

Toyota Camry — door soundproofing
- Cause
- The music sounded flat, and extra noise was audible.
- Found
- Inspection showed that the doors had almost no soundproofing.
- Done
- Treatment of four doors with vibration and sound-absorbing material.

We do soundproofing so that you forget about road hum and squeaks. We use STP materials — proven by time and millions of kilometers. Warranty on work — 24 months. Price is calculated individually: depends on the car make and set of zones. Free measurement and consultation.
Body and interior treatment: from hood to wheel arches and firewall

We apply the base and film to the hood. It reduces engine noise and protects the paint from heat.

We treat the trunk lid from the inside. It removes rattling and humming from the rear.

A package for the two front doors. Quieter street noise, tighter closing, deeper acoustic sound.

A package for the two rear doors. It removes noise from the rear and improves speaker sound.

We treat the cabin floor under the carpet. It reduces road noise and vibration.

A set for all four wheel arches with wheel removal. It cuts tire and stone humming.

We remove the upholstery and treat the ceiling. Quieter rain and hail, less echo in the cabin.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
Real examples of work with photos — compare the result.
Soundproofing price list: from local zones to full soundproofing of the cabin, trunk, wheel arches, and underbody.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Vehicle diagnostics and inspection with material selection | 30–40 minutes | 24 mo | from 5 000 ₸ |
| Hood soundproofing (base + film) | 1–2 hours | 24 mo | from 15 000 ₸ |
| Trunk lid soundproofing | 1–2 hours | 24 mo | from 12 000 ₸ |
| Front door soundproofing (full package, 2 doors) | 2–3 hours | 24 mo | from 25 000 ₸ |
| Rear door soundproofing (full package, 2 doors) | 2–3 hours | 24 mo | from 22 000 ₸ |
| Cabin floor soundproofing (front seats area) | 3–4 hours | 24 mo | from 30 000 ₸ |
| Cabin floor soundproofing (full, including rear row) | 5–6 hours | 24 mo | from 55 000 ₸ |
| Trunk soundproofing (complete, without rear wheel arches) | 3–4 hours | 24 mo | from 28 000 ₸ |
| Wheel arch soundproofing (set for 4 arches, with wheel removal) | 4–5 hours | 24 mo | from 40 000 ₸ |
| Headliner soundproofing (without upholstery, with removal) | 4–5 hours | 24 mo | from 45 000 ₸ |
| Engine bulkhead soundproofing | 3–4 hours | 24 mo | from 20 000 ₸ |
| Underbody soundproofing from outside (with anti-corrosion protection) | from 1 day | 24 mo | from 120 000 ₸ |
| Cabin soundproofing "Comfort" (floor, doors, trunk, wheel arches) | 2–3 days | 24 mo | from 180 000 ₸ |
| Cabin soundproofing "Luxury" (full package, including headliner and pillars) | 3–4 days | 24 mo | from 250 000 ₸ |
| SUV or minivan soundproofing (full package, increased volume) | 3–5 days | 24 mo | from 300 000 ₸ |
| Local soundproofing (1 zone of your choice, e.g., one door) | 1–2 hours | 24 mo | from 8 000 ₸ |
| Express soundproofing (1-2 zones, same-day service) | 2–4 hours | 24 mo | from 20 000 ₸ |
| Mobile soundproofing (diagnostics and local work at the client's location, ALMATY) | from 2 hours | 24 mo | from 25 000 ₸ |
Prices are for labor with economy-class materials. Timeframes and cost depend on the vehicle model and body condition. Exact estimate — after diagnostics. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We disassemble the panels with trim removal tools, not a screwdriver. We install all new clips and fasteners — after disassembly, nothing squeaks or rattles.
Vibration-damping material does not bond to cold metal. We warm the surface and the material, then roll it with a roller — it holds in both frost and heat.
We do the hood, doors, floor, wheel arches, and ceiling in one shift. That is how long it takes for disassembly, application, reassembly, and inspection without rushing.
If the vibration-damping material comes off the metal or the sound insulation sags, we will re-glue it free of charge. We cover adhesion and layer integrity specifically.
We show every stage: from intake to vehicle handover.

