We replace brake pads on all Lada models: Priora, Kalina, Granta, Vesta, and others. We work fast — 1-2 hours, with a 6-month warranty. Before replacement, we inspect the calipers, guide pins, and brake discs — so the new pads last long and don't squeak. Book online, and we'll solve your brake problem at a convenient time.
Cost of labor excluding the price of parts. Exact price after diagnostics.
Service
Duration
Warranty
Price
Front pad replacement on Lada (except Vesta)
1–2 hours
6 mo
from 5,000 ₸
Rear pad replacement on Lada (drum)
1–2 hours
6 mo
from 6,000 ₸
Rear pad replacement on Lada (disc)
1–2 hours
6 mo
from 5,500 ₸
Pad replacement on Lada Vesta (front)
1–2 hours
6 mo
from 5,500 ₸
Pad replacement on Lada XRAY
1–2 hours
6 mo
from 6,000 ₸
Pad replacement on Lada Largus
1–2 hours
6 mo
from 6,000 ₸
Pad replacement on Lada 4x4 (Niva)
1–2 hours
6 mo
from 6,000 ₸
Pad replacement with caliper service (2 axles)
2–3 hours
6 mo
from 10,000 ₸
Brake disc + pad replacement (1 axle)
2–3 hours
6 mo
from 5,500 ₸
Brake fluid replacement
1 hour
6 mo
from 3,000 ₸
Caliper repair (repair kit replacement)
2–3 hours
6 mo
from 7,000 ₸
Caliper guide replacement
1–2 hours
6 mo
from 4,000 ₸
Brake disc resurfacing (1 axle)
1–2 hours
6 mo
from 4,500 ₸
Brake system diagnostics
30 min
6 mo
from 1,500 ₸
Handbrake replacement (pads/cables)
2–3 hours
6 mo
from 4,000 ₸
ABS sensor replacement
1–2 hours
6 mo
from 3,000 ₸
All works include a brake system check. 10% discount for comprehensive brake repair (pads + discs + fluid). Warranty periods — see the page «Warranty»
06
Why Choose Lada Brake Pad Replacement at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
6MO
warranty on labor — the term is stated in the work order.
Calipers
Brake discs
6-month warranty
01
Bleeding 2 Circuits
After replacement, we bleed both circuits with fluid renewal. The pedal becomes firm, without sinking.
02
Disc Measurement 0.05 mm
A thickness gauge and dial indicator show wear and runout. If the disc is below minimum, we warn before assembly, not after.
03
1 Hour per Axle
We replace front pads in this time with cleaning and lubrication. Rear ones take longer if the drums or caliper require disassembly.
04
6-month Warranty
We cover the work: squeak, sticking, or leak due to our assembly. Come back — we will redo it at our expense.
07
How We Replace Pads on Lada
Steps.
We explain step by step what happens to your car from the moment you book until the keys are handed over.
01
Inspection and Diagnostics
You leave a request on the website or by phone, and we select a convenient time and day for your visit. We lift the car, remove the wheels, and assess the condition of pads, discs, calipers, and brake hoses.
request on WhatsApp
02
Work Approval
We report what is worn, show the parts, and agree on the cost and scope of work before starting repairs.
inspection and diagnostics
03
Pad Removal
We unscrew the guides, remove the old pads, and clean the caliper and seating areas from dirt and rust.
estimate before work starts
04
Mechanism Check
We check the condition of brake discs, caliper pistons, and dust boots — lubricating the guides if necessary.
work to factory procedure
05
New Pad Installation
We install new pads, secure them, assemble the caliper, and check the movement of the piston and springs.
result check
06
Test Drive and Handover
We put the wheels back, press the brake pedal several times so the pads settle into working position. We take a test drive to check braking efficiency and the absence of unusual noises, then return the car.
Car service in Almaty. We reply on WhatsApp and by phone.
