replacement Goes Together with Mounts
We install a new flex pipe and hanger mounts in one go because old mounts often tear during removal, and without replacement the muffler sags again. This repair always includes checking the mounts, clamps, and connections: rubber loses elasticity over the years, and when the pipe is removed, the old mount simply separates from the bracket. A sagging muffler pulls the part at an angle, and the new one wears out faster—so saving on mounts leads to a repeat visit in a few months. We use new mounts and clamps, and we show and give the old parts to the client so it's clear what was replaced. In our experience, sagging is immediately visible on a lift—by the misalignment of the pipe relative to the brackets.
How Long Does Flex Pipe Replacement with Mounts Take
Disassembly and removal: we remove the pipe, free the flex pipe from clamps and connections, and check the condition of adjacent exhaust components.
Welding: we weld in the new part with a MIG welder using a continuous 3 mm seam, install the hanger mounts, and tighten the clamps.
Cooling the seams: we let the metal cool before inspection—microcracks aren't visible on a hot seam.
Check: we start the engine, listen to the exhaust at different RPMs, then take a test drive before handover.
Timeframe: flex pipe replacement with mounts takes us up to three hours.
Warranty: we give 12 months on this work, and record the term and conditions in the work order at handover.
Weld or Replace the Exhaust Component with Muffler Repair
Repair versus replacement isn't a matter of taste but a decision based on metal condition and damage area. We show where the line is between a patch and a new section.
When Muffler Repair Still Makes Sense
Restoration is justified when the metal around the burn-through is solid and the damage area is small—then spot welding or a patch holds up for a long time. Our technicians take on minor repairs with leak sealing and resonator restoration if the body has retained its rigidity and the baffles are intact. The rear muffler is more often replaced entirely: it operates in the most aggressive zone—condensation, road chemicals, constant temperature changes. Both light vehicles and trucks come through our shop in the city, but the criterion is the same: metal thickness. Before welding, the technician taps the metal around the leak—if it yields under a finger, the patch won't last long, and it's more honest to suggest replacing the section right away. If the metal around the defect is thin, the patch won't last and will crack at the edge—then it's more cost-effective to install a new section immediately than to come back to the same spot in a month.
Why a thin weld cracks and what kind of weld we use
We weld joints with a MIG welder using a continuous 3 mm bead, because thin welds crack quickly from vibration. The exhaust system is under constant stress: the engine transmits vibrations to the pipe, the flex pipe absorbs some of them, but the joints still experience bending loads. A thin weld holds only through the contact point and comes apart after the first winter when the metal contracts in the cold. A continuous bead distributes the load along the entire length of the joint rather than at points, so a crack doesn't run from one edge to the other after the first season. We weld stainless steel components with TIG — this way the weld doesn't oxidize and doesn't rust from the inside. Before welding, the technician cleans the edges down to bare metal and sets the gap — this determines whether the bead lays flat or goes wavy.
Comparison of exhaust system repair options
repair options by component condition
Repair option
When we use it
What we check
Tightening clamps and connections
Joint loosened, whistling appeared
Connection tightness, gasket condition
Gasket replacement
Leak at the flange joint
Flange flatness, bolt torque
Minor repair (spot welding, sealing a pinhole)
Small burn-through, metal is solid
Metal thickness around the pinhole
Flex pipe replacement with mounts
Humming during acceleration, body vibration
Flex pipe folds, mount condition
Resonator repair
Local damage to the housing
Integrity of the housing and baffles
Resonator or rear muffler replacement
Metal burned through
Condition of the section and mounts
Full exhaust system replacement
Burn-through along the entire pipe
All sections and mounting points
How exhaust system repair goes and how long it takes
We show the car's path from intake to handover — what stages the component goes through, how long each job takes, and where you control the process without standing over the technician.
Diagnostics and a written estimate before work begins
First we do diagnostics on the lift and issue a written estimate, and we start work only after the client agrees. The car is received by the service advisor: he inspects the component, listens to the exhaust at idle and under load, and manages the work order all the way to handover. Exhaust system repair here always starts with this inspection so the client understands the real scope of work. The shop has six lifts, so the inspection doesn't stretch into half a day — a bay is freed up for the specific car. We can't give an exact price over the phone because it depends on the condition of the metal, access to the component, and the choice of part — that's only visible on the lift. In my opinion, a written estimate before work saves more nerves than any discount: you see the scope in advance and don't find extra lines on the invoice.
Work stages and real timelines by type
Flex pipe replacement with mounts: up to three hours — for disassembly, welding, and cooling of the welds before leak testing.
Resonator rewelding: a shift of up to three hours if the metal around the defect still holds the load.
Fabricating a component from a template: longer because the pipe is fitted on site and checked for fit on the hangers.
