

Hood and bumper painting on a BMW 3 Series
- Cause
- Chips on the hood and scratches on the front bumper
- Found
- Multiple chips down to metal, corrosion on the hood edge
- Done
- Painting of the hood and bumper with preparation

We will restore your BMW to its perfect factory color after an accident, scratches, or corrosion. We work with all models, match paint by code, and use a paint booth and materials from Standox, Spies Hecker. We provide a 24-month warranty on all work and the paint coating.
What the service includes: from local elements to full body painting

We remove the bumper, sand and prime the plastic, apply paint and clear coat. The client gets an even finish with no signs of repair or chips.

We prepare the fender: remove, sand, prime, and paint with blending into adjacent panels. The client gets a uniform color with no boundaries or shade mismatch.

We remove the hardware, sand and prime the door, paint and dry it in the booth. The client gets a neat coat with no runs or orange peel.

We remove the hood, degrease and prime the surface, apply paint and clear coat. The client gets uniform color across the entire panel.

We prepare the roof: sanding, primer, painting, and clear coat in the booth. The client gets a smooth surface with no spots or color misalignment.

We apply Raptor protective coating to a prepared panel or the body. The client gets a durable matte layer resistant to chips and scratches.

We paint only the damaged area of the panel with a smooth blend. The client gets an invisible repair without painting the entire panel.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
Real cases from our practice — photos and details of the work.
The cost depends on the complexity of the work, the brand of paint, and the condition of the part. We will provide the exact price after inspection.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Bumper painting | 1–2 days | 24 mo | from 28 000 ₸ |
| Fender painting | 1–2 days | 24 mo | from 30 000 ₸ |
| Door painting | 1–2 days | 24 mo | from 35 000 ₸ |
| Hood painting | 2–3 days | 24 mo | from 40 000 ₸ |
| Roof painting | 2–3 days | 24 mo | from 45 000 ₸ |
| Local painting (per part) | 4–6 hours | 24 mo | from 12 000 ₸ |
| Raptor coating (per part) | 2–3 days | 24 mo | from 40 000 ₸ |
| Raptor coating (whole body) | 5–7 days | 24 mo | from 350 000 ₸ |
| Full body painting | 7–10 days | 24 mo | from 350 000 ₸ |
| Paintless dent removal | 1–4 hours | 24 mo | from 9 000 ₸ |
| Anti-corrosion treatment | 1–2 hours | 24 mo | from 15 000 ₸ |
| Body repair with painting | from 3 days | 24 mo | from 50 000 ₸ |
| Polishing after painting | 3–5 hours | 24 mo | from 9 000 ₸ |
| Color matching (colorist work) | 30 min | 24 mo | from 5 000 ₸ |
The final cost depends on the materials used and the complexity of the work. Free inspection and an exact estimate within 30 minutes. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
Before painting, we remove the bumper, headlights, moldings, and seals. Paint does not settle on seams, and no halos remain on adjacent panels.
We read the paint code from the body and verify with a test spray. The color matches even on a faded body, and the blend is invisible.
For Raptor, we apply 4 coats with flash-off between layers. The coating is 300–400 microns thick, withstands gravel impacts, and does not chip.
We provide a 24-month warranty on the clear coat and color: if blistering, peeling, or fading occurs, we will repaint the panel free of charge.
From request to finished car — a clear process with no surprises.

You submit a request on the website or by phone, and we schedule a convenient time for your visit. We accept the car, document the paint condition, prepare an estimate, and agree on the timeline.
request on WhatsApp
We match the shade by BMW code and with a computer to ensure the color perfectly matches the factory finish.
inspection and diagnosticsWe wash and degrease the panels and remove old paint down to bare metal or primer.
estimate before work starts
We level imperfections with filler, prime, and dry in the booth at the required temperature.
work to factory procedureWe apply 2-3 coats of paint and clear coat to achieve gloss and corrosion protection.
result check
We polish to a mirror shine, reassemble the body panels, and check the gaps. We show the result in daylight, explain care recommendations, and provide a warranty.
warranty in the work orderWalk-ins welcome. By appointment — no queue.

