

Mitsubishi L200
- Cause
- Scratches and scuffs on the tailgate from cargo
- Found
- The paintwork on the tailgate is covered in deep scratches, metal intact
- Done
- Sanded the tailgate, degreased, applied primer and Line-X coating, leveled the porosity

Protect the body and parts from chips, scratches, and corrosion for years. Line-X polyurea forms a durable, elastic layer up to 2 mm thick. We perform a full preparation cycle: stripping, primer, application. Options for SUVs and commercial vehicles, as well as for protecting trunks and underbody.
Line-X coating for protecting the body and underbody — works on this page

We apply Line-X to rocker panels and wheel arches as a set. It covers the areas most vulnerable to road debris and corrosion.

We treat the underbody with Line-X partially, up to 60% of the area. It protects the metal from moisture, gravel, and road chemicals.

We cover the hood and roof with Line-X. The layer takes on chips and scratches, preserving the body.

We apply Line-X to the front and rear bumpers as a set. Protection from impacts, parking scratches, and chips.

We cover the pickup truck with Line-X completely: body and cab. A single protective layer over the entire vehicle.

We coat the tow hitch and protective elements with Line-X. Resistant to impacts, stones, and corrosion.

We treat the hidden cavity with anti-corrosion, then coat with Line-X. A barrier against moisture and corrosion from the inside.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
We show real vehicles that we protected with Line-X coating.
Line-X protective coating for the body, trunk, underbody, and off-road elements. Prices are approximate; the exact cost depends on the condition of the surface and the scope of work.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Inspection and diagnostics of the body condition before applying Line-X | 30 minutes | 24 mo | free |
| Washing and degreasing the surface before application | 1–2 hours | 24 mo | from 5 000 ₸ |
| Treatment of hidden cavities with anticorrosion agent followed by Line-X coating (per cavity) | 2–3 hours | 24 mo | from 12 000 ₸ |
| Applying Line-X to the trunk tub/floor (passenger cars) | 3–4 hours | 24 mo | from 25 000 ₸ |
| Line-X coating of sills and arches (set per vehicle) | 4–5 hours | 24 mo | from 35 000 ₸ |
| Line-X coating of the vehicle underbody (partial, up to 60% of area) | 5–6 hours | 24 mo | from 50 000 ₸ |
| Full Line-X coating of the body (SUV, standard size) | from 2 days | 24 mo | from 250 000 ₸ |
| Line-X coating of the hood and roof (protection against chips and scratches) | 4–5 hours | 24 mo | from 40 000 ₸ |
| Line-X coating of bumpers (front and rear, set) | 4–5 hours | 24 mo | from 45 000 ₸ |
| Applying Line-X to the running boards and sills of an SUV | 3–4 hours | 24 mo | from 30 000 ₸ |
| Full Line-X coating of a pickup truck (bed + cab) | from 3 days | 24 mo | from 350 000 ₸ |
| Urgent Line-X application (priority, subject to availability) | 1 day | 24 mo | + 30% to the cost of work |
| Mobile Line-X application (at the customer's address, within Almaty) | from 1 day | 24 mo | from 100 000 ₸ |
| Surface preparation: removal of old paint, rust, body filling | from 5 hours | 24 mo | from 20 000 ₸ |
| Reapplication of Line-X (repair of damaged area) | 2–3 hours | 24 mo | from 15 000 ₸ |
| Line-X coating of tow hitch and protective elements | 2–3 hours | 24 mo | from 15 000 ₸ |
The exact cost is calculated by a specialist after inspection. Different Line-X compounds are used for each type of surface. The work is carried out in a special chamber following the technology. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We set the thickness with a notched trowel and measure with a thickness gauge on each element. Less — it won't hold gravel, more — it cracks in frost.
We pour rocker panels and arches in one pass, without breaks. A joint is the only place where water and rust get in.
We polymerize in a chamber at 60 °C for at least 6 hours. The warm layer gains strength and doesn't stick to hands a day later.
We cover peeling and cracking. You come in — we recoat the area at no extra cost for material and labor.
We explain step by step what happens to your car from request to pickup.