Full exhaust system replacement: the longest option — includes fitting the pipe assembly and checking all joints.
Minor repair and tightening clamps: we fit it into a short visit if the fasteners aren't seized solid.
Photo report, test drive, and vehicle handover
We take a photo report at key stages of the work, and before handover we do a test drive to check for leaks and absence of vibration. We reassemble in reverse order: new hangers, checking clearances to the body, checking flange connections. We show and give the old parts to the client — they show what was replaced and what condition the component was in before repair. We provide a 12-month warranty on exhaust system work; the term and conditions are recorded in the work order and the handover document. Moreover, diagnostics for a warranty case is free — if a rattle appears a month later, the follow-up inspection won't become a separate expense. This procedure removes the main fear: you pay for the result, not for finding the cause.
Warranty, your own parts, and service options
We explain exactly what the warranty covers, how it works with your own parts, and what service options are available for trucks and urgent cases.
What the 12-month warranty covers and what voids it
The warranty on muffler restoration is 12 months; the term and conditions are recorded in the work order and the completion certificate at vehicle handover. It covers the work performed and the components we installed: welds, connections, hangers, new flex pipe. It does not apply to accidents after the work, third-party interference, normal wear of consumables, or a component the client supplied. If an abnormal sound appears after the work or it leaks at a joint again, diagnostics for a warranty case is free — the technician lifts the car, finds the cause, and fixes it at no charge. In our practice, returns are more often due to mounts that no one checked on the first visit than to welding. That's why before handover every component goes through a test drive, and we show and give the old parts to the owner — you can see what was replaced.
Can you bring your own parts and what about the warranty
You can bring your own parts — the choice between OEM, aftermarket, and a client-supplied part is up to the client, but the warranty does not apply to supplied parts. The service advisor receives the car, checks the part number against our database, and before work begins tells you whether the component will fit by diameter and length. If your flex pipe doesn't fit, you find out before disassembly, not during the process: fitting a non-standard component on site sometimes takes more time than installing a new one. With OEM and aftermarket parts from trusted suppliers it's simpler — the warranty covers them along with the work, and if a problem recurs we sort it out without arguing about whose part is to blame. In my opinion, saving on a flex pipe is rarely justified: the price difference is small, and a redo takes another shift.
Trucks, urgent and mobile repair
Muffler repair for commercial vehicles: we take Gazelle, KamAZ and other commercial transport — welding the body, replacing sections, TIG for stainless steel.
Urgent call-out: we come out within 2 hours if you need the vehicle on the road today and the leak doesn't affect driving — we agree on the timing when you book.
On-site option: good for local jobs — patching a pinhole, tightening clamps and joints, replacing a gasket.
When a lift is needed: welding the body and replacing a section require lifting the vehicle, so we do those jobs at our shop on 6 lifts.
Custom fabrication from a template: if a part is discontinued, we cut a section of the exhaust system from a sample and weld it in with TIG.
What decides exhaust repair
Briefly about what determines the result of exhaust repair: the right pair of parts, an honest metal joint, a realistic timeline and clear warranty terms on the work performed.
Flex pipe with mounts: replaced in one go — old mounts tear during removal, and without replacement the muffler sags again.
3 mm welded joint: a continuous MIG weld handles vibration better than tack welds — thin metal cracks first.
Timing: replacing the flex pipe with mounts or rewelding the resonator takes up to three hours in one shift — for disassembly, welding and cooling of the joints.
12-month warranty: the terms are written into the work order, and diagnostics for a warranty case are free.
Your own parts: you can bring them, but the warranty doesn't cover the customer's part — we're only responsible for the work.
11
Frequently asked questions about muffler repair in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The cost of muffler repair at CARGID depends on the type of work and the complexity of the damage. Replacing a gasket or minor mount repair will cost from 5,000 to 10,000 tenge. Replacing part of the muffler (resonator, main canister) including the part cost — from 3,500 to 8,000 tenge. Full muffler replacement — from 25,000 tenge, including labor and materials. We give the exact price after diagnostics.
A standard muffler repair (gasket replacement, fixing a leak) takes 1–2 hours. More complex work — replacing the resonator or muffler assembly — is done in 2–4 hours. If welding or custom part fabrication is required, the time increases to 1–2 days, but usually we try to finish within the day of contact.
Yes, we provide a warranty on the work performed and the parts installed. For welding work and fixing mechanical damage — 6 months. For new mufflers and catalytic converters — 12 months. The warranty is valid provided the vehicle is operated without external impacts (accidents, driving over deep potholes, etc.). If a defect appears during the warranty period, we will fix it free of charge.
