Reupholstering car seat covers means restoring the interior's freshness and comfort without buying a new car. At CARGID, we carefully remove old covers, repair seat frames, and install new upholstery made from quality materials. We work with fabric, faux leather, Alcantara — we select material to match your style and guarantee the result for 12 months.
We will neatly reupholster the covers according to your patterns or adjust the existing ones — exactly on time.
Service
Duration
Warranty
Price
Consultation and inspection of the covers, assessment of the scope of work
30 minutes
12 mo
Free
Removal and installation of covers from one seat
1–2 hours
12 mo
from 5 000 ₸
Minor repair of the cover (split seam, loop, Velcro)
1 hour
12 mo
from 3 000 ₸
Replacement of the zipper on the cover (up to 60 cm)
1–2 hours
12 mo
from 4 500 ₸
Reinforcement of seams on the cover (along the perimeter)
2–3 hours
12 mo
from 6 000 ₸
Adjustment of the cover in place (shrinkage, hemming, fixation)
2–4 hours
12 mo
from 8 000 ₸
Reupholstery of the headrest (with removal and installation)
1–2 hours
12 mo
from 4 000 ₸
Reupholstery of the armrest (with removal)
1–2 hours
12 mo
from 5 000 ₸
Reupholster covers on one seat (with removal and installation)
from 4 hours
12 mo
from 15 000 ₸
Reupholster covers on a row of seats (2-3 places)
1–2 days
12 mo
from 35 000 ₸
Reupholster covers on the entire interior (passenger car)
2–3 days
12 mo
from 80 000 ₸
Reupholster covers on the entire interior (SUV/minivan)
3–5 days
12 mo
from 120 000 ₸
Reupholster covers with design changes (pockets, heating, marking)
extra 1–2 days
12 mo
from 10 000 ₸
Urgent reupholstery of covers (within 24 hours)
1 day
12 mo
+50% to the price
Master's visit to home/office (inspection or work)
by arrangement
12 mo
from 5 000 ₸
The exact cost depends on the material, complexity of the cut and condition of the covers. Master's visit within Almaty — from 5 000 ₸. Warranty periods — see the page «Warranty»
06
Why people choose cover re-stitching at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
12MO
warranty on labor — the term is stated in the work order.
Preserving functions
Working with airbags
12-month warranty
01
Double stitching, not single
We stitch every seam with two parallel lines using 40/3 thread. A single one breaks under tension, a double one holds its shape for years.
02
We replace the zipper in 2 hours
We install a hidden zipper in one pass on an industrial machine. The lock moves freely, the cover comes off without tearing the fabric at the seam.
03
We re-stitch the interior in 4 days
Full re-stitching with seat disassembly, foam replacement and reinforcements under the frame. Longer — because each cover dries after steaming before installation.
04
12-month warranty on seams
If the stitching came apart or the zipper broke due to our fault — we re-stitch for free. The client's fabric is not included, only labor and thread.
07
How we re-stitch covers
Steps.
From request to finished interior — a clear process without surprises.
01
Inspection and measurement
You leave a request on the website or call, we clarify the details and book you for a convenient time. You bring the car to the service, the master inspects the current covers or upholstery, takes measurements and clarifies your wishes.
request on WhatsApp
02
Material selection
We offer samples of eco-leather, Alcantara, fabric — we help you choose according to your budget and the style of your car.
inspection and diagnostics
03
Taking patterns
If the covers are sewn from scratch, we take precise patterns from your seats so that the fit is perfect.
estimate before work starts
04
Cutting and sewing
We cut the material and sew the covers on professional equipment, with seam reinforcement.
work to factory procedure
05
Installation and fitting
The covers are installed on the seats, the master adjusts and fixes them without wrinkles or distortions.
result check
06
Vehicle handover
We check the seams, fastenings, access to seat belts and headrests — everything should be convenient and safe. You accept the work, check the quality and pay if prepayment was not provided.
Car service in Almaty. We reply on WhatsApp and by phone.
