

Toyota Camry: Rusty Wheels
- Cause
- The wheels were very rusty after winter use.
- Found
- A layer of rust covered the entire surface, with paint blistering in places.
- Done
- Sandblasting, body filler, primer, 2-coat paint, polishing.

Sandblasting completely removes rust, old paint, and scale from wheels, preparing them for painting or powder coating. We work with all types of wheels: stamped, cast, forged. We handle the surface carefully, without overheating the metal. 6-month warranty on the result.
Full cycle: from wheel cleaning to mounting the wheel on the car

We treat the wheel with abrasive under pressure. We remove rust, old paint and dirt down to bare metal.

Sandblasting and painting of all four wheels in a single visit. The client gets an even coating and a refreshed look for the wheels.

We straighten the wheel geometry on a stand, eliminate runout and wobble. We bring the mounting surface back to norm.

We remove the wheel from the car, and after the work we put it back and tighten the fasteners to the correct torque.

We remove the tire on the machine and put it back after working on the wheel. We keep an eye on the edges and the fit.

We check the wheel on a balancing machine and install weights. We eliminate vibration at speed.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
Real jobs from our clients: you can see how we remove rust and make wheels look new again.
The exact cost will be calculated after inspection, it depends on the condition of the wheels and their quantity.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Sandblasting of 1 wheel (R13) | 30 min | 6 mo | from 2,000 ₸ |
| Sandblasting of 1 wheel (R14) | 30 min | 6 mo | from 2,000 ₸ |
| Sandblasting of 1 wheel (R15) | 40 min | 6 mo | from 2,500 ₸ |
| Sandblasting of 1 wheel (R16) | 40 min | 6 mo | from 2,500 ₸ |
| Sandblasting of 1 wheel (R17) | 50 min | 6 mo | from 3,000 ₸ |
| Sandblasting of 1 wheel (R18) | 1 hour | 6 mo | from 3,500 ₸ |
| Sandblasting of 1 wheel (R19) | 1 hour | 6 mo | from 4,000 ₸ |
| Sandblasting of 1 wheel (R20) | 1 hour 15 min | 6 mo | from 4,500 ₸ |
| Sandblasting of 1 wheel (R21+) | 1.5 hours | 6 mo | from 5,000 ₸ |
| Sandblasting of 1 truck wheel | 2 hours | 6 mo | from 7,000 ₸ |
| Sandblasting of 1 wheel with painting (R14) | 2–3 hours | 6 mo | from 8,000 ₸ |
| Sandblasting of 1 wheel with painting (R16) | 2–3 hours | 6 mo | from 9,000 ₸ |
| Sandblasting of 1 wheel with powder coating | 2–3 days | 6 mo | from 10,000 ₸ |
| Complex: sandblasting + painting of 4 wheels | 1–2 days | 6 mo | from 35,000 ₸ |
| Wheel removal/installation | 30 min | 6 mo | from 1,000 ₸ |
| Tire removal/installation | 30 min | 6 mo | from 2,000 ₸ |
| Wheel balancing | 20 min | 6 mo | from 1,500 ₸ |
| Wheel straightening (per 1 wheel) | 1 hour | 6 mo | from 3,000 ₸ |
Prices are per 1 wheel unless otherwise stated. The final cost depends on the condition of the wheel and the chosen coating. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
First we correct the geometry on the stand, then we clean. If you blast sand at a bent wheel, the defects will only be masked.
We go over with abrasive twice: the first removes paint and dirt, the second evens out the surface. One pass leaves spots and rust.
We assemble the wheel and check it on the machine to within 5 grams. Without this, imbalance will cause vibration at 80–100 km/h.
If the coating blisters or rust appears due to our fault, we will redo that area. Tires and straightening are not covered.
6 steps from request to finished wheels that look like new.

