We change wheels on passenger and commercial vehicles — quickly and carefully. We use professional equipment to avoid damaging the hub and fasteners. Precise balancing eliminates steering wheel vibration and high-speed shaking. Warranty on all work — 6 months.
Current prices for wheel replacement at the CARGID auto service. The exact cost depends on the type of wheel and the complexity of the work.
Service
Duration
Warranty
Price
Removal and installation of one wheel (when replacing a wheel)
30 minutes
6 mo
from 1 500 ₸
Balancing of one wheel (after installing a wheel)
30–40 minutes
6 mo
from 2 000 ₸
Replacement of one wheel (passenger car)
1 hour
6 mo
from 3 500 ₸
Replacement of two wheels on one axle
1–1.5 hours
6 mo
from 6 000 ₸
Full replacement of 4 wheels (passenger car)
2–3 hours
6 mo
from 10 000 ₸
Wheel replacement with tire transfer from the old to the new wheel
1–1.5 hours
6 mo
from 4 500 ₸
Wheel replacement with tire removal and installation (comprehensive)
2–3 hours
6 mo
from 12 000 ₸
Replacement with alloy wheels (with balancing, 4 pcs.)
2–3 hours
6 mo
from 15 000 ₸
Replacement with forged wheels (with balancing, 4 pcs.)
2–3 hours
6 mo
from 18 000 ₸
Wheel replacement on an SUV/crossover (4 pcs.)
3–4 hours
6 mo
from 15 000 ₸
Wheel replacement on commercial transport (4 pcs.)
3–4 hours
6 mo
from 20 000 ₸
Urgent replacement of one wheel (within 1 hour)
1 hour
6 mo
from 5 000 ₸
Urgent replacement of all wheels (same day)
2–3 hours
6 mo
from 15 000 ₸
On-site wheel replacement (with technician visit)
1–2 hours
6 mo
from 7 000 ₸
Wheel replacement with repair of the old one (straightening, alignment)
2–3 hours
6 mo
from 5 500 ₸
Wheel replacement with tire replacement (if the tire is damaged)
1–2 hours
6 mo
from 6 000 ₸
Wheel replacement with alignment check (camber adjustment)
3–4 hours
6 mo
from 25 000 ₸
Wheel replacement with brake pad replacement (related)
2–3 hours
6 mo
from 9 000 ₸
Wheel replacement with hub cleaning and anti-corrosion treatment
1.5–2 hours
6 mo
from 4 000 ₸
Prices are indicated excluding the cost of spare parts. The exact cost of work will be determined by the technician after inspecting the vehicle. A discount is possible for comprehensive replacement. Warranty periods — see the page «Warranty»
06
Why Choose Rim Replacement at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
6MO
warranty on labor — the term is stated in the work order.
Passenger tire service
Commercial tire service
On-site service in the city
01
We Clean the Hub to Metal
We remove rust and dirt from the hub with a metal brush before installation. Otherwise, the rim will sit crooked and cause vibration at speed.
02
Centering at 4 Points
We place the rim on the hub and start the bolts in a crisscross pattern, tightening gradually. We measure runout along the edge — misalignment is visible immediately before final tightening.
03
We Work in 40 Minutes
Replacing one rim with mounting and balancing takes about 40 minutes. Two rims on one axle takes a bit longer; we swap the tire onto the same rim.
04
6-month Warranty on Fitment
If the rim sits with runout due to our installation, we will reinstall it free of charge within a year. There is no warranty on the rim itself; it is your part.
07
Rim Replacement in Almaty: from Request to Departure
Steps.
We explain step by step how rim replacement is carried out at our car service.
01
Inspection and Diagnostics
You leave a request or call us — we find a convenient time for your visit. On the lift, we check the condition of the rims, hubs, and fasteners — ruling out hidden issues.
request on WhatsApp
02
Wheel Removal
We carefully remove the old rims without damaging the threads or tires.
inspection and diagnostics
03
Selection of New Rims
We offer options based on parameters (diameter, offset, PCD) and your budget.
estimate before work starts
04
Wheel Balancing
We install the new rims and perform balancing to eliminate vibrations.
work to factory procedure
05
Installation on the Car
We fasten the wheels with the correct torque and check centering.
result check
06
Handover and Warranty
We check bolt tightness, tire pressure, and absence of play. We return the car, provide a warranty on the work, and give rim care recommendations.
CARGID replaces wheels in Almaty at 129 Mukagali Makataev St.: we remove the old wheel, clean the hub down to bare metal, center it at 4 points, balance the wheel and torque the fasteners to spec. One wheel with mounting and balancing takes about 40 minutes, and the work comes with a 6-month warranty on the work order.
Wheel or brake disc — which one we're actually replacing
People search "wheel replacement" with different jobs in mind: one needs a wheel, another a brake disc. We draw the line right away so you don't end up in the wrong place or book the wrong job.