Booking is not required, but recommended. You can come any day from 9:00 to 20:00 without an appointment, but during peak hours (after 16:00) there may be a queue. To guarantee a convenient time and avoid waiting, call us and book — it takes a couple of minutes and allows us to prepare the necessary parts.
Yes, you can come with your own parts (muffler, resonator, gaskets). We accept clients with materials, but in that case we only guarantee the work, not the part. Also let us know in advance so the master knows you are bringing your own parts. If the part doesn't fit or is defective, the master will inform you before starting work.
If the muffler is noisy again after repair, first inspect the mounts and connections — the clamp may have loosened. If there are no visible problems, come to us: we will perform a free re-diagnosis within the warranty period. If the defect is our fault (poor weld, incorrect installation), we will fix the problem at our expense. If the problem is wear of another element, we will quote the cost of fixing it.
There are three options: 1) Cosmetic repair — sealing leaks, cracks, replacing gaskets and clamps; it's cheap but extends the unit's life by 3–6 months. 2) Partial replacement — installing a new resonator or canister when one of the elements has failed; gives a normal result for 1–2 years. 3) Full muffler assembly replacement — the most reliable option, suitable when several elements are damaged or corrosion is severe.
After repair, follow a few rules: for the first 100–200 km avoid hard starts and driving through deep puddles — let the seams and seals settle in. Regularly (once a month) check the mounts: tighten the clamps if they have loosened. Try not to drive off-road where the muffler might catch. Once a year it is useful to treat the welds with an anti-corrosion compound — this will extend the service life.
Payment is made after inspection and estimate approval. You can make a prepayment for ordered muffler parts, and the remainder — after completion of work. We accept cash, cards, and transfers. Repair time is usually from a few hours to two days, depending on the scope.
Burn-through is a common occurrence, especially on older cars. The possibility of repair depends on the extent of damage. If a small area has burned through (up to 10 cm), it can be welded — this will last 6–12 months. If the burn-through is extensive or the metal has thinned, it is better to replace the muffler with a new one — it is more reliable and safer. We perform diagnostics, determine the degree of wear, and offer the optimal option.
12
What clients say about our muffler repair
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Aigerim
Tucson
Came here on a friend's recommendation. My Hyundai Tucson started humming after 120 km/h. Turned out the muffler packing had burned out. The guys replaced the filling in two days, the noise disappeared. It cost 24,900 tenge, which is cheaper than replacing the unit with a new one. The car started running quieter. Thanks for the honesty: they didn't push anything extra.
Sergey
Came for diagnostics due to squeaking and rattling. At the service, they quickly found the problem – the flex pipe had fallen apart. Replaced it in a day, all neat. Price – 18,500, plus saved on the flex pipe itself. The car became quieter, vibration gone. I recommend trusting the masters, they know their stuff.
Damir
Bought a used Mitsubishi Lancer, and the exhaust was full of holes. At the service, they welded all the leaks, replaced the mounts. They worked for three days, but had to wait for parts. Total – 32,700 tenge. The sound became softer, no more gas smell in the cabin. I liked that they showed all problem areas before the repair.
Natalya
Toyota Camry
Struggled for a long time with a loud exhaust on Toyota Camry. Smelled of gasoline in the cabin. Turned out – a hole. At CARGID they quickly welded it, put a patch. Two hours of work, 14,200 tg. Cheap and cheerful. The car became like new. Thanks for the efficiency and politeness.
Yerlan
Constant shaking and humming on Nissan Qashqai. Thought I'd sell the car, but decided to check. The problem was in the muffler mounting cushions and a cracked bracket. Replaced quickly, inexpensively – 6,500 tg. Now it's quiet and calm. The guys are professionals, all business.
Dmitriy
On the highway, I heard popping in the exhaust. Stopped by this service, diagnosis – a crack in the resonator. Welded in a day, 9,800 tenge. Elsewhere they asked almost 20 thousand. Satisfied with the work, all fair. If anything – I'll be back.
Aruzhan
Very grateful to the masters for saving my Audi A6. The engine started running rough, someone said the problem was in the catalytic converter. But it turned out to be a crack in the manifold. They rewelded and ground it. Three days of work, 32,700 tenge. The car came back to life, dynamics returned. Thanks for the skill and patience.
Kairat
SUV, constant trips. Started noticing the exhaust got louder. Came in, took a look – the flex pipe on the exhaust had cracked. Replaced in two hours, all properly done. Price 18,500 tenge, including labor and part. The noise is gone, the car runs smoother. Now only here.
Marina
Sportage
Thanks for the muffler repair on my Kia Sportage. There was a hole, the car roared like a tractor. Here they quickly and efficiently welded it, replaced part of the pipe. The service cost 14,200 tenge, which completely satisfied me. I recommend the service, the masters explained everything clearly.