You submit a request on the website or by phone, and we find a convenient time. The technician assesses the condition of the wheels, determines the paint thickness and the degree of contamination.
request on WhatsApp
We remove the tires from the wheels so that the entire surface can be treated without interference.
inspection and diagnosticsThe wheels are treated with a sandblasting machine, removing rust, old paint and dirt.
estimate before work starts
Small chips and scratches are filled, then the wheels are primed for protection.
work to factory procedureWe apply powder paint in two layers in a special chamber for durability.
result check
After painting, the wheels are polished and dried in an oven at the optimal temperature. We balance the wheels, install the tires and hand over the wheels with a warranty.
warranty in the work orderWalk-ins welcome. By appointment — no queue.

Write to WhatsApp with the make, year and what's bothering you. We'll tell you the cause, a price estimate and pick a time for your visit.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

CARGID performs wheel sandblasting in Almaty following the chain: straightening → two abrasive passes → primer → painting → balancing to within 5 grams. First, a written estimate and photo report for each stage, 6-month warranty per work order. Open daily 09:00–20:00, by appointment with no waiting.
Sandblasting is abrasive cleaning of a wheel from old paint, rust, and dirt. We explain how this method differs from chemical and mechanical cleaning, which wheels it suits, and when restoration no longer makes sense.
Abrasive treatment removes coating and rust down to bare metal, whereas chemicals only work on the surface, and mechanical cleaning leaves pockets of corrosion in pores and chips. Chemical strippers soften the paint layer but don't penetrate deep into pits; a brush and sandpaper remove what's visible, but an oxide film remains in microcracks. A pressurized stream blasts corrosion products out of pores and chips, exposing a uniform surface across the entire area — including the inner part of the rim and the bead seat. If corrosion has already started under the paint, surface washing and a brush will only mask it: the blistering will return in a season, so cleaning is done down to metal, not "to visible cleanliness." The abrasive reaches the bead seat and rim edge where a brush physically can't, and that's exactly where corrosion most often hides.
Color mismatch and rust spots are the owner's main fear before sandblasting. Spots don't come from the abrasive but from the order of operations. We explain the chain where each step addresses the cause of the defect rather than masking it.
We first straighten the geometry on a stand and only then clean: if you sandblast a bent wheel, the defects will only be masked under a layer of paint. Wheel straightening returns the mounting surface and rim to their original shape, and the abrasive removes old coating from an already even surface. Bending doesn't show up immediately but as vibration at 80–100 km/h and uneven tire wear. Moreover, redoing paint after geometry correction is more expensive than doing everything in one go: the new coating will have to be stripped again. That's why straightening before cleaning saves both a return visit and nerves. We consider this order — shape first, then cleanliness and color — the right one. A bent wheel with a smooth fresh clear coat will still give itself away through the steering wheel on the highway. This approach to wheel sandblasting in Almaty explains why we don't take on cleaning before geometry correction.
We go over with abrasive twice: the first pass removes paint and dirt, the second levels the surface — a single pass leaves spots and rust. The first pass removes the bulk of the old coating and ingrained dirt, the second levels the microrelief and finishes off remnants in the recesses between spokes. Immediately after cleaning, the metal is degreased and primed to keep it from "breathing in" moisture: if you leave the wheel bare overnight, by morning a film will appear again and paint adhesion will drop. In our practice, two-pass wheel treatment takes longer, but that's what gives an even, uniform tone without spots. Primer is applied within half an hour of finishing cleaning — this is what maintains the adhesion of the paint layer.
We mount the wheel and check it on the machine to within 5 grams — without this, the imbalance will cause vibration at 80–100 km/h. The balancing machine shows where weight is missing, and the technician places weights on the rim to the nearest gram. Even a perfectly painted wheel can "drift" in weight during tire mounting because the tire doesn't seat evenly on the rim, so the check is done on the assembled wheel, not on a bare rim. Balancing is the final link in the chain: cleaning, straightening, painting and tire mounting all come together at one inspection point. Before handing over the car, the service advisor takes it for a test drive and confirms there's no vibration. Without this step, even a carefully painted wheel will come back to you with a complaint about steering wheel shake.