You submit a request on the website or by phone — we choose a convenient time. We inspect the car, check the current soundproofing, and agree on the scope of work.
request on WhatsApp
We remove the seats, trim, shelves, and ceiling, carefully disconnecting the components.
inspection and diagnosticsWe clean the body of dust and old bitumen, degrease, and dry it.
estimate before work starts
We apply vibration-damping materials to the floor, doors, roof, and trunk.
work to factory procedureWe glue sound-absorbing mats to reduce unwanted sounds.
result check
We put all parts back in place and check the fasteners and gaps. We perform a control test drive and hand over the car with a warranty.
warranty in the work orderWalk-ins welcome. By appointment — no queue.
Detailing team. 9–18 years of experience.
Author
Body polishing specialist

Interior deep cleaning specialist

Polishing specialist

Detailing specialist

Write to WhatsApp with the make, year and what's bothering you. We'll tell you the cause, a price estimate and pick a time for your visit.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

CARGID performs car soundproofing in Almaty from a single zone to a full package in one shift. First diagnostics and a written estimate, then application with heating up to 60 °C and rolling with a roller. The 24-month warranty is recorded in the work order, and we conduct a test drive before handover.
The result depends on which zones are treated first. We explain the order that gives a noticeable difference in the cabin with minimal work.
We start with the doors and wheel arches — they give the most audible result in the first kilometers, followed by the floor and firewall in terms of effect. Treating the front doors eliminates wind noise and trim vibration, soundproofing the wheel arches reduces tire noise, and treating the floor and firewall adds low frequencies from the engine and road. In our workshop over 12 years, more than 9,000 cars have passed through, and we've seen dozens of zone layouts; the order almost always starts from the sources that are constantly heard. If the budget is limited, door panels and wheel wells cover most of the city noise, while the underbody and firewall add on the highway — so we select the sequence based on the owner's routes.
Soundproofing the car doors removes trim rattling and noise from neighboring cars, and also makes the stock audio sound denser and cleaner. Treating the front and rear doors is based on vibration isolation of the metal plus noise-absorbing mats on top — two layers damp both panel resonance and airborne noise. The door is a resonating chamber, and without a vibration layer the speaker pushes air through thin metal; after application, the bass stops 'floating' at medium volume. Our technicians remove the trim with trim removal tools and install new clips so that after reassembly nothing squeaks or rattles on bumps. If audio is a priority, start with the front doors — that's where the speakers and the main air volume are, while the rear doors add to the overall cabin background and remove echo from reflections.
Wheel wells damp tire and road noise, the underbody — low-frequency hum and vibration, so for highway driving the wells come first, and for city — the floor and doors. Arch treatment is installed as a set for 4 arches with wheels removed, and at 90–110 km/h the difference in tire noise is immediately audible. Tire noise enters the cabin through the wells almost without loss, while the hum from the underbody accumulates gradually — the nature of the route usually makes it clear which zone to cover first. For those who mostly drive in the city with frequent stops, floor treatment gives more: vibration from bumps and junctions disappears from underfoot. For Almaty residents with regular out-of-town trips, it's more beneficial to start with the wheel wells.
Peeling vibration material is the most common complaint about soundproofing. The cause is almost always surface preparation and heating, not the material itself.
Vibration material peels off when it's applied to cold or dusty metal — the adhesive layer doesn't set, and with temperature changes the coating starts to bubble. Inside the door or on the arch, the surface is covered with factory anti-corrosion coating, dust, and condensation: without degreasing, the adhesive bonds to the film of contaminants, not to the metal. The second factor is residual air under the material: if it's not expelled with a roller, it expands when heated and lifts the edges. The third is skimping on seam preparation, when joints are not sealed with sealant and moisture gets in. In Almaty's climate, body metal heats up in summer and cools to below zero in winter, so adhesion is tested on temperature swings, not in ideal workshop conditions. That's why car soundproofing in Almaty requires special attention to surface preparation and material heating.
We heat the metal and material with an industrial heat gun up to 60 °C — on a cold surface the adhesive doesn't flow into the microrelief, and the layer doesn't hold firmly. Such heating softens the bitumen base of the vibration material and makes the adhesive layer fluid: it fills the pores and scratches of the metal instead of just lying on top. We heat both sides — both the body and the roll itself, otherwise the cold material takes heat from the surface on contact. After heating, we go over each piece with a roller from the center to the edges to expel air — it's the rolling, not the thickness of the vibration material, that determines whether the layer will peel off in a year or not. A thick piece without rolling holds worse than a thin one rolled over the entire area.
The work proceeds in stages from intake to test drive. We explain what happens to the car in the workshop and why the full package fits into one shift.
We do a full soundproofing job — hood, doors, floor, wheel arches, and roof — in one shift: that's how long it takes to disassemble, apply the material, reassemble, and check everything without rushing. Technicians with 9–18 years of experience cover different areas in parallel, so the full job doesn't stretch over several days like it does when one person does it. We take on a single-zone treatment or an urgent 1–2 zones the same day if the car arrives at opening — otherwise disassembly and application move to the next day. Arriving by appointment at our shop on Mukagali Makataeva, 129 means no waiting in line: the service advisor manages the work order from intake to handover and doesn't switch between cars. Book ahead for a morning slot if you want to pick up the car the same evening — the day shift ends at 20:00.
