

Fender Replacement
- Cause
- Impact on the left fender while parking.
- Found
- Fender deformed, crack in the wheel arch area.
- Done
- Replaced the fender, matched the paint, painted in the booth.

We'll restore your Mitsubishi's body to factory geometry and appearance. Panel beating, welding, painting — from local repairs to full restoration. We provide a 24-month warranty on all types of work.
Body work on Mitsubishi: from local painting to welding and parts replacement

We paint only the damaged area with color matching. The client gets an invisible blend and preservation of the factory coating nearby.

We remove, prepare and paint the bumper with shade matching. The client gets an even coating with no traces of repair and no color transition.

We prepare the fender surface and apply paint with a smooth transition. The client gets a restored appearance of the part and protection of the metal from corrosion.

We paint the door with preparation and color matching. The client gets a uniform shade with no spots or sags over the entire surface.

We straighten dents on a single body element without replacing the part. The client gets restored geometry and a surface prepared for painting.

We remove the damaged fender and install a new one with gap adjustment. The client gets an even part ready for painting and further use.

We cut out the damaged sill and weld in a new element with seam treatment. The client gets restored body rigidity and corrosion protection.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
Below are real examples of work with before and after photos.
We will determine the exact cost during a free inspection, where we will document all work.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Local painting (excluding materials) | 1–2 hours | 24 mo | from 12 000 ₸ |
| Bumper painting | from 1 day | 24 mo | from 20 000 ₸ |
| Fender painting | from 1 day | 24 mo | from 25 000 ₸ |
| Door painting | from 1 day | 24 mo | from 25 000 ₸ |
| Straightening of 1 element (up to 0.5 h) | 1–2 hours | 24 mo | from 15 000 ₸ |
| Straightening of 1 element (complex) | 3–5 hours | 24 mo | from 25 000 ₸ |
| Fender replacement | from 1 day | 24 mo | from 30 000 ₸ |
| Rocker panel replacement | from 1 day | 24 mo | from 40 000 ₸ |
| Body welding | from 2 hours | 24 mo | from 5 000 ₸ |
| Anti-corrosion treatment (1 zone) | 2–3 hours | 24 mo | from 25 000 ₸ |
| Underbody anti-corrosion | from 1 day | 24 mo | from 70 000 ₸ |
| Body geometry restoration | from 3 days | 24 mo | from 90 000 ₸ |
| Polishing after painting | 1–2 hours | 24 mo | from 8 000 ₸ |
| Paintless dent removal (1 dent) | 1–2 hours | 24 mo | from 10 500 ₸ |
| Raptor coating (entire body) | from 4 days | 24 mo | from 120 000 ₸ |
Prices are indicated excluding the cost of materials. The exact cost depends on the vehicle's condition and the selected paint type. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We paint according to the scheme: primer, base color, clear coat. We dry each layer separately, so the color does not shift and there is no orange peel along the edge.
One day for panel beating and preparation, one day for painting and drying, one day for assembly. We do not drag it out, but we also do not hand over a wet part.
We weld the sill and wheel arches with a continuous seam with cleaning and anti-corrosion treatment. We do not mask a hole with filler — it will not swell after winter.
We cover painting and panel beating: if the clear coat becomes cloudy, a blister appears or the primer lifts — we will repaint at our own expense.
We organize the process so that you understand every stage and can control the timelines.

You submit a request on the website or by phone, we clarify the damage and book a convenient time. The service advisor and the technician inspect the car, record all damage and agree on a preliminary estimate.
inspection and preliminary estimate
After an accurate calculation of the cost of work and parts, we agree on the estimate and timelines with you. We order original or high-quality aftermarket body parts and paint materials.
OEM or aftermarketWe remove the damaged elements, straighten the geometry, pull out dents and prepare the surface.
geometry and dent correction
We apply primer, paint and clear coat in the paint booth, achieving an exact shade match.
paint booth and color matchingWe install the parts back in place, polish the transitions and eliminate defects.
blending and polishing
We hand over the car after quality control and provide a warranty on the work and materials.
quality control and warrantyWalk-ins welcome. By appointment — no queue.

Send a photo of the damage, the car make and year to WhatsApp. We will give you a price range, the timeframe and help you pick a booking time.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