Sandblasting and painting are two services that make sense to knock out in one visit. Here's what's included in the package for four wheels and how powder coating differs from liquid paint.
| Parameter | Liquid paint | Powder coating |
|---|---|---|
| Chip resistance | Moderate, the clear coat helps | High |
| Color accuracy | Matches the factory shade | Limited to the palette |
| Drying | Faster, in the booth | Baked in an oven |
| When it's chosen | Restoration to the original color | Winter, road chemicals, gravel |
Here's how long the work takes, whether you need to book in advance, and whether you can drop off the wheels separately from the car if you need it every day.
We're open daily 09:00–20:00 by appointment with no waiting in line: the technician gives you the exact timeline after inspecting the wheels, because it depends on the condition of the coating and the depth of corrosion. The car is received by the service advisor, who also manages the work order through to handover. In practice, processing goes faster when the tire is removed in advance and no time is wasted masking the rubber. It's best to book a couple of days ahead — during tire-change season, showing up without a slot means waiting for a free lift. With a booking, the car is accepted at the scheduled time, not "when we get to it." It's better to book ahead: during tire-change season there are fewer open slots, and with an appointment the car is accepted at the scheduled time with no waiting in line.
Yes, you can bring the wheels separately from the car — we accept them, inspect them and put together a written estimate before any work starts. This format is handy when a set of winter tires is sitting in the garage and you need the car every day. The removed wheels go through cleaning and painting without being tied to the vehicle, and tire mounting and balancing are done on the wheels themselves. The test drive before handover is done after the set is installed on the car — keep that in mind when planning to pick up your order. If you're bringing in wheels already mounted, tell us when you book: we'll include tire removal in the estimate up front, and you won't run into an extra line item on the work order. The service advisor manages the work order from intake to handover, so when you pick up, you get exactly your own set.
Here's how long the warranty on wheel sandblasting lasts, which cases fall outside our obligations, and how an estimate with a photo report takes away the fear of rework.
We start with diagnostics and put together a written estimate, and only begin processing after the customer agrees — we take a photo report at the key stages. The estimate shows every line item: cleaning, geometry straightening, primer, painting and wheel assembly — so the owner knows up front what they're paying for, with no surprises at pickup. This approach takes away the main fear of "they'll overcharge and do a sloppy job": the photo report shows what the wheel looked like before cleaning and what it became after primer and paint, so you don't have to take our word for it. The service advisor manages the work order from intake to finish and shows every stage — so the owner sees what they're paying for. We do the photo report at key stages by default — it shows what the wheel looked like before cleaning and what it became after primer and paint.
Here's the key stuff to keep in mind before you book: what the result depends on, what the package includes, and what the warranty covers.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost of sandblasting one wheel at CARGID is from 2 000 to 5 000 tenge. The final price depends on the wheel size (R13–R22), the degree of contamination and corrosion, as well as the type of coating (paint, powder coating). For an accurate estimate, a visual inspection of the wheels is necessary — it is free. The price includes removal and installation of the wheels if you leave the car with us.
On average, processing one wheel takes from 30 to 60 minutes. If additionally a thick layer of paint or deep corrosion needs to be removed, the time may increase to 90 minutes per wheel. Usually we do all 4 wheels in one day. If necessary, we can perform the service urgently in 3-4 hours, but it will cost 20% more than the base price.
Yes, we provide a 6-month warranty on the work performed. The warranty covers the quality of surface cleaning from corrosion and old coatings, as well as the absence of mechanical damage to the wheel during processing (dents, scratches from the abrasive). If after the service you find any defects related to our work, we will fix them free of charge.