The photo report covers the key stages — the condition of surfaces before application, the layers laid by zone, and the reassembled interior — so the client can see the result of the work. We take pictures during disassembly, while applying material, and after reassembly: they show whether the firewall is covered, whether the wheel arches were treated with the wheels removed, and whether vibration damping material was laid on the floor under the front seats. This report answers the owner's main question — whether any zone they're paying for was missed. The photo report makes it easy to compare the zones in the estimate with the actual work: if the estimate included the firewall, the photos will show it's covered, not skipped. We hand over the photo report along with the completion certificate when you pick up the car — keep it, it will come in handy for a warranty claim.
We select the package based on the type of car and driving style. Below is what each format includes and how they differ in scope of work.
| Format | What's included | Who it's for |
|---|---|---|
| Local | One zone of your choice | To test the effect on one zone |
| Comfort | Floor, doors, trunk, wheel arches | City and highway, sedans and hatchbacks |
| Lux | Full package, including roof and pillars | Maximum quiet in the cabin |
| For SUVs | Full package, increased volume | Crossovers, SUVs, minivans |
Yes, we also work with client materials — but then the warranty on adhesion and integrity of layers doesn't apply, only the warranty on installation quality remains. Most often people bring vibration damping and sound-absorbing mats from well-known brands — we install the same ones ourselves, so we'll help you choose and tell you how many sheets you'll need for the doors or floor. If you bring your own materials, get them with a margin in area and a couple of spare sheets for trimming: if you run out of one, buying exactly the same may not be possible — batches differ in thickness and adhesive layer. Running short of one sheet for a wheel arch is the most common reason work stops mid-shift. Before disassembling the interior, check the number of sheets against the estimate — that way it's easier to avoid downtime. Soundproofing a car with your own materials requires that the sheets match the thickness and adhesive layer of those already installed.
For an electric car and hybrid, this treatment is even more useful — without engine noise, you hear tires, wheel arches, and oncoming airflow more clearly. Soundproofing the wheel arches reduces road and tire noise, while sound-absorbing mats on the floor and doors remove the hum that in a gasoline car was masked by the engine. The added weight from vibration and sound-absorbing layers on the interior usually doesn't noticeably affect consumption — it gets quieter right away, and the range changes within the margin of error. On a hybrid, consider two modes: on electric power you hear the same tires and wheel arches, and when the internal combustion engine starts, vibration from the firewall is added — it makes sense to include its treatment in the same visit. On an electric car, check the roof and pillars separately: there are fewer extraneous sounds, and noise from above travels further through the cabin.
Soundproofing quality doesn't show up right away but after months of use. We explain what to look for at handover, what obligations we give for the work, and what to do if a previous shop disappointed you.
The warranty on soundproofing is 24 months, it covers the work performed and installed parts, and the term and conditions are recorded in the work order and the certificate at handover. Diagnosis for a warranty case is free: if a layer has come off or a squeak appears, the technician inspects the zone, checks adhesion at the edges of the sheet, and records the cause in the work order — this allows immediately separating a warranty defect from mechanical damage and avoids wasting time on a dispute. Exceptions are standard — an accident after repair, third-party interference, natural wear of consumables, and a part brought by the client. That's why we check reassembly separately and install new clips: reusing fasteners often causes squeaks that are then hard to attribute to warranty. Before signing the certificate, ask to include the list of treated zones: that record makes it easier to prove later which areas were part of the work and which were not.
We accept the car for diagnosis, show where the layer has come off or was applied with gaps, and redo the zones according to a written estimate — we show the old parts and give them to the client. First, inspection: the technician removes the trim with trim tools, checks adhesion at the edges and center of the sheet, and sees whether the metal was heated before application. Then — an estimate with a list of zones and materials, and we start repairs only after approval. If a layer applied without heating is removed carefully, the metal underneath usually remains intact. The service advisor manages the work order through handover, and we take a photo report at key stages — you can see the replacement and application of the new layer. Using the photo report, you compare the list of zones from the estimate with the actual work and see which areas were redone and which were left as is. We hand over this report along with the certificate when you pick up the car.
Soundproofing gives predictable results when the order of work, material adhesion, and final inspection are set up as a system. Below is a short summary for booking service and picking up the car.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost depends on the level of soundproofing (partial, comfort, or premium), the make and model of the car, and the number of zones treated. On average, soundproofing of doors will cost from 25,000 to 45,000 tenge for all four doors. Full soundproofing (floor, roof, doors, trunk, wheel arches) for a C-class sedan usually costs from 250,000 tenge. For crossovers and SUVs, the price may be higher due to the larger area. We prepare an accurate estimate after inspecting the car.