5 000 ₸Front pad replacement on Lada
10 · Useful
Lada Brake Pad Replacement in Almaty with Warranty in the Work Order
Author: Роман Вернерgeneral car repair technician, 13 years of experience
Published Updated
At CARGID, we replace Lada brake pads in Almaty by axle and brake type; front pads take about an hour per axle. We start with diagnostics and a written estimate, then perform the work with cleaning and lubricating the guide pins, bleeding both circuits, and checking disc runout to within 0.05 mm. The warranty on pad replacement is 6 months, recorded in the work order.
Signs of Wear and When It's Time to Replace Pads on a Lada
Brakes on a Lada wear predictably, but squealing doesn't always mean the pads are at fault. We explain which signs actually indicate replacement and when delaying repairs becomes dangerous.
How to Tell It's Time to Replace Pads on a Lada
Lada pads are replaced based on actual lining wear, and the warning signs are squealing during braking, a longer pedal travel, and steering wheel vibration. Front pads on the Priora and Granta wear faster than rear drum pads because the rear axle takes less braking force. Wear is checked with a thickness gauge or visually through the inspection hole in the caliper without removing the wheel. Steering wheel vibration usually indicates disc runout rather than the pad itself and is fixed separately. Squealing doesn't always come from the pads — on a Lada, a seized caliper guide pin often causes the noise, and replacing pads without servicing it won't solve the problem. So at the first squeal, ask to check the guide pins too, otherwise the new part will start squealing within a week.
The Danger of Driving Until Metal and What Suffers First
When the lining is worn down to metal, the pad starts acting like a cutting tool and within tens of kilometers removes more from the disc than during its entire previous life. Metal-on-metal produces a characteristic grinding, the pedal sinks deeper, and braking distance on wet asphalt increases noticeably. The brake disc suffers first: grooves and deep scoring appear, and thickness drops below the minimum. A disc worn below the minimum can no longer be saved by resurfacing — it must be replaced, which costs more than timely brake upgrades. If the brakes start squealing on the road, don't postpone the inspection: diagnostics in Almaty takes less time than replacing a pair of discs. A thickness gauge and dial indicator show wear and runout before disassembly, so the decision is based on facts, not guesswork.
How Lada Brake Pad Replacement Is Performed by Axle and Brake Type
Lada brake pad replacement in Almaty is a job where front disc and rear drum brakes differ in both the scope of work and time. We show the work involved for each axle and what affects the duration.
What's Included in Front and Rear Pad Work
Cleaning the seating surfaces: we remove carbon deposits and dust from the clips so the new pad seats evenly.
Lubricating the guide pins: we apply a heat-resistant compound to the pins — without it, the mechanism seizes.
Inspecting the piston and boots: we check piston movement and offer a repair kit if worn.
Bleeding both circuits: we refresh the brake fluid, and the pedal becomes firm without sinking.
Warranty in the work order: we record the term and conditions in the work order and the acceptance certificate upon delivery.
We replace front pads in an hour per axle; drum brakes take longer because the assembly requires disassembly and, on some models, parking brake adjustment. Replacing pads on a Priora with a seized mechanism takes longer, so we inspect the caliper and drum before assembly. Work on both axles takes more than an hour — when booking, specify the model so the technician can prepare parts in advance. On the Vesta and XRAY, front pads are replaced as quickly as on the Granta, but the rear axle on the Niva takes more time due to drum disassembly and parking brake adjustment. If the discs have already been replaced on the car, the technician will compare their thickness with the minimum tolerance before installing new pads — this way the pair will last its full stated life. The service advisor will give the exact time for your model when booking, and the actual time will be recorded in the work order after the job.
When Only Pads Are Replaced and When Discs or Calipers Are Needed
A new pad doesn't always solve the problem: sometimes the cause lies in the disc itself or a sticking caliper. We show how we identify this before assembly, not after the first drive.
