

Honda Fit: worn down to zero
- Cause
- Grinding noise when braking, pads worn down to metal.
- Found
- Front axle brake pads worn 100%, discs have shallow grooves.
- Done
- Front pad replacement, disc resurfacing, guide lubrication.

We replace brake pads on Honda Accord, CR-V, Fit, Civic, Pilot and other models. We use original parts and quality aftermarket. Work takes 1-2 hours, we provide warranty of 6 months on all work.
What's included in Honda brake pad replacement: front, rear, with parking brake and without.

We remove the caliper, replace the pads, clean and lubricate the guide pins. We check disc wear and fluid level.

We replace the rear pads, service the caliper and guide pins. We check the parking brake operation.

We replace the pads with an electronic parking brake, run diagnostics and clear errors. We check the actuator operation.

We replace the front and rear pads in a single visit. We service all calipers and check the brake system.

We replace a pair of brake discs, clean the hubs and install new pads. We check runout and braking evenness.

We replace the brake hoses, bleed the system and check for leaks. The pedal becomes firm and reliable.

We drain the old fluid, fill in new fluid and bleed the circuits. We remove air and moisture from the system.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
How braking distance and handling change — based on real repair cases.
The price is for labor only and does not include parts. The exact price will be quoted by the technician after diagnostics.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Front Pad Replacement (standard, without electronic parking brake) | 1–2 hours | 6 mo | from 12,000 ₸ |
| Rear Pad Replacement (without electronic parking brake) | 1–2 hours | 6 mo | from 14,000 ₸ |
| Pad Replacement with Electronic Parking Brake (with diagnostics) | 1.5–2.5 hours | 6 mo | from 18,000 ₸ |
| Front Pad Replacement with Disc Replacement | 2–3 hours | 6 mo | from 16,000 ₸ |
| Rear Pad Replacement with Disc Replacement | 2–3 hours | 6 mo | from 18,000 ₸ |
| Brake Pad Replacement (all four wheels) | 2–4 hours | 6 mo | from 25,000 ₸ |
| Brake Disc Replacement (pair) | 1–2 hours | 6 mo | from 15,000 ₸ |
| Brake Hose Replacement | 1–2 hours | 6 mo | from 8,000 ₸ |
| Brake Fluid Replacement | 1–2 hours | 6 mo | from 7,000 ₸ |
| Caliper Guide Lubrication | 30 min | 6 mo | from 3,000 ₸ |
| Brake System Diagnostics | 30–60 min | 6 mo | from 2,000 ₸ |
| Parking Brake Replacement (shoes) – drum type | 2–3 hours | 6 mo | from 12,000 ₸ |
| Parking Brake Cable Replacement | 1–2 hours | 6 mo | from 10,000 ₸ |
| Brake Pad Wear Sensor Replacement | 30–60 min | 6 mo | from 5,000 ₸ |
| Brake Bleeding | 1–2 hours | 6 mo | from 5,000 ₸ |
| Brake Disc Machining | 1–2 hours | 6 mo | from 8,000 ₸ |
| ABS Sensor Replacement | 1–2 hours | 6 mo | from 12,000 ₸ |
For parts prices, please inquire separately — we will select original and aftermarket options to fit your budget. All work comes with a warranty of 6 months. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We remove the caliper, clean and lubricate the guide pins, and push the piston in with a retractor tool, not a clamp. We replace them in 40 minutes — the brake does not pull to the side.
We install brake hoses as a pair per axle and bleed with DOT4 fluid. One new and one old hose give different force and pull during braking.
After assembly we bleed the circuit and check the pedal under pressure. We remove all air completely — otherwise the pedal is soft and the braking distance is longer.
The 6-month warranty covers the assembly, bleeding and adjustment that we performed. Parts and their wear are not included — they are chosen by the owner.
We explain step by step what happens to your car from request to pickup.