The time depends on the scope of work and the type of car. Partial soundproofing (for example, only the doors) takes 4-6 hours. Full soundproofing of a sedan or crossover usually takes 2-3 working days. This is due to the need to disassemble the interior, carefully prepare the surfaces, lay materials in several layers (vibration damper, sound insulation, absorbing layer), and then reassemble. We always inform you of the exact time after diagnostics so you can plan your time.
Yes, we provide a warranty on all types of soundproofing work — 24 months. The warranty covers the quality of material installation (peeling, swelling, bulging) and the preservation of factory fasteners and clips. If any defects occur during the warranty period, we eliminate them free of charge. Important: the warranty is valid subject to compliance with the care recommendations that we provide after the work.
Yes, soundproofing is performed in a bay and takes from several hours to two days depending on the scope: full treatment of the interior, doors, wheel arches, and trunk requires more time than local treatment. Booking allows you to reserve a lift and materials for a specific model. When booking, specify the treatment zones and the desired level — this affects the time.
Yes, you can bring your own materials if they are suitable for automotive soundproofing (for example, popular brands StP, NoiseBlock, Comfort Mat, etc.). We will perform the work with your materials, but in this case, the warranty covers only the quality of the work itself, not the characteristics of the materials. If you don't have materials, we use proven ones with good acoustic properties and provide a warranty on them.
Of course, we often fix poor-quality work from other services. First, we conduct diagnostics: we assess which materials were used, how correctly they were laid, and whether there are any peelings or unstuck areas. If the materials are still in good condition, we can add the missing layers. If the materials are bad, we remove them and do everything again. The cost of rework depends on the scope and complexity. After completion, you receive a 24-month warranty.
Economy is basic treatment of only the doors and trunk using one layer of vibration damper (cost from 25,000 tenge). Comfort includes treatment of the floor, roof, doors, trunk, and wheel arches; vibration insulation, sound insulation, and an absorbing layer are used (from 250,000 tenge). Premium is maximum soundproofing of all surfaces, including the engine shield and wheel arches, using high-class materials (from 250,000 tenge). The difference is in the final level of quiet: Premium reduces noise by 70-80%, Comfort by 50-60%, Economy only removes rattling.
During the first 24 hours after installation, it is not recommended to wash the car or subject it to strong vibration (for example, driving off-road). Also avoid prolonged standing in the sun on the first day. After that, there are no restrictions — the materials are securely fixed. During operation, make sure that moisture does not get into the interior (for example, from leaks), as this can affect the properties of the materials. If you notice squeaks or extraneous sounds, contact us — they may be related to incorrect assembly, and we will eliminate them free of charge.
Payment is accepted in cash, by bank card, and by bank transfer. The cost depends on the treatment area, the class of materials, and the need to dismantle the interior. We agree on the final amount after inspecting the car and clarifying the soundproofing zones.
Most often, clients start with the doors — this is the most noticeable effect when closing doors and while driving. Soundproofing of wheel arches is also popular to reduce tire noise. Exact prices are in the price list on this page.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
Had soundproofing of the floor and doors done on a Toyota Camry. The result is noticeable: it became noticeably quieter on the highway, and the music started sounding different. The price was 95,000 tenge, and it was done in one day. Honest service, without pushing unnecessary extras.
Had soundproofing of the trunk and wheel arches done on a Kia Sportage. The hum from the rear always annoyed me. Now it's quiet, even on a dirt road it's calm. Very satisfied, the craftsmen know their trade. It cost 110,000 tenge, and it was done in one day.
Ordered full soundproofing for a Lexus LX 570, it was done in 4 days, everything was precise. Now it's quiet in the cabin, like in an expensive car. It cost 385,000 tenge, but the quality is top-notch. I recommend it!
I went to CARGID for soundproofing of the doors on a Honda CR-V. I wanted to improve the sound of the audio system. The guys advised treating the doors and, at the same time, the wheel arches. It became not only quieter, but the music effect is better too. The price was 120,000, and they worked carefully.
I had soundproofing done for the kids, Mazda CX-5 ceiling. Both in rain and wind, outside noises decreased. The service quality is very good, it was finished in one day. I paid 85,000 tenge, I'm happy.
Had comprehensive soundproofing done on a Volkswagen Polo. The car became much more comfortable, the road is not heard. The work took two days, the cost was 150,000 tenge. The craftsmen explained everything and showed the materials. I recommend it.
Soundproofing for a Toyota RAV4, did the floor, doors, ceiling. The result is excellent, silence in the cabin. The price is 280,000, the term is 3 days. Everything is neat, no smell. Thank you!
Ordered soundproofing for a Kia Morning, wanted to install more powerful music. Did vibration and noise absorption of the doors and trunk. The radio now sounds great, no extraneous rattling. Paid 80,000 tenge, satisfied.
Thank you for the soundproofing of the ceiling and trunk on a Hyundai Tucson. Before it felt like driving in a drum, now it's quiet and comfortable. It was done in a day, the price is 130,000. Very attentive guys, they explained everything in detail.
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.