Send a photo of the damage, the car make and year to WhatsApp. We will give you a price range, the timeframe and help you pick a booking time.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

BMW car painting at CARGID in Almaty means work in a paint booth with spectrophotometer color matching and a spray-out test, full disassembly of panels before application, and a 24-month warranty written into the work order. First comes diagnostics and a written estimate, and we start the work only after you approve it.
Painting isn't always necessary — sometimes polishing is enough. Here's how spot, panel and full painting differ, and when each scenario makes sense on a BMW body.
We do three scenarios — spot painting of an area with a blend, painting a single panel, and full body painting — and we choose the scenario based on the condition of the paintwork after inspection. Spot painting fixes a pinpoint defect within one part, panel painting covers the whole panel, and full painting covers the entire body when fading or corrosion is spread across several zones. Before work, the service advisor assesses the depth of scratches, the area of corrosion and the condition of the clear coat around the damage. If the defect is pinpoint and the clear coat around it is still good, spot work with a blend is cheaper in scope and preserves the factory finish on the rest of the part — but it requires the blend boundary to fall in a zone where it isn't visible in the sun. On a faded body, the difference in shade shows up more strongly, so panel or full painting is chosen more often there.
| Panel | Common reason for painting | What we check before work |
|---|---|---|
| Bumper | chips, parking scuffs, cracks | the geometry of the plastic, the mounts, the prep for paint |
| Fender | corrosion along the edge, dents | the condition of the metal under the old paint |
| Door | scratches down to the primer, dents | the seams with adjacent panels, the moldings |
| Hood | gravel chips, clear coat fading | evenness of shade over a large area |
| Roof | fading, corrosion at the drains | blends onto the pillars and the rear quarter panel |
For Raptor we apply 4 coats with drying between coats, and the coating ends up 300–400 microns thick and withstands gravel impacts without chipping. Between coats we hold a process pause so each coat sets and doesn't shift under the next one — otherwise the coating loses its uniformity and starts peeling sooner. Raptor isn't "just another paint" but a protective coating with a different application technology and a matte texture. If the goal is to keep the factory gloss and metallic color, this scenario isn't for you: it's chosen for resistance to mechanical damage in off-road use and on gravel roads. On BMWs, Raptor is more often chosen for bumpers and the lower part of the body, where the risk of chips is highest — while visible panels are left under gloss.
On BMWs with metallic, pearl and xirallic, the shade depends on the angle of light and on body fading — so the paint code is only a starting point.
We match color with a spectrophotometer — we read the paint code from the body and verify with a spray-out test, so we hit the shade even on a faded body. The device reads the spectrum from several points on the panel: with metallic and pearl, the pigment shifts at different angles, and the factory formula on aged paintwork gives a noticeable difference in the sun. We do the spray-out test on the part itself, not on a test card — that way you see how the mix behaves on your specific finish. In my experience, the blend most often shows up at the seam between the fender and the door and on the hood, where fading is uneven. If a part is done with a blend, we feather the boundary onto the adjacent panel rather than cutting it off at the edge — then the difference doesn't read in the light or in the shade. Bring the car for color matching on a clear day: in daylight the discrepancy is more noticeable than in the booth.
Before application we remove the bumper, headlights, moldings and seals — the mix doesn't lay down on seams, and no halos are left on adjacent parts. Disassembly takes time, but it's exactly what separates careful work from a repair "in place": the rubber seals and moldings press the paint against the edge, and the clear coat lays down in a ridge. After assembly, that ridge shows as a stripe of a different shade along the seal, and on the bumper as a step at the seam with the fender. We paint the removed parts separately, which gives an even coat both along the edge and in hidden areas. Then we put the parts back and check the gaps so nothing rubs after assembly. Removing a part is cheaper than repainting the adjacent panel later because of a halo — and this is the case where an extra step saves the customer a return visit.
The timeline depends on the scope of work and the condition of the part. Here's what the time is made up of and how work starts in the shop.
Timing comes down to prep, curing in the booth, and reassembly — treating one panel takes less time than a full body repaint, and we give you the exact timeline after inspection. Painting a BMW with full disassembly of the panels takes longer than a local job with a blend. First comes disassembly: we remove the bumper, headlights, moldings, and seals, then sanding and primer, then color and clear coat in the paint booth. After curing, the panels are reassembled and the blends are polished. You can't speed things up with a "paint job without a booth" without losing quality: the booth gives stable temperature and no dust, otherwise the clear cures unevenly and you get orange peel that then has to be sanded and polished out. Saving on the booth costs you an extra day fixing the surface. That's why we don't cut stages at the expense of quality: disassembly, sanding, primer, color and clear coat, curing, and reassembly all follow the process strictly, and we give you the timeline after inspecting the panel.