You leave a request on the website or by phone, we select a convenient time and day. At the service station, the technician inspects the surfaces to be coated and assesses their condition.
request on WhatsApp
We quote the exact price in tenge for work, materials, and time — no hidden extra charges.
inspection and diagnosticsWe sand the surfaces, degrease them, and carefully mask areas that should not be coated.
estimate before work starts
For better adhesion, we apply a special primer that enhances the coating's grip.
work to factory procedureWe evenly apply the Line-X coating to the prepared surface using special equipment.
result check
We check the thickness and uniformity of the layer, then let the coating dry and polymerize. We remove the masking, perform a final check, and hand over the car and warranty card.
warranty in the work orderWalk-ins welcome. By appointment — no queue.

Send a photo of the damage, the car make and year to WhatsApp. We will give you a price range, the timeframe and help you pick a booking time.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

CARGID applies Line-X coating in Almaty to sills, wheel arches, underbody, bumpers, hood, and the entire pickup. We set the thickness to 2.5–3 mm with a notched trowel and measure it with a thickness gauge on each element, pour sills and arches in one pass without seams, and cure in a chamber at 60 °C for at least 6 hours. The work warranty is 24 months, recorded in the work order.
Line-X is not a single service but a set of areas for a specific task. We explain what the protective layer does for each body area and how to build your scope of work from these areas.
We apply Line-X to sills and arches as a set per vehicle and to the underbody up to 60% of the area — these are the areas that take gravel and winter road chemicals first. The sill edge and the inner side of the arch rust first: everything from under the wheels flies there, and in winter salt from the roads adds to it. The layer withstands stone impacts and does not let moisture reach the metal, so the edge stays intact longer than factory paint. On the underbody, the compound covers weld seams and low points where corrosion usually gets in. Line-X on the underbody does not replace anti-corrosion treatment of hidden cavities but complements it: the coating works on the outside of the metal, while the anti-corrosion treatment works inside the cavities where spraying cannot reach. In my opinion, it is the pair of "Line-X outside, anti-corrosion inside" that fully protects the body from rust.
We coat the hood and roof for protection from chips and scratches, bumpers as a front and rear set, the bed and trunk floor on passenger cars, and the pickup entirely on the body and cab. The hood suffers from gravel first on the highway, the roof from branches and ice, and the bumper catches parking scuffs at low speed. For a pickup, full treatment covers both the cargo bed and the sides: the textured layer is not afraid of loose cargo or tools. In the bed, Line-X does not slide under load due to the textured surface of the layer — this is a result of the 2.5–3 mm thickness, not a separate treatment. We also coat the tow hitch and protective elements: they take hits from the trailer and parking. From experience, the textured surface on the trunk floor is more convenient than smooth plastic — things do not slide around on it when turning.
| Area | What it protects | Work format |
|---|---|---|
| Sills and arches | gravel, road chemicals, edge rust | set per vehicle |
| Underbody | gravel, salt, corrosion from below | up to 60% of the area |
| Hood and roof | chips, scratches | per element |
| Bumpers | chips, parking scuffs | front and rear as a set |
| Bed and trunk floor | wear, cargo sliding | passenger cars |
| Pickup entirely | the whole body and cab | full coating |
Line-X quality rests on three parameters — thickness, seam, and curing. We break down each and show how we control them on our lifts.
We cure the coating in the booth at 60 °C for at least 6 hours — warm material builds strength instead of staying tacky a day later. The paint booth holds the temperature evenly across the whole body, so the rocker panels, wheel arches and underbody set the same way, with no cold spots near the floor. We apply Line-X in Almaty with the same curing schedule, so the layer builds strength evenly across every area. There's no point picking the car up early: outdoors the material won't cure the way it does in the booth, and early load leaves marks in the texture. Application time depends on how many areas are covered and on surface prep — the service advisor gives the exact time after inspection and records it in the work order. Plan pickup for the day after curing: by then the layer has reached working hardness, and the car leaves without the risk of damaging fresh Line-X on the very first drive.
Line-X holds to a surface only as well as that surface was prepped. Here's what we do with rust, old paint and the previous layer.