How We Check the Disc and Caliper Before Work
Before any work, we check disc thickness with a micrometer and disc runout with a dial gauge to a tolerance of 0.05 mm, along with the condition of the caliper piston and guide pins. The micrometer shows how much disc material is left compared to the minimum allowed for the specific model — Priora, Granta, Vesta, Niva, or XRAY. The dial gauge catches axial runout, which is what makes the steering wheel and pedal shudder when braking at speed. We pull the guide pins, inspect the boots and grease: on cars with mileage driven in Almaty traffic, seizing is a standard story, since dust and moisture build up in them over the years. Uneven pad wear on the Vesta and Granta usually points to a sticking caliper rather than the pads themselves. If that isn't caught during diagnostics, a fresh pair will wear just as unevenly and braking distance will stay the same.
What to do if the disc is below minimum or the caliper is seized
If the disc is below minimum, we tell you before reassembly and offer either a disc replacement or resurfacing, and a seized caliper we rebuild with a repair kit or replace the guide pins. Resurfacing removes grooves and restores a flat surface, but only while thickness stays within spec — we don't do it on a disc at the limit. A caliper repair kit includes new boots and grease for the guide pins; if the piston is scored, we replace the whole unit. After the work we bleed both circuits with fresh fluid. A soft pedal after new pads are installed usually means air in the circuit — so we bleed right away instead of leaving it until the next morning. That way the pedal stays firm with no sinking, the brakes engage on the first press, and the driver doesn't get used to a mushy feel.
How the visit goes and how long pad replacement takes
The visit starts with diagnostics and a written estimate, not with immediately tearing the assembly apart. We'll show you how a day at the shop works, what steps the customer sees along the way, and how long the procedure takes on their model.
Diagnostics, written estimate, and customer approval
We start with brake system diagnostics and a written estimate, and we only begin the repair after the customer approves — no surprises at the end. The car is received by the service advisor: he inspects the pads, measures lining thickness, checks the disc with a micrometer, and listens to how the pedal behaves. On the lift we also check the boots, guide pins, and hoses — on Almaty's broken roads these parts wear faster. Based on the inspection, the owner gets a paper estimate listing the work and parts, and only after signing does the technician pick up a tool. An estimate before disassembly keeps us disciplined too: if a caliper or disc turns out to be needed along the way, that's approved separately rather than quietly added to the bill. Ask for an estimate before work begins — it then shows exactly which items were part of the work order.
Photo report, showing old parts, and a test drive
Step-by-step photo report: we document the condition of the pads and disc before disassembly, the removed parts, and reassembly — the customer sees what they're paying for.
Old parts in your hands: we show you the worn pads and give them to you, so you can see exactly what was replaced.
Test drive before handover: the technician takes a lap, checks the pedal, that there's no squeal, and that braking is even on both axles.
Work order in your hands: the document keeps the list of work, the 6-month warranty, and the terms — easy to come back with a question later.
Warranty on the work, customer-supplied parts, and break-in after replacement
A warranty on brake system service and a warranty on the part itself are different things, and confusing them doesn't benefit the owner. We break down what the 6-month warranty covers, how customer-supplied parts work, and how to break in new pads in city driving.
What the 6-month warranty covers and what happens with customer-supplied parts
We give 6 months on the work performed and record the term and conditions in the work order and the completion certificate at handover. The obligations cover the work performed and the parts we supplied ourselves: if a pad or caliper installed by us misbehaves, diagnostics for the warranty case are free. Replacing VAZ brake pads with a customer-supplied part is also an option: you can bring your own linings, we install them and show you the old ones. But then the responsibility covers only the work, not the part. Excluded from coverage are accidents after the repair, third-party interference, and normal wear of consumables. When we supply the part, both the work and the part are under one responsibility — in a dispute you won't have to prove whose defect it is.