We take you by appointment with no line, daily from 09:00 to 20:00. The service advisor takes in the car and manages the work order through to handover. Our BMW painting in Almaty starts with diagnostics: the technician inspects the body, records the damage, and prepares a written estimate. Repair starts only after you agree — that way you see the scope of work and the choice of parts (OEM, aftermarket, or your own) before the car goes into the booth. We take photos at the key stages, and we show you the old parts and hand them over to you. Come to 129 Mukagali Makataev St. — with an appointment we take the car right away, no waiting in line. You can book by phone or through the website: the service advisor will confirm the scope of work and offer a convenient time during the day.
A painting warranty isn't a vague line from an ad — it's a specific term and a list of conditions. Here's exactly what's covered after handover and where our responsibility ends.
We give a 24-month warranty on painting and body repair, and the term and conditions are written into the work order and the completion certificate at handover. Twenty-four months is twice the 12 months we give on the engine, cylinder head, or electrics in our own warranty table. Our BMW painting comes with all conditions recorded in the documents, so you never have to prove the warranty term from memory. The service advisor handles the paperwork and manages the work order from the initial inspection to the test drive before handover. The warranty covers the work performed and the parts installed: if bubbles or orange peel appear on the BMW due to our work after the coating is applied, diagnostics for the warranty case are free. In my view, it's worth keeping the work order until the term ends — it records the date, the list of work, and the conditions used to resolve any disputed case.
Paint quality shows not in the shop but outside, when the car sits under the open sky. Here's what happens at handover and what to do with the body in the first weeks so the result lasts.
We show you the result in daylight, take photos at the key stages, and do a test drive before handover. The service advisor manages the work order through to handover and, during the inspection, opens the hood, trunk, and doors so you can see the treated edges and seams, not just the face of the panel. We look at the shade and orange peel at an angle to the sun, not straight on: in raking light, tone differences and clear coat texture show up most clearly. A paint thickness gauge will show the clear coat layer at a future sale, and that's fine if the thickness is within the factory range rather than several times higher. At handover, walk around the body with a flashlight along the edges and wheel arches — undercoverage at a seam shows up there, not on the flat surface.
In the first weeks after painting, the clear coat is still reaching its final hardness, so it's best to hold off on aggressive washing and polishing, and to clear touchless washing with the technician at handover. Fresh clear coat is more sensitive to abrasives and chemicals than a factory finish, so brushes and stiff sponges are the main risk during this period: micro-scratches on a not-yet-cured layer stay forever. Body polishing is postponed until the clear coat fully cures, and ceramic coating or paint protection film goes on top of fresh paint only after the coating has fully set. At the car wash, tell the operator about the fresh paint — many touchless lines have a gentle mode without hot wax, and it noticeably reduces the load on the new layer. For the first week, it's better to stick to cool water without wax shampoo, and to remove bird droppings and tar right away so they don't eat into the clear coat.
Body painting requires decisions at every stage — from choosing the scope of work to the final inspection. Below we've gathered what determines the result and how long the coating lasts.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost of BMW painting in Almaty ranges from 12,000 to 350,000 tenge. The price depends on several factors: the scope of work (local painting, one part, full body), the condition of the body (presence of rust, dents requiring repair), the chosen type of paint coating (acrylic, metallic, ceramic), as well as the BMW make and model (for example, painting a bumper or fender will be cheaper than the entire body). Our service CARGID provides a full estimate before starting work. The exact cost can be found out after a free inspection.
The time required for BMW painting depends on the scope of work. Local painting (for example, scratches on a door) takes 1-2 days, painting one part (fender, bumper) – 2-3 days. Full body painting takes from 7 to 14 days. This period includes preparation, priming, painting, drying, and polishing. We state the exact time after the inspection; it is fixed in the contract. If you are in a hurry, mention this when booking – for urgent orders, acceleration is possible, but with a surcharge for urgency.
Yes, we provide a written warranty on all types of painting work. The warranty is 24 months for the paint coating and 24 months for anti-corrosion treatment. The warranty is valid subject to compliance with the rules of car care after painting. During the warranty period, we fix such defects as paint peeling, blistering, corrosion under the coating free of charge, provided they did not arise from mechanical damage or chemical exposure. The warranty is specified in the contract.