You leave a request or call — we find a convenient time, confirm the model and mileage. We lift the car on the hoist, check the condition of the pads, discs, calipers and the entire brake system.
request on WhatsApp
We show photos and give a reasoned explanation of what needs to be replaced, and fix the cost and timeline.
inspection and diagnosticsWe select original Honda pads or quality aftermarket equivalents — always in stock or on order.
estimate before work starts
We carefully remove the wheel, unscrew the caliper, extract the old pads and check the mechanisms.
work to factory procedureWe install the new pads, clean the caliper and guide pins, lubricate and reassemble the assembly.
result check
We bleed the brakes, check the fluid level and system operation on the test stand. We process the documents, provide a warranty on the work and parts, and show the replaced components.
warranty in the work orderWalk-ins welcome. By appointment — no queue.
CARGID car repair team. 8–17 years of experience.
Author
Mobile auto electrician

Car alarm and car stereo installer

Auto electrician

Roadside assistance technician

Diagnostic technician

Engine mechanic (cylinder head repair)

Auto electrician and diagnostician

Write to WhatsApp with the make, year and what's bothering you. We'll tell you the cause, a price estimate and pick a time for your visit.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

CARGID replaces Honda brake pads in Almaty after diagnostics and a written estimate: front pads in 40 minutes, with an electronic parking brake — through a dealer scanner. We lubricate the guide pins, bleed the DOT4 circuit, and check the pedal under pressure. A 6-month warranty is written into the work order, and we show you the old parts and give them back.
Friction linings wear gradually, and a Honda owner learns about the problem by sound or pedal feel. Let's break down which signs really point to replacement and which point to a seized guide pin or a worn disc.
During diagnostics, the first thing we check is the caliper guide pins: if the boot is torn and the grease has washed out, the pad on one side wears twice as fast. The reason is a seized pin that prevents the bracket from moving freely away from the disc — the lining rubs constantly, even when the driver isn't braking. On a Honda with over 100 thousand km, this is more common than the lining itself being worn to the limit. The second factor is a clogged boot channel: road chemicals and water get inside, the grease turns to paste and stops working. A seized guide pin doesn't always need replacing — more often it's enough to clean the groove, install a new boot, and lubricate with high-temperature grease. If you're getting Honda brake pads replaced in Almaty, we first fix the cause of uneven wear; otherwise the new pad will wear just as fast, and you'll be back within a few months.
Honda has three different brake work scenarios — front axle, rear axle, and the electronic parking brake variant. The set of operations and the labor time depend on the scenario you choose. Below is a table of options and a separate note on the electric drive.
| Work option | What we replace | When it's needed | What we check additionally |
|---|---|---|---|
| Front axle | Front pads | Squealing, front wear | Disc thickness, guide pins |
| Rear axle | Rear pads | Rear wear, parking brake | Guide pins, parking brake cables |
| With electronic parking brake | Rear pair and drive | CR-V, Pilot, Accord Hybrid | Drive via scanner |
| All four | Both pairs | Both at the limit | Discs, hoses, fluid |
| Together with discs | Pads and discs as a pair | Lip or disc wear | Disc thickness, runout |
On the sixth-generation sedan with a mechanical parking brake, we replace Honda Accord rear brake pads without a scanner, but on the CR-V, Pilot, and the hybrid version with an electric drive, we first retract the piston with a dealer scanner — otherwise the parking brake mechanism can be damaged. Replacing Honda Accord rear brake pads with an electronic parking brake requires connecting the device, so we schedule extra time for this work. The cable on the sixth-generation car is removed manually, while on versions with a button, the electric motor brings the lining to the disc, and without a command from the device the piston won't move. We have dealer scanners for 40+ brands, so we do the retraction and adaptation on site. After assembly, the device is needed again — to reset the adaptation, otherwise the parking brake won't clamp the disc and will show an error on the panel. On such versions, allow more time than for a regular rear pair: part of it goes to working with the scanner.
Replacing brake linings isn't just taking off and putting on a part. Let's break down what the work includes, whether the circuit needs bleeding, and checking pedal travel under pressure after assembly.
Our brake pad replacement includes removing the caliper, cleaning and lubricating the guide pins, pressing the piston in with a tool, installing the pads, and checking the pedal — while disc resurfacing, fluid and hose replacement are separate line items in the estimate. We clean the caliper guide pins with a brush and lubricate them with special paste: without this, the lining sticks and wears faster on one side. We press the piston in with a proper tool, not a C-clamp — a C-clamp distorts the boot and tears its edge. Honda brake pad replacement per the service schedule takes less than an hour if the caliper and guide pins are in good shape. According to company facts, the car is received by the service advisor and he manages the work order through to handover, so all work items are recorded in one document. That's exactly why a written estimate before repair is needed — the client sees where Honda brake pad replacement ends and related work begins, and approves each item separately.