How a wheel differs from a brake disc
A wheel is the part the tire mounts on and that bolts to the hub; a brake disc is part of the braking system and has nothing to do with the wheel. The rim holds the tire, takes hits from the road and passes the load through the hub to the suspension. The brake disc is clamped by the caliper: the pads rub against its surface and slow you down. One is visible from outside and gets replaced during tire service, the other is hidden behind the wheel and belongs to the brakes. Their wear signs are different too: on a wheel it's a dent in the rim, a crack, a mark from an impact; on a brake disc it's grooves, a lip, overheating. If you get vibration when braking rather than at speed after installing a new wheel, the cause is in the braking system, not in how the wheel seated. Wheel replacement in Almaty is a job we do with a runout check along the rim edge.
How to tell your wheel is bent and it's time to replace it
Steering wheel shake at speed: the vibration shows up between 60–90 km/h and gets worse under acceleration — a straight rim doesn't behave like that.
Uneven tire wear: the tread wears in patches or on one side even though the pressure is fine and the alignment isn't off.
Knocking on small bumps: a dull sound from the wheel over seams and cracks in the asphalt that wasn't there before.
Visible rim deformation: a dent on the flange, a crack near a spoke or a mark from a hard impact — a check with a flashlight takes a minute.
Runout won't go away after balancing: weights compensate for weight, not geometry — repeat imbalance on the same wheel points to the wheel itself.
The car pulls to one side: it drifts off a straight line on flat asphalt even though the alignment was checked on the stand.
Crooked seating: the wheel sat unevenly on a rusty hub — we check runout along the edge before the final torque.
How the replacement goes and why there won't be any vibration
Vibration after a replacement is the most common complaint, and almost always the cause is how the wheel seated, not the part itself. Here are the steps where we prevent it.
Cleaning the hub and centering at 4 points
We clean the hub down to bare metal with a wire brush and thread the wheel on crosswise at 4 points, tightening gradually — that way it seats straight with no tilt. Rust and dirt on the mounting surface leave a gap of a fraction of a millimeter, which is enough to cause vibration above 90 km/h. We torque the fasteners in two or three passes with a torque wrench, not with an impact gun by feel: an overtorqued bolt warps the rim and strips the threads in the hub. In our practice, wheel replacement starts with exactly this prep — the whole seating geometry depends on it. After brushing, we treat the hub with an anti-corrosion compound so the next visit doesn't start with the same rust. If the wheel is seized to the hub, you can't knock it off with a sledgehammer — that deforms the mounting surface, and the vibration will show up on the new part.
Measuring runout and balancing after installation
Before the final torque we measure the deviation along the rim edge, and after installation we balance each wheel — a tilt shows up right away, while the fasteners aren't fully tightened yet. The gauge shows the offset along the rim, and if it's out of tolerance, we take the wheel off and reseat it before the owner even complains. The balancing machine splits the weight across two planes, and we attach the weights to the inner flange so the look of the alloy isn't spoiled. In our work, runout and imbalance are different faults and shouldn't be confused: the first is fixed by seating, the second by weights. We reseat right on the lift while the car is up — no need to remount the tire for that. Balancing doesn't fix crooked seating — if the wheel went on crooked, the weights only mask the problem until the first pothole.
One wheel or a pair per axle, swap the tire over or buy a new one
The customer decides the scope of work and what happens to the tire. Here are the options and the logic behind the choice, so your decision on wheel replacement is your own, not something a technician talked you into.
When to replace one wheel and when to replace a pair per axle
Local damage: a crack, a bad dent or stripped threads on one wheel — we replace only that one and leave the rest alone.
Uneven wear: if the two wheels on one axle are worn differently, we install a pair, otherwise the car's behavior changes.
After an impact: if one wheel is deformed, we check the one next to it on the same side — hidden runout will show up later.
Different types: steel and alloy side by side give different stiffness — we either move such a pair to different sides or replace them.
Fastener problem: stripped studs or wallowed-out holes are a reason to replace the wheel, not to retighten the fasteners.
Swap the tire from the old wheel or buy a new one
We swap the tire over when it's intact and has decent tread — that's cheaper than buying a new one and takes the same 40 minutes including balancing. We take the tire off the old rim, inspect the bead seat and sidewalls, then mount it on the new wheel and balance it on the machine. If the tire is more than 5–6 years old or has a bulge on the sidewall, swapping it onto a new rim will only delay the replacement — the rubber no longer holds the load, and it's better to replace it right away. Measuring runout along the edge after mounting shows whether the wheel seated straight: a tilt is visible before the final torque. In our experience, a swap makes sense on tires with 4 mm of tread or more — on bald rubber the savings turn into another visit.