Yes, at CARGID advance booking is mandatory, as we have a high workload. You can book by phone or via WhatsApp, usually 3-5 days in advance. If you need urgent painting, call us – we will try to find a 'window' earlier, but there may be a small surcharge for this. When booking, specify the BMW model, the desired scope of work, and a convenient time – this way we can prepare the necessary materials and equipment for your arrival.
Technically, you can bring your own materials and parts, but we strongly do not recommend it. We work with professional materials from trusted brands (Sikkens, Standox, RM) and do not guarantee the quality and compatibility of paints purchased independently. Moreover, we give a 24-month warranty on our materials. If you still bring your own, we are not responsible for the result if defects arise due to them. Our materials are already included in the estimate, and you can always check their cost.
If you find defects after painting (runs, orange peel, color unevenness, peeling), contact us immediately, preferably within the first 2-3 days. We will conduct an inspection and fix the defects free of charge if they occurred due to our fault. In complex cases (for example, complete paint coating peeling), repainting is possible. If you find the problem later, but within the warranty period (24 months), you can still contact us – we will resolve the issue. All work is recorded in the contract, so your rights are guaranteed.
At CARGID we offer three painting options: local (painting over scratches and chips with color matching), part (painting one or several parts: bumper, fender, door), and full (painting the entire body with full preparation, including disassembly, rust removal, priming, painting in a booth, and final polishing). Full painting can be with or without color blending. The difference is also in the materials used: for full painting, we use improved two-component primers and highly resistant clear coats. The price increases accordingly.
After BMW painting, it is important to follow several rules: do not wash the car for the first 7 days so that the clear coat dries completely. Do not use aggressive detergents and brushes – washing only by hand with a soft sponge or touchless. Do not polish the body for 30 days. Avoid bitumen, tree sap, bird droppings – remove them promptly. For the first time, do not load the car – do not carry heavy loads on the roof. Following these rules will extend the warranty and preserve the appearance of the coating. We will provide detailed instructions after painting.
Yes, at CARGID payment in parts is possible. We accept cash, bank cards, and also provide installments for a period from 3 to 6 months for orders from 200,000 tenge. To arrange installments, an ID card and possibly proof of income will be required. Terms are discussed individually. For example, for full BMW painting, you can make a 50% prepayment and pay the rest in equal installments. Payment by bank transfer for legal entities is also possible. Check all details with the manager.
Yes, for color matching we use a professional spectrophotometer, which guarantees an exact match to the factory color with up to 99% accuracy. It is based on the BMW color database and the ability to mix paint according to factory codes. Please note: if the body has already been repainted, the matching accuracy may decrease – then a specialist may suggest matching the color using your sample (for example, unscrewing the fuel filler door). The final decision is made after the inspection, we aim for a quality result.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
I had the bumper painted on my BMW X5 after a bad parking job. They did it quickly, in 2 days, and matched the color perfectly. 145,000 tenge, I think it's reasonable for such quality. They returned the car clean, thanks!
They painted the door on my BMW 3 Series, there was a deep scratch from a shopping cart in the parking lot. The guys did everything neatly, the color is indistinguishable from the factory one. I paid 180,000, they took 3 days. Very pleased!
They painted the fender on my BMW 5 Series, there was a chip from a stone. They did it in a day, 60,000 tenge. The color matched perfectly, not a single complaint. I recommend!
I ordered hood painting for my BMW X6. The car is old, there was a chip down to the metal. The craftsmen prepared it, painted it, everything is great. Price 120,000, time 2 days. Pleasantly surprised by the service.
I had the side skirts painted on my BMW 4 Series, there were scuffs from feet. They did it perfectly, you can't even tell it was painted. 95,000 tenge, finished in one day. Many thanks!
I am satisfied with the service. They painted the door of my BMW 3 Series, there was a scratch. They matched the color precisely, delivered on time. I paid 200,000 tenge, flawless work. Thanks!
I needed roof painting on my BMW 5 Series after hail. They did everything quickly, in 3 days, 160,000 tenge. Excellent quality, the clear coat is like new. Thanks for the work!
I had the mirrors painted on my BMW 7 Series, there were chips. They did it in a day, 45,000 tenge. Very neat, the color matches. I thank them for the speed and quality!
I contacted them about painting the front bumper on my BMW X3. There were scratches from branches. The craftsmen smoothed everything out, painted it, and returned it for 130,000 tenge, they took 2 days. Done with quality, the color is indistinguishable.
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.