After reassembly, we bleed the circuit with DOT4 fluid and check pedal travel under pressure: if air remains in the system, the pedal goes soft and stopping distance gets longer. Air gets into the line when the caliper is removed and the piston is pushed in — even a microscopic amount causes a noticeable drop. We bleed in sequence from the farthest wheel to the nearest, then hold the pedal under force and watch whether it sinks to the floor within a minute. We replace DOT4 brake fluid if it has darkened or contains more than 3% moisture — the hygroscopic compound pulls water from the air and boils under hard braking. New pads bed in to the rotor over the first 200–300 km — during this period it's best to avoid hard braking from high speed, otherwise the friction material picks up an uneven wear pattern and starts to squeal.
Verbal promises mean nothing, so we put the timeframe and terms in writing — in the work order and the completion certificate. Here's what the 6-month warranty covers and how long the job takes.
We give 6 months on brake pad replacement and record that term in the work order and the completion certificate when the car is handed over, and warranty diagnostics are free. If a squeal or vibration shows up after the job, the service advisor inspects the assembly first and writes down the cause in the document. The warranty covers the work performed and the parts installed — both OEM and aftermarket, and even pads the customer brought themselves. On the brake system we stand behind it for six months: that's enough time to see whether the pads seated evenly, whether the caliper is sticking, and whether fluid has leaked from the circuit. But there are exceptions — an accident after the repair, third-party tampering, normal wear of consumables, and a part brought by the customer are not covered. Better to know these terms upfront so there are no surprises when you come back.
Front pads take us 40 minutes, rear pads take longer since we check the guide pins and parking brake, and we take photos at key stages of the repair and do a test drive before handover. The car is received by the service advisor: he writes up the work order and sees it through to handover, so all questions during the job go through one person instead of a rotating shift of staff. First comes diagnostics and a written estimate — we start the repair only after the customer agrees, so you see the scope and time before the car goes on the lift. We show you the old parts and give them back — a worn pad shows whether it wore evenly or at an angle, and that tells us whether to check the guide pins at the next service.
Some owners bring their own pads, others ask us to source an aftermarket set instead of OEM. Here's how that works with the warranty and what to do with new brake components in the first few kilometers.
We work with OEM, aftermarket, or customer-supplied parts — the customer chooses, but the 6-month warranty covers the work performed and the parts we install, and it does not cover a part you bring yourself. In practice it works like this: we're responsible for the quality of installation and correct caliper assembly, while the supplier is responsible for the friction compound and the geometry of the part. That's why we note in the work order whose pads were installed, and we put the same condition in the certificate at handover. If you bring your own, check the part number against your Honda's model and year in advance — universal parts made to fit "any Civic" often squeal because of a different compound. Our advisor checks the part number against the catalog at drop-off so we don't waste lift time on the wrong set.
We've gathered in one place the key points that determine the outcome of a Honda brake pad replacement: from checking the guide pins to the warranty terms that are put in writing.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost of brake pad replacement on Honda at our auto service depends on the model and engine type, as well as whether the pads are changed only on one axle or both. The base price for one axle is from 5,000 to 8,000 tenge. If replacement is required on both axles, the cost is usually lower due to a discount — from 25,000 tenge. The price includes removing the wheels, dismounting the calipers, replacing the pads, lubricating the guides, and installing the wheels with torque. The exact cost can be quoted after inspecting the car.
Replacing front brake pads on Honda takes on average 40-60 minutes, rear — 50-70 minutes, as rear calipers often require pressing the piston with a special tool (especially on models with an electronic parking brake). If pads on both axles are replaced, the total time will be about 1.5-2 hours. The time may increase if additional problems are found, for example, corroded guides or worn discs, which we always warn about before starting work.
Yes, for all brake pad replacement work we provide a warranty of 6 months or 20,000 km, whichever comes first. The warranty covers the quality of the performed work: correct installation, absence of squeaks and vibrations, proper operation of calipers. If during the warranty period problems arise specifically related to our work, we will fix them free of charge. The warranty does not cover the pads themselves — they are covered by the manufacturer's warranty.
Booking is advisable: pads on Honda are replaced depending on the model and axles — front faster, rear with electronic parking brake longer. If the required pads are in stock, the work is done within a day, usually from one to two hours per axle. If the pads are not in stock, the time depends on delivery for the specific model.
Yes, you can install brake pads that you purchased yourself. In this case, you pay only for the work and additional materials (grease, cleaner) if required. However, we recommend using pads that are suitable specifically for your Honda model, considering the year of manufacture and type of brake system. If you doubt compatibility, our masters will check the pads for free before installation and if necessary advise which option is better. Please note that the warranty also applies to work with your parts.