An appointment is desirable, as it allows planning the master's workload and avoiding waiting. You can book by phone or via WhatsApp, choosing a convenient time. In urgent cases, we try to accept without an appointment, but then there may be a queue. If you come without an appointment, we will inspect the wheels and tell you the approximate waiting time — usually no more than an hour.
Yes, you can bring the wheels separately, without the car. In this case, the price will be 10% lower, since removal and installation are not required. For safe storage and identification, we recommend signing each wheel or attaching a note. Wheels are accepted only clean of dirt and snow. You can pick up the finished wheels within 3 working days after the work is completed.
Such situations are extremely rare, but if they happen, we bear full responsibility. Upon acceptance of the wheels, we conduct a visual inspection and record the condition in a report. If during sandblasting hidden defects are revealed (cracks, severe corrosion that could lead to destruction), we immediately stop the work and inform you. If through our fault the wheel was damaged, we compensate its cost or restore it free of charge.
Sandblasting is abrasive surface treatment with compressed air and particles of sand or another abrasive. It effectively removes rust, old paint and scale, while not distorting the wheel geometry. Unlike chemical cleaning, it does not leave harmful substances and does not require long drying. Mechanical cleaning (brushes, grinder) can leave scratches and copes worse with hard-to-reach places. Sandblasting gives a perfectly clean surface, ready for painting or powder coating.
Immediately after sandblasting, the wheel surface remains bare and prone to corrosion, so within a few hours it needs to be coated with a protective compound: primer, paint or powder coating. If you plan to paint later, store the wheels in a dry room and treat with anti-corrosion grease. In the future, regularly wash the wheels without aggressive acids, protect from impacts and scratches. If these conditions are met, the coating will last at least 2-3 years.
Payment is accepted in cash, by card and by transfer; for legal entities, bank transfer is possible. The cost of wheel sandblasting consists of the number of wheels, their diameter, the degree of contamination and corrosion, as well as the need for additional processing — priming or powder painting. The exact amount is announced after inspecting the wheels before starting work.
Yes, we offer a comprehensive service: sandblasting + wheel painting (liquid paint or powder coating). Powder coating is more durable and resistant to chips, its price is from 10 000 tenge per wheel depending on complexity. If you only need sandblasting, we will do it, and you can have the painting done anywhere else. But we recommend doing it with us — then the warranty will cover everything comprehensively.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
I brought my Toyota Camry with terribly rusty wheels. I thought I would have to replace them, but the guys did sandblasting and painted them — like new! I paid 25 000 tenge, they returned it in a day. Balancing was done for free. Very satisfied, will recommend.
I took a BMW X5, there were scratches on the wheels from parking. I booked at CARGID, the master examined everything, said it needed puttying. They did it for 28 000 tenge, matched the color perfectly, now you can't tell from new. Thanks for the quality!
On the Kia Sportage after painting at another place, drips remained. Here they re-sandblasted everything, painted it properly. 26 000 tenge, took a day. The car began to look better than it was. Thanks for your patience with my questions.
Mercedes E-Class, corrosion on the inside of the wheels. The guys did anti-corrosion treatment, painted, drying in the oven. The result is excellent, not a single rust spot. 30 000 tenge for such work — fine.
Volkswagen Polo, the entire face of the wheels was chipped from stones on the highway. I thought they wouldn't repair it without replacement. They puttied it, painted it in the factory color, it became better than the original. 24 000 tenge, done quickly. Thanks!
Audi A6 after winter in terrible condition: salt and reagents had eaten away all the wheels. At CARGID they did sandblasting, painting and a protective coating. Now they are like from the showroom. 32 000 tenge — worth it. Thanks for saving my wheels!
In winter, bubbles appeared on the wheels from reagents, I thought only replacement. I turned here — they did sandblasting, priming, painting. Everything was done honestly, they gave a warranty. I paid 27 000 tenge, they returned it in a day. Thanks, I will recommend.
Қызметтеріңізге рахмет! Дискілерімді тазартты, бояды, енді жаңа сияқты. Бағасы 25 000 теңге, бір күнде жасап берді. Өте ризамын, тағы келемін.
I brought my rims for sandblasting, there was a lot of rust. They did it in one day, the painting is quality, the design became like new. I paid 24,000 tenge. I recommend to everyone!
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.