5 000 ₸Removal and installation of covers from…
10 · Useful
Reupholstering car seat covers in Almaty with a 12-month warranty
Author: Аружан А.detailing specialist (mobile), 11 years of experience
Published Updated
At CARGID we reupholster car seat covers in Almaty with double stitching using 40/3 thread and a 12-month warranty on the work. A full interior takes 4 days, a zipper replacement takes 2 hours. First an inspection and a written estimate, we start work only after the client agrees.
What reupholstering car seat covers is and how it differs from reupholstery and ready-made covers
There are three different things at play on seats: removable covers, upholstery under the frame and padding. They differ in what exactly is replaced, how it is attached and how deeply the seat needs to be disassembled.
How reupholstering covers differs from reupholstering upholstery
Reupholstering covers: working with an existing removable cover, which is removed, unpicked, worn areas are replaced and it is sewn again on an industrial machine.
Reupholstering upholstery: replacing the seat's covering itself, stretched over the frame and held by staples and adhesive over the padding.
Disassembly: when reupholstering covers, the cover is removed entirely; when reupholstering upholstery, the upholstery is dismantled from the frame and the padding is often replaced.
What stays original: after reupholstering covers, the frame, foam and fasteners are left untouched if they are intact; after reupholstering upholstery, the old upholstery is discarded.
When reupholstering covers is chosen: the cover is intact but a seam has come apart, the zipper is broken or the fabric is worn on the side.
Practical tip: if the cover is held by a zipper and the fabric is not torn, start with reupholstering the cover — there is less disassembly than with full reupholstery.
When you need seat covers sewn from scratch
Sewing from scratch is needed when there are no old covers or they cannot be restored, and we take patterns directly from the seats. The technician measures the cushions, backrests and headrests, transfers the contours to the material and cuts for the specific model, not an average size. We sew on an industrial machine, running two parallel stitches along every seam. We install the finished covers, steam them and dry them — only after that does the fabric settle into shape and the wrinkles go away. New covers made to patterns sit without wrinkles only after steaming and drying, so we always include a day for fitting in the timeline — otherwise the cover will sag at the bend of the backrest within a week.
Can covers be reupholstered without removing the seats
We do minor repairs and zipper replacement without removing the seat, but full reupholstering requires disassembly on a workbench. We replace a zipper in 2 hours right in the car: we install a concealed zipper on an industrial machine in one pass, the slider moves freely, and the cover comes off without tearing the fabric at the seam. Tightening a seam or stitching a split section can also be done on site. Full reupholstering with disassembly, foam replacement and reinforcements under the frame is different — the seats are removed and assembled on a workbench, not in the car. Removing the seat is worth it when you need to replace the foam or reinforcements under the frame: sagging padding cannot be restored without disassembly, and new fabric on a sagging base will immediately ripple.
What car seat cover reupholstery work we do and when a repair is enough
The range of work goes from reupholstering a headrest to a full interior reupholstery with structural changes. The table below helps you choose what is needed in a specific case and where a targeted intervention ends.
Work options and what they include
types of work and the reason for each
Work
What we do
When it is needed
Headrest reupholstery
new headrest cover
wear or tear on top
Armrest reupholstery
replacing the armrest covering
wear in the elbow area
Reupholstering one seat
new cover for one seat
wear on the driver's seat
Full interior reupholstery
full set with disassembly
general upholstery wear
Structural changes
pockets, heating, markings
new options needed
Minor repair
local darning and stitching
small tear
Zipper replacement
concealed zipper in one pass
zipper has come apart
Seam reinforcement
double stitching on problem seams
seam has started to come apart
Zipper replacement on a cover in 2 hours
We replace a zipper on a cover in 2 hours — we install a concealed zipper in one pass on an industrial machine. The slider moves freely, the cover comes off without tearing the fabric at the seam, and you don't have to sew it back on. We use 40/3 thread, the same as on the main seams, so the fastener doesn't pull the fabric and doesn't come apart under tension. The work is pinpoint: we don't disassemble the seat, we only remove the upholstery. Most often people ask to replace the fastener on the driver's seat — it comes apart first due to constant getting in and out. The concealed version holds its shape for years, not months like a regular set-in one. Before replacement, we check the condition of the fabric at the seam: if it has thinned, we apply reinforcing tape, otherwise the new fastener will tear the material at the first tension.