Choosing a wheel by PCD, ET and center bore
The main fear when buying new wheels is that they "won't fit" or will wobble. Here are the specs compatibility is checked against, and what actually affects how the wheel seats.
Three specs that make a wheel fit your car
compatibility specs for a new wheel and the car
Spec
What it means
How we check it
PCD
Bolt pattern, number and diameter of holes
Matches the factory one
ET
Offset, distance from the hub to the rim
Deviation no more than 5 mm
Center bore
Diameter of the center hole
Matches or is closed with a ring
Rim width
Seat for the tire
Within tolerance for the tire width
Alloy or forged wheels instead of steel
We fit alloy and forged wheels with balancing at the stock mounting points — when PCD, ET and the hub bore match, the suspension doesn't suffer. Before mounting, we check every wheel for runout along the edge, then balance it on the machine and center it crosswise at four points, and we clean the hub down to bare metal — otherwise the seat will go on crooked. A forged wheel is lighter than an alloy one at the same strength: less unsprung mass, sharper response over bumps, but it also costs more. Around town the difference in behavior is barely noticeable, while alloy wins on the choice of designs. Steel wheels are more often swapped for alloy for looks and corrosion resistance — steel bends more easily but rusts faster. Selecting and fitting wheels takes us about 40 minutes per wheel including mounting and balancing, the warranty on the work is 6 months, and we record the term in the work order.
Timing, urgency and warranty on the work
Timing and warranty terms are what the final decision to book comes down to. We show real work scenarios and exactly what the replacement warranty covers.
How long replacement takes by scenario
Replacing one wheel with mounting and balancing takes us about 40 minutes. Two wheels on the same axle take a little longer: we move the tire onto the same rim, which adds dismounting and rebalancing. We handle a full set of four wheels by appointment within the day, and with six lifts the queue doesn't build up. Urgent work within an hour is realistic only if the wheel and tire are already selected — otherwise the time goes into matching PCD and ET specs, not the operation itself. On SUVs and commercial vehicles, add time for lifting and removing heavy wheels. Come at opening — the lifts are freer in the first half of the shift, and you pick up the car the same day without waiting.
Your own wheels, warranty and what if something's off
We accept the customer's wheels and tires, give a 6-month warranty on the replacement, and record the term and conditions in the work order and the completion certificate. For the key steps — cleaning the hub, centering at 4 points, measuring runout — we take a photo report so that after handover it's clear exactly what was changed. We show the old parts and give them back to the owner. The coverage does not extend to a part brought in by the customer or to natural wear of consumables — this is written into the certificate so there are no discrepancies when you come back. Diagnostics for a warranty case are free, and we do a test drive before handover. If vibration shows up at speed, come back with the work order and we'll sort it out by the documents, no arguments. Before work starts, the service advisor records the scope in the work order, and when it's done you get the certificate with the warranty terms in hand.
Wheel Replacement Key Factors
The result comes down to three things: accurate diagnostics, careful installation without misalignment, and warranty terms put in writing before work starts.
Different parts: a wheel and a brake disc are not the same thing; when people ask about replacement, it's almost always the wheel.
Protection from vibration: cleaning the hub to bare metal, centering at 4 points and measuring runout before the final torque remove misalignment.
One or a pair: a local defect is fixed with one part, uneven wear across an axle with two; a whole tire no older than 5–6 years is moved onto a new wheel.
Compatibility: selection and fitting rest on three parameters — PCD, ET and the hub bore; an ET deviation over 5 mm loads the suspension.
Timing and warranty: one wheel with mounting and balancing takes about 40 minutes, the warranty on the work is 6 months, and the terms are written into the work order.
10
Frequently asked questions about wheel replacement in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The cost of wheel replacement at CARGID depends on the type of wheel (steel, alloy, forged) and the complexity of the work. Basic replacement of one wheel (remove the old one, install the new one) costs from 3,500 tenge per wheel. This price includes balancing and checking the mounting bolts. Full replacement of a set of four wheels, including removal and installation of each wheel, is from 10,000 tenge. The final cost is confirmed after inspecting the vehicle. Exact prices are in the price list on this page.
Usually, replacing all four wheels takes from 1.5 to 2 hours. If the wheels are simply swapped from one set of tires to another, the work takes about an hour. The time may increase if the bolts or nuts are rusted and stuck to the hub — then additional time is needed to treat them with special products. The duration is also affected by the need to transfer tire pressure sensors: this takes an additional 20-30 minutes. In any case, the exact time will be given to you by the mechanic when you book, based on the specifics of your car.
The warranty covers the correct installation of the wheel on the hub and the tightening torque of the wheel bolts. If vibration occurs after replacement due to insufficient cleaning of the mounting surface or misalignment during installation, we will redo the work. The warranty does not cover defects in the wheels themselves, tires, or wear of hub components. The warranty period is 14 days from the moment the vehicle is returned.