How to break in new pads and why they squeal after service
For the first while, new pads bed in to the disc — during this period it's best to avoid hard braking and long downhill descents. The lining doesn't yet contact the full surface, so braking efficiency is below normal, and overheating on a descent can glaze the surface and cause squealing. In city driving with frequent acceleration and braking, life runs out faster than on the highway: traffic lights, traffic jams, and short trips don't let the pad-disc pair cool evenly. Cheap linings on a Lada tend to squeal and dust more than OEM — saving on the part comes back as an earlier trip to the shop. Break them in gently at first, check lining thickness at every brake inspection — that way the pair beds in evenly and there's no squeal after service.
Lada brake pad replacement summary
Here's a quick summary of the key points on Lada pad replacement: when to replace, what affects how long the work takes, and what agreements are documented.
Wear threshold: pads on a Lada are replaced based on actual wear, and squealing and vibration more often point to the caliper than to the friction material itself.
Axle difference: front disc brakes are replaced sooner than rear drum brakes, and seized guide pins add time on either axle.
Disc decision: the question of "just the friction material or also the disc and caliper" is settled by disc thickness and runout before reassembly, not after.
Two warranties: the warranty on the work and the warranty on a customer-supplied part are different things, and both are recorded in the work order.
Break-in: new parts bed in at first, and in city traffic life runs out faster due to frequent braking.
11
Frequently asked questions about Lada brake pad replacement in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The cost of brake pad replacement for Lada at our service ranges from 5,000 to 6,000 tenge per axle (front or rear). The final price depends on the Lada model (Granta, Vesta, Largus, etc.), the type of brake system (disc or drum), and the complexity of access. For Lada with rear drum brakes, the work will be more expensive — around 6,000 tenge, as it requires removing the drums and adjusting the mechanism. The price may also slightly increase if additional diagnostics or replacement of related parts (sensors, dust boots) is needed. The exact cost can be found during an inspection or quoted over the phone after specifying the model and year of the car.
On average, Lada brake pad replacement takes from 40 minutes to 1.5 hours, depending on the mechanic's experience and the type of brake system. Front pads usually change faster — about 40-60 minutes, rear drum pads take longer, up to 1.5–2 hours, as the drums need to be removed and clearances adjusted. We have a comfortable waiting area with Wi-Fi, coffee, and fresh newspapers, so you can stay at the service and wait. If you plan to wait, we recommend booking in advance at a convenient time — this way you avoid queues and can plan your day.
Yes, we provide a warranty on all brake pad replacement work — 6 months or 10,000 km, whichever comes first. The warranty covers installation quality and brake system tightness (if no other interference occurred). If defects related to our work are found during the warranty period, we will fix them free of charge and replace parts if necessary. For the warranty, it is important to keep the receipt and follow the pad break-in rules. We are confident in our technicians and the quality of our work, so the warranty is our responsibility to the client.
It is advisable, but not required. You can come without an appointment, and we will find a slot during the day if the service load allows. However, during peak hours (evenings, weekends) there may be a queue, and the wait can reach 2-3 hours. To save your time, we recommend calling in advance and booking. It takes no more than 2 minutes: you tell us the Lada model and a convenient time, and we reserve a lift and a mechanic. Booking also allows us to quote the exact cost of work and give you a time estimate. Call us — and we will quickly find a slot.
Of course, you can bring your own pads and other parts (e.g., discs, drums, sensors). The labor price does not change — it is fixed for replacement. If you only need replacement with your own materials, the cost is the same: 5,000–6,000 tenge per axle. It is important that the parts are quality and suitable for your Lada model — if in doubt, we can check compatibility before starting work. Note that our warranty does not cover parts brought by the client, only the work. We can also offer our own pads from well-known brands with a warranty and often even cheaper than in stores — ask the administrator.
We take full responsibility for the quality of our work. If after replacement you notice squeaking, knocking, the car pulling to one side, or other issues related to installation, we will re-diagnose and fix the problem free of charge. In exceptional cases, if the pads were installed incorrectly and this led to damage, we will compensate the repair within the warranty. All work has a 6-month or 10,000 km warranty. We value our reputation, so our goal is for you to leave with properly functioning brakes. If a claim arises, just call us — and we will resolve it promptly.