When repair is enough, not a full reupholster
If the fabric is intact and only the seam or zipper has come apart, we offer a targeted fix, not a new cover. Minor repair means local darning and stitching, reinforcing seams with a double stitch on problem areas. This option preserves the original seat material and avoids disassembly. But it doesn't save from wear: if the upholstery is scuffed all over, reupholstering is more cost-effective. We look at the condition of the foam under the upholstery — if it has sagged, darning will only restore the look, not the seat's shape. Targeted work is justified when there is one defect and it's local. If there are two or more defects — consider a full reupholster. Before work, the technician shows which areas need replacement and explains why local darning won't give the desired result in a specific case. This approach saves the client money: you don't pay for a full reupholster when a targeted fix is enough.
Why the seam matters more than the material when you decide to reupholster car seat covers
Expensive eco-leather or Alcantara won't hold up if the stitching is single. We explain why a double seam with 40/3 thread outlasts the upholstery and how we achieve a smooth fit without wrinkles.
Double stitching with 40/3 thread instead of single
We sew every joint with two parallel lines of 40/3 thread — a single one breaks under tension, a double one holds its shape for years. Reinforced thread of this thickness is chosen for dense upholstery: on eco-leather and Alcantara it doesn't cut through the fabric and doesn't shrink after steaming. We work on an industrial machine with tension adjustment for each type of material — parameters differ for thin fabric and dense leather. Two lines distribute the load, so when you sit in the seat the joint doesn't stretch to one point and doesn't come apart. In our experience, single stitching is the first cause of upholstery coming apart on the side bolster after a few months of daily use. You can check the quality by touch: run your finger along the joint — two parallel lines should run evenly, without gaps or puckered areas.
Why the cover fits with wrinkles and how we fix it
Taking patterns: we measure the seat along its contour, not from the old upholstery — worn fabric gives incorrect dimensions.
Cutting according to patterns: we cut parts with allowance for stitching and fit, otherwise waves appear on curves.
Steam treatment: we steam each part so the fabric shrinks before installation, not on the seat.
Drying before installation: we let the blank dry after steaming — wet fabric stretches and shrinks unevenly.
On-site fitting: after installation, we check the fit and adjust tension at the joints.
Re-steaming: we eliminate any remaining wrinkle by steam treatment, not by re-cutting.
What materials we use for covers
Eco-leather: dense fabric for daily use, easy to clean and holds color.
Alcantara: soft to the touch, suitable for premium interiors and comfortable seating.
Fabric: basic option with good ventilation for the hot season.
Client's raw materials: we accept for sewing, payment only for labor.
How reupholstering car seat covers goes and why it takes 4 days
The path from booking an inspection to handing over the car consists of several stages, each with its own timeframe. Drying after steaming is not a formality but a full part of the timeline that cannot be shortened without losing the fit.
Inspection, estimate, and booking
Reception: the car is received by the service advisor, who manages the work order until handover, so one person is responsible for the entire cycle.
Inspection: on the lift, we check the condition of upholstery, seams, zippers, and seat filler, recording defects for each element.
Written estimate: we list works and materials line by line, and start repair only with the client's consent.
Scope fixation: during inspection, we determine what exactly to replace — upholstery, foam, or zipper — so no extra items appear in the estimate.
Booking: we agree on the date of visit; by appointment we accept without queue during working hours from 09:00 to 20:00.