If after replacing brake pads you notice a squeak, whistle, or vibration when braking, this may be due to several reasons: incorrect installation, lack of lubrication on guides, worn brake discs, or low-quality pads. At our service, we always check the condition of the discs and, if they are worn, recommend resurfacing or replacement. If the problem occurs during the warranty period, we will perform diagnostics and fix the issue free of charge. In most cases, the squeak disappears after the pads break in (200-300 km), but if it intensifies — contact us.
We don't have a strict division into economy, standard, and premium, but you can choose different options for performing work depending on your wishes. The basic option is pad replacement with caliper cleaning and guide lubrication. The extended option additionally includes checking brake discs, resurfacing if necessary, replacing brake fluid, and bleeding the brakes. The premium option implies using original parts and full brake system maintenance with computer ABS diagnostics. The cost of each option is calculated individually, we recommend clarifying details when booking.
After replacing brake pads, it is important to follow several rules. For the first 200-300 km, try to avoid sudden braking and prolonged loads on the brakes so the pads bed in to the discs. Avoid frequent braking at high speeds, especially on country roads. Regularly check the brake fluid level — after replacing pads it may drop slightly. It is also recommended to perform a check after about 1000 km: make sure the pads are not wearing unevenly and no extraneous sounds appear. Following these recommendations, the pads will last the manufacturer's stated period.
Payment is accepted in cash and by transfer; the final amount depends on the Honda model, number of axles, and chosen pads — original or aftermarket. During replacement, the master inspects the discs and calipers and if necessary informs about additional work before performing it. The cost is agreed in advance.
If you purchase brake pads at our auto service, we provide a warranty on both parts and work. The warranty on the pads themselves depends on the manufacturer and is usually 6-12 months. On work — 12 months or 20,000 km. This means that if during this period the pads fail due to a manufacturing defect or installation error, we will replace them free of charge and perform the work again. It is necessary to comply with operating conditions: do not allow overheating of brakes, use only recommended brake fluids, and service the brake system on time.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
I had the pads replaced on my Honda Fit. For a long time I couldn't find a proper service where they don't rip you off. At CARGID everything is fair: they showed me the old pads and explained why the discs needed resurfacing. It was done in a day, price 42500 tenge. The car brakes more smoothly now, no squeaks. Very pleased, will recommend to friends.
The squeal when braking on my CR-V was incredibly annoying. I came in, and it turned out the calipers were sticking. The guys rebuilt the calipers, replaced the rear pads, lubricated everything. Total 58900 tenge, took a little over a day. Now the brakes are like new. Thanks for the work and patience, they answered all questions.
The vibration when braking on my Accord was terrible, I thought the repair would cost a fortune. At CARGID diagnostics showed the discs were warped. They replaced the discs and pads, did everything in a day. I paid 97300 tenge, but now the braking is precise, the steering wheel doesn't shake. The guys are great, explained what was what.
There was a knocking in the suspension while driving my Pilot, I thought the problem was in the springs. It turned out the pads were worn and the caliper was loose. They replaced the pads and guides, lubricated everything. Price 51800 tenge, done in a day. The car now drives quietly and brakes excellently. Thanks for the honest approach.
I had the pads changed elsewhere, and a squeak appeared immediately. I brought my Civic to CARGID. It turned out the anti-squeal plates weren't installed. They quickly fixed it, put in proper ones, and applied grease. They charged 26700 tenge, which is cheaper than what I paid for the failed replacement. Now it's quiet, thanks for the integrity!
The handbrake didn't hold on my HR-V, it would roll even on a slight hill. At the service they did diagnostics, turned out the rear pads were shot, the handbrake mechanism was corroded. They replaced the pads, cleaned and adjusted the cable. Price 44000 tenge, all done in a day. Now it holds even on a steep slope. Excellent service, recommend.
The car is a Honda Stream, I had pads put on for winter, but doubted the quality. They replaced the front pads, and checked the brake fluid as well. Everything was precise, they showed the wear and explained. I paid 38000 tenge, quickly, in a few hours. Now the brakes are predictable, thanks for the consultation and care.
Honda Legend, when replacing pads at another service they stripped the thread in the caliper. I came here, the guys quickly fixed the problem, installed new pads, repaired the caliper. Satisfied with the work, price 67000 tenge. You can feel the masters know their trade, they gave a guarantee. Now only to you.
Honda Accord. There were jerks when braking, it hit when pressing the brake. At the service they said the pads were worn out, when checking the discs they found a problem. Replaced the pads, fixed everything. It came to 85000 tenge. The car drives, the brakes work, everything is fine. Thank you!
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.