We apply over an existing Line-X layer after inspection: if the old coating holds and there's no peeling, we prep the surface and cover it; if there are blisters, we strip down to bare metal. The service advisor inspects and diagnoses the body before application, and he also manages the work order until the car is handed over. Line-X doesn't damage factory paint: it goes on top and, if needed, comes off with it. But paint doesn't breathe under it, so corrosion spots have to be ruled out before application — otherwise everything will swell from the inside, and redoing it will cost more than the initial prep. Rust in a closed space keeps growing and lifts the layer — stripping to bare metal is cheaper than redoing the job a year later.
Timing depends on how many areas are covered and on the condition of the surface. Here's how a visit to the shop works and what the job time is based on.
First an inspection and body diagnosis, then a written estimate — we start work only after the client agrees, and the car is received by the service advisor, who manages the work order until handover. The inspection takes about half an hour: the technician walks around the body, checks the rocker panels, wheel arches and underbody for hidden corrosion, and marks areas with old paint and chips. Based on that we draw up an estimate listing the areas and prep stages, agree the scope — and only then put the car into work. Booking is required: the shop is open daily from 09:00 to 20:00, seven days a week, and with a booking we take you without a wait; the address is 129 Mukagali Makataev Street, close to the center, easy to stop by on the way. A written estimate before work starts rules out surprises along the way: if hidden rust is found during disassembly, it's agreed separately rather than added silently. We apply the Line-X protective body coating according to the agreed list of areas, so the client knows in advance exactly what will be included in the job.
The time adds up from surface prep, the spraying itself and curing in the booth for at least 6 hours — the more areas and the more worn the surface, the longer the prep. Rocker panels and wheel arches on one car are usually a single visit with drying, while coating a whole pickup stretches over several stages: the bed and the cab go one after the other, with curing between passes. We work daily from 09:00 to 20:00, so we schedule long jobs so the car doesn't sit in the shop an extra night for no reason. A full pickup coating isn't one day of spraying but a chain of stages with drying in between; it's better to plan the visit with some margin rather than "I'll pick it up by evening."
A warranty and the option of a local repair are what set a craftsman's work apart from "sprayed it and forgot about it." Here are the terms, the scenario of a chip a year later, and what actually keeps the layer holding.
We cover a damaged Line-X area locally — reapplying over a chip or scuff without repainting the whole element. We sand the border between the old and new layer, degrease it and apply the material in the same pass as the initial job, so the transition doesn't show on a rocker panel or wheel arch. After 3–5 winters with road chemicals the layer holds thanks to its 2.5–3 mm thickness and a seamless joint, not thanks to care — we fill a chip down to the base point by point before corrosion starts working underneath. Regular washing without harsh chemicals or abrasives slows fading in the sun: a stiff brush and solvents wear away the top layer ahead of time. Reapplying to one element takes less than a shift, but showing up with a crack that rust has already started under costs more than sealing a fresh chip in the first few weeks.
We've put together a single list of the parameters used to judge the result of body coating — they're checked before the work order is opened, otherwise any talk about the coating stays theoretical.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost of Line-X coating in Almaty is calculated individually and depends on the area and complexity of the surface, the type of material (automotive or industrial), the thickness of the layer, and the need for surface preparation (sanding, priming). On average, the price per square meter starts from 12,000 tenge for standard coating and can reach 25,000 tenge for a reinforced or multi-layer option. We prepare an exact estimate after inspecting the item. All prices are fixed in the contract. Exact prices are in the price list on this page.
The average duration of work is from 1 to 3 days depending on the size of the object and the condition of the surface. If preparation is required (removing old coating, priming), the timeline may increase to 4-5 days. Full curing of the coating occurs within 24 hours, after which the vehicle can be used, but intensive loads should be avoided in the first 48 hours. We state the exact timelines after diagnostics.
Yes, we provide a 24-month warranty on application quality and coating integrity, provided operating conditions are met. The warranty covers peeling, cracking, and fading. If defects caused by us occur during the warranty period, we will fix them free of charge as soon as possible. Important: the warranty does not apply to mechanical damage from accidents or improper care.
Yes, an appointment is required, since Line-X application requires special preparation and takes several hours. You can call us or submit a request on the website, and we will find a convenient time. Usually appointments are made 1-2 days before the planned date. This allows us to reserve the necessary equipment and materials. On the appointment day, arrive with a clean surface (you can wash it at our place).