Work stages and timeframes by type
timeframes and scope of work for each type of reupholster
Work
Timeframe
What's included
Zipper replacement
2 hours
concealed zipper, checking slider movement
Headrest reupholster
1 day
taking patterns, sewing, installation
Reupholster one seat
1-2 days
disassembly, sewing, fitting
Full interior reupholster
4 days
seat disassembly, foam replacement, drying after steaming
Why replace foam and how to tell it has sagged
We replace foam during a full reupholster if the padding has sagged and the seat has lost its shape — a new cover on collapsed filler will fit with wrinkles and stretch unevenly. Sagging is felt as a dip under the thigh and uneven seat fit: we check this during inspection before cutting, while the fabric is not yet cut. Under the frame, we install reinforcements so the soft layer doesn't get pressed through in areas of constant load. If you decide to reupholster car seat covers in Almaty, during inspection we will show you the condition of the padding in advance and explain where replacement is needed. In our experience, complaints about a "crooked cover" after someone else's repair are often related not to the seam but to worn-out padding that no one replaced. If the filler is intact, we only renew the upholstery and don't add unnecessary parts to the cost. The check takes a couple of minutes and saves a whole redo — for both the client and us.
What you can change in the cover when reupholstering car seat covers
Reupholstering allows not only replacing the material but also adding options. We explain what changes we actually perform, how they affect timeframes, and what remains under warranty.
Pockets, heating, and new layout
When we change the design, we add pockets, heating and new stitching layout — that's a separate service on top of the standard cover. Backrest pockets are cut to the seat patterns of the specific model so they don't bunch up or get in the way of folding. We lay the heating under the layer of eco-leather with pre-run wiring and a separate connector, and we transfer the stitching layout from the approved sketch — parallel lines, diamond or piping along the edge. A design change adds time: new elements are cut and sewn separately rather than built into the finished piece. A pair of pockets adds a day to the job, heating adds another. Before ordering, approve the layout sketch on paper to scale — the pattern reads differently on the seat than on a sheet.
Airbags and seat belt access after reupholstering
Side airbag: we sew the deployment zone with a weakened seam — the fabric splits along the line instead of tearing wherever it happens to.
Seat belts: after installation we check that the webbing runs freely in the guide and the buckle comes out of the slot without catching.
Headrests: we reupholster and refit them so the height lock engages without sticking.
Seat fasteners: we check bolt torque after assembly — access to them opens up when the cover comes off.
Test drive: before handover we take a drive and make sure the belts don't snag and the headrest doesn't press.
Cover reupholstering for taxis and commercial vehicles
Material: heavy-duty eco-leather, denser than standard — handles daily getting in and out without creasing on the side bolster.
Seams: double stitching with 40/3 thread on the problem areas — the side bolster, the seat cushion and the edge of the backrest.
Reinforcement: we add an extra layer of fabric under the frame so the cover doesn't rub through against it.
Removability: a hidden zipper that lets you take the cover off for washing without tearing at the seam.
Timeline: we put together a full set for a taxi in 4 days, same as a regular interior — the reinforcement doesn't stretch the job out.
Warranty, customer materials and care for reupholstered covers
The warranty on reupholstering is 12 months for the work and the thread. Here's what it covers, what falls outside it, and how caring for reupholstered covers affects keeping the warranty valid.
What the 12-month warranty covers and what it doesn't
Term and documents: we give a 12-month warranty on cover reupholstering, and the terms are written into the work order and the handover report when you pick up the car.
Work and thread: we're responsible for seam quality, cover fit and the integrity of the 40/3 thread stitching for the whole term.
Customer's own fabric: if the customer brought the material, we don't answer for its wear — only for the seam and the fit.
Consumables: natural wear of the foam and upholstery isn't covered by the warranty.
Third parties: trimming it yourself, reupholstering elsewhere or an accident after the work voids our obligations.
Warranty inspection: we examine a disputed case free of charge and state the cause — a defect or normal use.