We start Mitsubishi body repair in Almaty with an inspection on the lift and a written estimate. We weld sills and arches with a continuous seam and anti-corrosion treatment, remove dents without damaging the paint using paintless dent removal, and paint parts in three layers with drying between each. We provide a 24-month warranty on painting and dent repair.
Pajero, Outlander and L200 often drive on dirt roads and winter roads with road salt, so their metal ages from below and along the edges, not in visible places.
We start Mitsubishi body repair in Almaty with an inspection on the lift and a written estimate. The car is raised, the technician taps the sills, checks the arches under the wheel arch liners, the underbody and mounting points, and notes old welding marks and thick body filler. It's better to open bubbled paint right away: underneath there is often a hole bigger than it looks from the outside, and an estimate without this step will definitely grow in the middle of the job. We photograph the found areas and show them to the owner so it's clear where each estimate item came from. We start repairs only after approval, and the service advisor manages the order until handover. A dedicated technician handles the body, welding, straightening and preparing metal for painting every day. If the inspection shows that replacing the sill entirely is more cost-effective than welding, we'll say so right away and outline both options with timelines.
A rotten sill can be covered quickly and cheaply, or fixed for the long term. The difference between these approaches becomes obvious after just one winter with road salt.
We weld rocker panels and wheel arches with a continuous seam, then clean it up and apply rust protection — we don't hide holes with filler. A patch tack-welded over rusty metal lasts until the first frost: a gap stays between the sheets, moisture gets in, and corrosion keeps going under the new paint. Filler over a hole is even worse — it soaks up water and bubbles up along with the paint. So we cut out the rotten section down to healthy metal, fit the insert butt-joint and weld the seam all the way through. Then we clean the seam, prime it and cover it with rust protection on the outside and inside the cavity. Only after that does the part go to painting. It takes longer than a quick patch, but the rocker doesn't have to be redone after a season, and the arch edge stays straight.
| Condition of the metal | What we do | What we check |
|---|---|---|
| Orange spots, paint intact around them | Clean, prime, touch up | Whether there's a spot under the paint nearby |
| Bubbled paint on the rocker | Open it up, clean down to bare metal | Corrosion depth and sheet thickness |
| A hole through the metal in one spot | Cut out, weld in a butt-joint insert | Continuous seam and cavity rust protection |
| Rocker rotted along its whole length | Replace the rocker entirely | Geometry of the opening and door gaps |
| Arch edge rotting | Weld in a repair arch | A straight edge line |
After welding, the metal inside the rocker and arch is left without factory protection, so one coat of paint on the outside isn't enough. We clean the seam, prime it and cover it with rust protection not only outside but also inside the cavity, where a brush can't reach from outside. This matters especially for body-on-frame L200 and Pajero Sport, which often drive through water and mud: moisture stays in a closed cavity for a long time and eats the fresh seam first. After the work we clear the drain holes so water runs off instead of standing inside. We also recoat the underbody in the repair area if the old coating was removed during welding. That way the repair is protected on both sides, and you don't have to open up the rocker again after winter.
After welding and straightening, the metal is unprotected. How the primer, base and clear coat go on determines how long the repaired part lasts without spots and rust.
Our Mitsubishi painting follows the primer, color base, clear coat scheme, and we dry each coat separately. The primer seals the metal and levels out fine sanding marks. The base gives the color, and the clear coat protects it from sun, road chemicals and small stones. If you lay the coats one after another without drying, solvent from the lower coat escapes through the upper one, orange peel shows up along the edge of the part, and the color fades within a month. We paint in a spray booth, dust-free. We match the color to the specific car: on a sun-faded Pajero, a new part in the factory code can come out brighter than the neighboring panels, so we compare the shade against the body. When needed, we blend into the adjacent panel so the boundary doesn't show in the light.
The timeline is made up of clear stages, and trying to squeeze any of them results in defects that then take longer to fix than the repair itself did.
| Stage | What happens | Time |
|---|---|---|
| Inspection and estimate | Lift, photos, work approval | Same day you come in |
| Straightening and prep | Pulling, welding, filler, primer | About a day |
| Painting and drying | Base and clear coat in the booth, drying the coats | About a day |
| Assembly and check | Installing parts, polishing blends | About a day |
| Paintless dent removal | Straightening without filler or paint | Usually one day |
Mitsubishi body repair after hail often needs no painting if the paint over the dents is intact. We pull the metal from the back side, and the factory finish stays in place: no filler, no primer and no shade difference with the neighboring panels. Most often this means working on the roof and hood, where hail hits hardest. If there are many dents, the technician first marks them under bright light so none of the small ones are missed. There's one limitation: if the clear coat has cracked or a dent has a sharp crease, painting can't be avoided, and we note those spots separately in the estimate. We don't hand over the car until the part is completely dry: fresh clear coat is easy to damage on the road, and then the work has to be redone. The service advisor gives the timeline for each panel when the estimate is approved and warns you if something beyond the plan turns up on the part.
The reliability of a repair isn't decided by the technician's hands alone. The part chosen and the warranty terms written down honestly — which the owner gets in hand — matter just as much.
The owner decides which part to install: OEM, aftermarket or their own part. An OEM fender or rocker fits the gaps more easily. An aftermarket part often needs fitting on site, and we factor that time into the estimate in advance. You can bring your own part, for example from a salvage yard, but before installation the technician will check it for rust along the edges, old filler and geometry. It's important to know the limits: a part brought by the client isn't covered by the warranty — the CARGID warranty covers the work and the parts we install. We show the removed parts and hand them back to the owner, and we record the replacement in a photo report. Before handover, the technician takes a test drive and checks for any new squeaks in the repair area. If a part needs to be ordered, we give the delivery time in advance and put it in the estimate, so the car doesn't sit disassembled without warning.