We offer two options: pad replacement only and comprehensive replacement with caliper servicing. The first option is a quick replacement of brake pads with new ones without interfering with the mechanism; suitable if the calipers are in good condition and the pistons move freely. The second option is more in-depth work: we remove the calipers, clean and lubricate the guide pins, check the dust boots, and bleed the brakes if necessary. We recommend the second option if your Lada has over 60,000 km or you notice squeaking when braking. This way you extend the life of the new pads and avoid caliper problems. Exact prices are in the price list on this page.
After installing new pads, it is important to follow break-in rules for the first 200–300 km. Avoid sharp braking from high speeds — brake smoothly and gradually so the pads 'bed in' to the discs or drums. In the first 20–30 trips, try not to overload the car or tow trailers. This will create an even layer of friction material on the working surface and avoid vibrations or squeaks. It is also useful to check the brake fluid level after break-in and top it up if needed. If you feel the pedal has become soft or the pads heat up more than usual, come to us — we will check the brakes free of charge.
We accept payment in a way convenient for you: cash, bank cards (Visa, Mastercard, Homebank, and others), as well as transfers via Kaspi QR in the Kaspi.kz app. For legal entities, payment by bank transfer is possible with all necessary documents and a receipt. Payment is made after the work is completed and the warranty card is provided. We also participate in promotions and give small discounts for repeat visits — ask the administrator. No hidden fees — the final amount is fixed before work begins.
The base cost of pad replacement includes: removing the wheel, dismantling the old brake mechanism, cleaning the seating surfaces from dirt and rust, installing new pads, reassembly, bleeding the brake system (if necessary), and a test drive to check brake operation. We also check the condition of the brake discs/drums, brake fluid level, and caliper dust boots. If we find that the discs are worn (thickness below the minimum) or there are leaks, we inform you and coordinate additional repair — but that is at an extra cost. In any case, you receive a report on the brake condition and recommendations.
12
What Lada owners say about our brake pad work
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Sergey
Replaced front pads on my Priora. The mechanic showed me everything, the old pads were worn down to zero. He installed good ones, replaced them in an hour, I paid 12,000 tenge. Now the brakes are like new, no squeaking.
Aigerim
Recently had the rear pads replaced on my Lada Granta. The work was done quickly and with quality. The staff are polite, explained everything. The price was 15,000 tenge, ready in one day. I was satisfied.
Dmitry
On the Kalina there were rear drums, the pads were replaced. They took it in quickly, did everything in front of me, showed the wear. The price of 14,000 tenge for the work with materials turned out okay. It brakes perfectly, the hum is gone.
Marina
Vesta, front pad replacement. They scheduled me at a convenient time and did it in an hour. Excellent service, the guys are great. They installed normal pads, the brakes became crisp. Only 13,000 tenge.
Timur
On the Niva 4x4 I had the pads replaced. I liked that they checked the calipers and greased the guide pins. They did everything neatly, no complaints. The price is 11,500 tenge, quite acceptable.
Olga
Largus, rear pads replaced and handbrake adjusted. It was very convenient that I could watch the process. The mechanic explained that the old pads were completely worn out. The cost was 16,000 tenge, everything fast and high-quality.
Alexey
Priora, front pad replacement. They finished within the stated hour, gave a warranty. The price is 12,000 tenge. Now the braking is confident, no vibrations. Thanks!
Nurlan
Granta, the front pads were squeaking. They were replaced with new ones, I am completely satisfied. Everything was easy and fast, they showed the wear during diagnostics. I paid 12,500 tenge. I recommend this service.
Elena
Kalina, rear pad replacement. They did everything perfectly, the price was 15,000 tenge, took an hour and a half. The brakes became softer, no sounds at all. I was pleased, thanks to the mechanics!