We use only original Line-X materials supplied directly from the manufacturer. This guarantees the quality and durability of the coating. Using third-party materials is not allowed, as they may not meet technological requirements and may lead to peeling. If you want to order a specific color or type of coating, we will coordinate this with you, but we purchase the materials ourselves, which also affects the price.
If you discover application defects (unevenness, bubbles, gaps) during the warranty period, contact us within 3 days of discovery. We will conduct an inspection, and if the defect was caused by us, we will redo the coating free of charge. We value our reputation and always complete the work with a quality check in the client's presence. Before signing the acceptance act, you have the right to refuse acceptance if something is unsatisfactory.
The standard package includes applying a protective layer 2-3 mm thick in one or two layers, which is sufficient for most tasks (protection from chips and corrosion). The premium package assumes a thickness of 5-6 mm, higher resistance to impacts and abrasion, the use of special additives for UV protection, and a wider color palette. Premium also includes mandatory preliminary preparation with removal of the old paint coating and priming, while in the standard package this may be optional. The premium price is on average 30-40% higher.
Caring for Line-X coating is simple: regularly wash the surface with water and a mild detergent, avoiding aggressive chemicals and abrasives. In the first 48 hours after application, do not allow water, dirt, or mechanical loads to contact it. Later, do not use a high-pressure washer at a short distance. For UV protection, it is recommended to treat it once a year with a special compound (we can offer it). Chips and scratches that appear during use can be repaired locally.
Payment for Line-X application work is accepted in cash and by bank transfer, including card payment at the service center. The cost is calculated based on the actual treated area and depends on the layer thickness and the degree of surface preparation. The exact amount is agreed after inspecting the part and determining the scope of work.
Yes, it is possible, but only after thorough preparation: the old coating must be cleaned of dirt, degreased, and sanded to create adhesion. If the old coating is peeling or has severe damage, it must be completely removed before applying the new one. This increases the timeline and cost. We always recommend consulting with our technician, who will assess the condition of the surface and give an accurate forecast.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
I ordered Line-X application on the hood and front bumper. It took two days, as they said. The result is excellent: the coating went on evenly, and there have been no chips on the hood for three months. The price is 87,000 tenge, which is cheaper than others in the city. I recommend it.
I coated the underbody and sills on my Niva. The technicians did everything precisely: first they treated it with anti-corrosion, then applied Line-X. Now I'm not afraid of dirt and road chemicals. Two months have passed — everything holds up perfectly. The price is 56,000 tenge, I'm satisfied.
I decided to protect the pickup truck body from scratches during cargo transportation. I booked at CARGID on a friend's recommendation. They applied Line-X to the tailgate. The work took one day, the quality is superb — now I can throw cargo without worry. Thank you!
Excellent! They coated the new body with Line-X. I got the car for hunting, and now the vehicle isn't afraid of branches and rocks. They did everything in two days and accepted the car within the agreed time, even I was surprised. The price is 98,000 tenge for the full set — fair.
My husband ordered coating for the sills on our Solaris so they wouldn't get scraped in winter. The work was done in a day, the price is reasonable — 34,000 tenge. The result was pleasing: the coating is dense and not slippery. I think now we'll coat the bumpers too.
I treated the trunk on a Hais. Before, everything was scratched and rusty, now it's like new. The floor and walls were covered with a thick layer, moisture no longer gets in. Duration — 3 days, as promised. Price 126,000 tenge, for that quality it's quite okay.
I had Line-X applied to the wheel arches of my Captiva. There were chips from gravel, now everything is covered with a durable coating. The technicians handled it quickly in 5 hours, the price is 12,000 tenge. I'm very satisfied and will recommend it to friends.
My husband and I ordered underbody coating for a new car for city driving to protect it from road chemicals. The service did everything quickly: they finished in a day. They used quality material and provided a warranty. The total is 45,000 tenge. Thank you for the work.
The Line-X coating staff did a good job on the cargo bed of the Toyota Hilux. Everything was fast, finished in 2 days, and delivered at the agreed time. The coating is strong, now I'm not afraid to load cargo. Price: 105,000 tenge. Thank you!
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.