An SUV's body ages from the bottom and along the edges, and reliable repair there starts with an honest inspection. Here's what to keep in mind before you hand over the car.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost of Mitsubishi body repair in Almaty at our service depends on the extent of damage, the make and model of the car, and the chosen repair technology. The price is also affected by the need for straightening, filling, paint matching, and the complexity of disassembly. We prepare an exact estimate after a free inspection at the service. Exact prices are in the price list on this page.
The time depends on the complexity of the work. Local repair of minor damage (a dent without painting) usually takes 1 day. Repair with painting of a panel — 2-3 days. If replacement of several parts, straightening, and painting with blending are required — from 5 to 7 working days. Often the time is limited by the delivery of spare parts: for popular models (L200, Outlander, Pajero) parts are in stock in Almaty, for rare ones — the wait can take up to 2 weeks. We give exact timeframes after diagnostics.
We provide a 24-month warranty on all types of body work. The warranty covers paint quality (peeling, blisters, cracks), the tightness of welded seams, and the absence of corrosion in repair areas. If a defect occurs during the warranty period due to our mistake, we will fix it free of charge. The warranty does not apply to mechanical damage after repair or violation of operating rules. The warranty period and terms are recorded in the work order.
Yes, an appointment is advisable, especially if you plan repairs in the coming days. An appointment allows us to order the necessary spare parts in advance and prepare the bay so you don't have to wait. You can make an appointment by phone or via WhatsApp. On the day of the appointment, you arrive, we conduct a free inspection, draw up an estimate, and if you are satisfied, we start work. If it's urgent, call — we will try to find a slot within 1-2 days.
Yes, for Mitsubishi body repair we accept both original parts and high-quality analogues brought by the client. The cost of work is calculated separately, and the price depends on the extent of damage and the complexity of fitting parts to the body geometry. Before starting repairs, the master will coordinate the list of parts and materials with you.
If you are dissatisfied with the result of repairs at another service, come to us for diagnostics. We will free of charge assess the quality of the performed work and draw up a conclusion about the defects. Depending on the problem, we can offer a fix: eliminating paint defects, re-straightening, replacing poor-quality parts. The cost will depend on the scope of work. For example, repainting a panel will cost from 40 000 tenge. Remember that the previous service's warranty may no longer be valid, so it's better to contact a trusted place.
Local repair involves eliminating damage in a limited area: leveling a dent, matching paint, and spot painting with blending. This method is faster and cheaper — from 12 000 tenge, but is suitable only for small chips, scratches, and dents without damage to the paintwork. Full painting of a panel is performed when the damage is large, there is deep corrosion, or complex geometry. It is more expensive (from 25 000 tenge per panel) and takes more time, but gives an ideal result without visible blend boundaries. For Mitsubishi cars with three-layer coating, we more often recommend full painting so the color matches exactly.
After Mitsubishi body repair, for the first two weeks it is not recommended to wash the body under high pressure or apply wax to the repaired areas. Full curing of the paintwork usually takes up to a month, depending on temperature and humidity. During this period, it is worth avoiding sudden temperature changes and mechanical impacts on the restored panels.
Payment for Mitsubishi body repair is made in cash, by bank card, or by bank transfer to the service account. For large jobs, staged payment is possible: an advance for spare parts and settlement after the body and painting operations are completed. The final amount depends on the agreed list of parts and the scope of restoration work.
Yes, we guarantee color matching if the painting is done by our service. For shade matching, we use professional spectrophotometers and computer programs that take into account the paint code by VIN. But it is important to understand that over years of operation, the factory paint may fade, so perfect matching is achievable with blending onto adjacent panels. If you choose local repair, the likelihood of a visible boundary is higher. In such cases, we warn in advance and recommend full painting of the panel or with blending. This is standard practice in body repair.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
I contacted them about a dent on the door after hail. They did it quickly, in one day, neatly, without touching the factory paint. The price was 25 000 tenge, I'm very satisfied. Thank you!
I damaged the rear fender in a parking lot. At the service, everything was businesslike, they immediately quoted the cost and coordinated. The repair took two days, the painting was excellent, the color matches perfectly. I paid 65 000. The car is like new!
I got into a minor accident, scratched the front bumper. Here they repaired it without replacement — pulled it out, painted it. The quality is top-notch, you can't see at all that there was an accident. The price was 38 000 tenge, I picked it up the next day. Thank you!
When I arrived as a client, they greeted me well. I needed body repair, they did everything quickly. Paid, all work is quality. Thank you!
I have a Mitsubishi Outlander, needed door painting. They did it perfectly, the color matched 100%. Very polite staff, they explained everything. The cost was 42 000 tenge, I picked it up the next day. Many thanks!
Ordered sill repair. They did everything precisely, welded new metal, painted. The result is super, inexpensive. 58,000 tenge, two days. I recommend!
I came with a problem: the car was scratched at the back, the scratches were deep. The craftsmen touched it up so well that you can't even tell it happened. The price is 45 000 tenge. They work cleanly, don't dirty the interior. Thank you!
I handed in the car for fender replacement. Everything was done on time, as promised: in 2 days. The paint went on evenly, the body gaps are neat. Total — 88 000 tenge. Thanks for the quality, I will recommend!
I liked the service, they do everything properly. I needed to remove a dent on the door without painting. They managed in half a day, I paid 20 000 tenge. True professionals, thank you!
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.