We recommend booking in advance, especially during tire change season (spring and autumn), when the workload is at its highest. If you come without a booking, we can only accept you if there is free space — usually the wait is from 1 to 3 hours. You can book by phone, via WhatsApp, or on the website. When booking, specify the make and model of the car, the type of wheels, and the desired time. If you have an urgent situation, for example, a wheel cracked on the road, call us — we will try to find a slot within an hour.
Yes, of course, you can bring your own wheels and tires. Installation of wheels not purchased from us does not differ in price from installation of those purchased in our store. The main thing is that the wheels fit your car in size, offset, hub diameter, and bolt holes. If you are unsure about compatibility, before installation the mechanics will check the fit and, if necessary, select adapter rings (spacers). The cost of the service will not change. When accepting the wheels, their external condition is recorded to exclude claims regarding scratches or dents.
If after replacement you notice vibration at speed, unusual knocking, or other problems, return to the service immediately. We will perform diagnostics for free. If a defect in our work is found, for example, bolts not tightened correctly or the wheel not centered, we will fix the issue at our own expense. If the problem is caused by a manufacturing defect of the wheel, we will help file a warranty claim with the manufacturer. It is important not to delay: if you continue driving, it may worsen the problem and lead to serious damage.
The price depends on the complexity and scope of work. The most budget option is replacing one wheel, for example, after damage: remove the wheel, balance it, install it back. This costs from 5,000 tenge. Full replacement of four wheels with tire swapping will cost from 12,000 tenge. The price is also affected by wheel diameter: for R18+ wheels there is a 10-15% surcharge on the work cost. Exact prices are in the price list on this page.
In the first 50-100 km after replacement, I recommend driving in a calm mode, then check the tightening of the wheel bolts — they may loosen slightly due to settling of the parts. Regularly wash the wheels from dirt and road chemicals, especially in winter, as they destroy the coating and cause corrosion. Use neutral cleaning products and soft brushes. During seasonal tire changes, check the condition of the wheels for cracks and deformations. Do not forget to rebalance the wheels once a year, as imbalance leads to vibration and accelerates suspension wear.
We accept cash, card payment via terminal, and bank transfer. The final cost depends on the number of wheels, the type of mounting, the need for wheel balancing, and removal/installation of pressure sensors. If the wheel is stuck to the hub, additional work to remove it is added. We give the exact amount after inspecting the vehicle before starting work.
We work with cars of all makes, including those with non-standard wheel sizes (for example, R19+ or factory wheels with non-standard offset). The main thing is that the new wheels exactly match your car's parameters: mounting diameter, rim width, offset (ET), bolt pattern, and center bore diameter. If you are unsure about the parameters, come to us for diagnostics — the mechanics will take measurements and select suitable options. If necessary, we will install centering rings to eliminate play and vibration.
11
What clients say about our wheel replacement
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Aigerim
Toyota Camry
I changed the wheels on my Toyota Camry. I arrived in the morning, they did it in an hour, everything was spot on. The new alloy wheels looked great, the car is like new. The price was 65000 tenge, reasonable. Thanks for the work!
Dmitry
I came in because of steering wheel vibration. The service quickly found the issue — the wheels were bent. They replaced them with new ones and balanced them. Total: 45000 tenge, one day. The car drives perfectly. I recommend!
Sanzhar
I replaced the wheels on my Niva. The work was fast and high-quality. The old wheels were completely worn out; they installed new ones and balanced them. 20000 tenge, one hour. Thanks!
Mikhail
BMW X5
Replaced wheels on my BMW X5. The service was fast, workers know their stuff. Recommended new alloy wheels, price 85000 tenge. No more shaking, all good. Thanks!
Elena
Solaris
I had winter wheels installed on my Hyundai Solaris. Everything was done neatly: they removed the old ones, installed the new ones, and even inflated them. I paid 30000 tenge. Thank you, I will come again!
Alexey
I changed wheels on my Mazda 6. Everything was fine, they selected wheels for my car and installed them quickly. It cost 60000 tenge, but the quality is top. I recommend this service.
Nurzhan
Land Cruiser
I changed the wheels on my Toyota Land Cruiser. The old ones had a crack; the service selected new ones and installed them in half a day. 80000 tenge. Now there is no shaking. Thanks to the mechanics!
Olga
Sportage
I ordered wheel replacement for my Kia Sportage. Very satisfied. Everything was fast and high-quality; they picked out beautiful wheels. The price was 55000 tenge. Now the car looks stylish.
Vladimir
I bought wheels from them and had them replaced at the same time. The work was excellent; the old wheel was damaged, they installed a new one. Only 40000 tenge, done in an hour. I recommend.