Customer's own materials and paying only for the work
You can bring your own fabric or eco-leather — we accept customer material and charge only for the work, with no markup on the raw material. This option is chosen by those who need a specific shade or texture to match the interior. Before cutting, we check the material for stretch and thickness: thin material under a double seam can ripple, and that shows even before sewing. If the material won't hold its shape, we tell you honestly up front — redoing a finished cover costs more than choosing another material. Our service advisor records in the work order that the fabric is the customer's and separately states what we're responsible for. Medium-density eco-leather behaves more consistently under a double seam than thin textiles — the seam lies flat on it. Before cutting, ask the technician to show you a test stitched patch on your material: that way you can see how it will behave on the seat. We do this kind of car cover reupholstering with customer material with the same care as with our own.
Caring for eco-leather and Alcantara without voiding the warranty
Eco-leather: wipe with a soft cloth and a neutral product, no alcohol or abrasives.
Alcantara: clean with a soft brush without hard rubbing so you don't raise the nap.
Stains: remove with an upholstery stain remover, not solvent or bleach.
Sun: park in the shade so the upholstery doesn't fade or dry out.
Leather conditioner: apply sparingly, excess collects dust in the seam.
Warranty: improper use is a common reason for denial, so ask the technician what to clean the specific material with.
Seat cover reupholstery: seams, timing and warranty
Here's the key stuff to keep in mind before booking the job: from the difference in technologies to timelines and warranty terms on the seams.
Technology: reupholstering works with the existing cover rather than replacing the upholstery or fitting removable covers — that's a different process with a different result.
Seam: double stitching with 40/3 thread holds its shape for years, so when choosing a shop, ask specifically about it, not just about the material.
Timelines: doing the whole interior takes 4 days because each cover is dried after steaming, and replacing a zipper takes 2 hours.
Warranty: 12 months covers the work and the thread, but not customer material or natural wear — the terms are recorded in the work order.
Options: pockets, heating and a new layout can be added with this job, but each element adds to the car's handover time.
11
Frequently asked questions about car seat cover reupholstery in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The cost depends on several key factors. First, the complexity of the pattern and the car model: for domestic cars, reupholstery will be cheaper than for foreign cars with complex seat geometry. Third, the volume of work matters: full reupholstery of all seats and headrests or only the front ones. In our service, the minimum order for reupholstering one seat is from 15,000 tenge, a standard package for the entire interior of a mid-size sedan is from 80,000 tenge. We quote the exact price after inspecting the car and choosing the material. Exact prices are in the price list on this page.
The standard time for reupholstering a full interior (5 seats) is 3–5 working days. If only the front seats are required, we finish in 1–2 days. The time is affected by the workshop's workload and the complexity of the work: non-standard patterns, additional elements (perforation, stitching, embroidery) increase the time by 1–2 days. We always state the exact deadlines when accepting the order and notify you if there are delays. An urgent order (for example, reupholstering one seat within 24 hours) is possible for an additional fee — plus 30% to the cost.
Yes, we provide a 12-month warranty on all completed interior reupholstery work. The warranty covers the quality of seams, hardware and the absence of material defects. If during the warranty period seam discrepancies, material peeling or other manufacturing defects are found, we will fix them free of charge. The warranty does not apply to mechanical damage, exposure to chemicals or improper care, so we give clients detailed operating recommendations.
Yes, booking is required, as our workshop is usually booked 2–3 weeks in advance. You can book by phone or through the website by choosing a convenient time. When booking, we fix a preliminary cost, and the final price is quoted after inspecting the car. If you need it urgently, mention it when booking — we might find a slot in the coming days. We also recommend coming for diagnostics in advance (1–2 days before the planned work) to choose the material and agree on all details.
Yes, you can use your own material: leather, eco-leather, Alcantara, or fabric. In this case, we charge only for the work (of the tailor and upholsterer) — from 80,000 tenge for a full interior. However, we must first assess the quality and thickness of the material: too thin or loose fabric may not be suitable for upholstery and may tear quickly. If the material is of poor quality, we will warn you and recommend choosing from our materials. Also note that the warranty does not apply to client-supplied material — we are only responsible for the quality of sewing.
If you find defects after receiving the car (crooked seams, wrinkles, poor material tension, non-working folding mechanisms), contact us immediately within 3 days. We will fix the shortcomings free of charge, usually on the day you come in (complex repairs take up to 3 working days). In case of a dispute, we will conduct an independent examination (if necessary, you can invite your own expert). If the defect is confirmed, we will redo the work at our own expense. If the problem arose due to improper use, you can order a repair for an additional fee.
Reupholstery is a complete replacement of the factory seat upholstery: we remove the old one, make new covers according to an individual pattern, and install them. This is the highest-quality option that provides a perfect fit and factory look. Re-sewing is when we change only certain parts of the cover (for example, side support) or refresh the existing ones. We recommend full reupholstery if you want to change the color, material, or if your original upholstery is worn out. Exact prices are in the price list on this page.
Care depends on the material. For eco-leather and leather: regularly wipe with a damp soft cloth, use special leather conditioners once every 2-3 months, avoid direct sunlight (use tinting), and do not allow prolonged heating to prevent the material from cracking. For Alcantara and fabric: clean with a vacuum cleaner with a soft brush, use upholstery stain removers, do not rub hard. In any case, do not use aggressive chemicals or abrasive products. If you have any specific requirements, we will give personal recommendations after reupholstery.
Payment is made after agreeing on the scope of work and materials: we accept cash, bank cards, and transfers to the account. For regular clients, payment by invoice is possible. The exact amount is stated by the craftsman after inspecting the interior and choosing the fabric, as the price depends on the number of elements, type of material, and complexity of patterns.
Inspecting the car is mandatory for an accurate calculation of cost and time. During the inspection, the craftsman will assess the condition of the seats, their design (for example, the presence of airbags), take measurements, and discuss the desired material and color with you. This eliminates unpleasant surprises during the work. You will also be able to look at material samples right in the workshop and choose the texture. At the same time, we will check for hidden damage that may require additional frame repair. The inspection takes 15–20 minutes, and afterwards you will receive an exact estimate and the start date of work.
12
What clients say about our seat cover sewing
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Dmitry
Sportage
I had the seat covers on a Kia Sportage reupholstered; I was tired of the grey fabric. I chose black perforated eco-leather. They did it in two days, everything very neat, seams straight, fits like original. The price of 190,000 tenge is reasonable.
Aigerim
Just wow! I ordered pink Alcantara for a Mercedes, but was afraid it would look gaudy. The craftsmen advised adding black leather inserts — it turned out very stylish. Now I enjoy the interior. Thank you!
Sergey
I thought for a long time whether to get covers or reupholstery. I bought the car for a taxi and needed to refresh the interior quickly. They reupholstered it in a day and installed dense fabric. It's fine, budget-friendly at 120,000, and the car was transformed.
Aibek
Toyota Camry
I took a Toyota Camry, the old covers looked unattractive. They did a full reupholstery in eco-leather. Top-class work: got a ready answer, everything perfect. I recommend to everyone.
Olga
I had the seat covers on a Lada Vesta reupholstered; the factory upholstery deteriorated quickly. I chose fabric with foam rubber — now it's soft and beautiful. They did it quickly, in one day, price 140,000. Very pleased.
Talgat
Kia Rio
I noticed scuffs on the seats of a Kia Rio and decided to reupholster the covers. I chose eco-leather. They sewed and installed them perfectly, even the cushions didn't slip. They completed it in 2 days for 170k. Top quality.
Elena
Solaris
I ordered covers for a Hyundai Solaris, wanted to change the color. I chose grey Alcantara — it looks more expensive than it actually is. They worked neatly and packed it in film. I was satisfied.
Viktor
I reupholstered the seats in a Nissan X-Trail. The interior had regular fabric, but the kids left stains. They made eco-leather, stains are no longer a problem. The work is superb, seams straight, fastenings in place. Thanks to the craftsmen!
Asem
Our child's Lada Granta had old covers, I decided: we'll reupholster them. Kids are many, fabric wears out quickly. They sewed from eco-leather, now it's easy to clean. I'm satisfied with the service, the price was 155,000 tenge.