

Case No. 1 — Restoration after hitting a pothole
- Cause
- The client hit a pothole and damaged two rims
- Found
- The rims had deformation on the inner side, one tire was damaged
- Done
- Both rims were straightened, balancing was performed

We restore rim geometry without risking the metal. We roll steel and alloy rims, remove dents and «figure eights». We work on a professional machine, following the technology. Average turnaround — 30–40 minutes, price depends on complexity.
What the service includes: we straighten rim geometry on a machine, with heating and welding if necessary.

We roll the disc on a machine and restore its factory geometry. The client receives a straight rim without runout.

We heat the deformed area and straighten it, weld cracks with argon. The disc holds its shape and pressure again.

We remove radial runout when the disc spins with skew. The client gets smooth rotation without steering vibration.

We correct axial displacement of the rim that causes the disc to rub and pull to the side. We restore proper wheel fitment.

We straighten the bent rim edge after hitting a curb. The disc fits the tire again without air leaks.

We remove the tire, straighten the disc, and put the wheel back. The client gets a repaired disc and an assembled wheel.

We straighten all four discs as a set so the geometry is uniform. The client gets a straight set without vibrations.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
Examples of restoring various types of rims are shown.
We straighten dents, eliminate the "figure-eight" and radial runout. Estimated cost of work is in the table below.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Diagnostics and inspection of the wheel (without repair) | 15–20 minutes | 6 mo | Free |
| Wheel straightening R13–R14 | 30–40 minutes | 6 mo | from 2 500 ₸ |
| Wheel straightening R15–R16 | 40–60 minutes | 6 mo | from 3 500 ₸ |
| Wheel straightening R17–R18 | 1–1.5 hours | 6 mo | from 5 000 ₸ |
| Wheel straightening R19–R20 | 1.5–2 hours | 6 mo | from 7 000 ₸ |
| Wheel straightening R21 and above | from 2 hours | 6 mo | from 9 000 ₸ |
| Elimination of "figure-eight" (radial runout) | 1–2 hours | 6 mo | from 4 000 ₸ |
| Elimination of lateral runout | 1–2 hours | 6 mo | from 4 000 ₸ |
| Straightening of rim crease (up to 5 cm) | 1–2 hours | 6 mo | from 5 000 ₸ |
| Straightening of rim crease (over 5 cm) | from 2 hours | 6 mo | from 8 000 ₸ |
| Straightening with heating (argon welding) | 2–3 hours | 6 mo | from 12 000 ₸ |
| Urgent straightening (waiting on site) | 1–2 hours (priority) | 6 mo | from 6 000 ₸ |
| On-site visit to the client (Almaty) | 1–2 hours + travel | 6 mo | from 10 000 ₸ |
| On-site visit outside the city (up to 50 km from Almaty) | from 2 hours + travel | 6 mo | from 15 000 ₸ |
| Straightening of alloy wheel (color painting) | 2–3 hours | 6 mo | from 8 000 ₸ |
| Straightening of stamped wheel | 1–2 hours | 6 mo | from 3 500 ₸ |
| Straightening of forged wheel | 2–3 hours | 6 mo | from 10 000 ₸ |
| Wheel repair with tire replacement (removal/installation) | 1–2 hours | 6 mo | from 5 000 ₸ |
| Comprehensive straightening of 4 wheels | 2–3 hours | 6 mo | from 10 000 ₸ |
The exact cost depends on the condition of the wheel and the type of damage. Prices are indicated without taking into account the cost of consumables. Warranty for all work. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We heat the disc evenly, not locally. The metal does not crack, and the figure eight disappears without weakening.
We measure with an indicator after rolling. If more — we straighten again to factory tolerance.
We do it in one visit. You do not need to leave the car for a day for seasonal straightening.
If the disc deforms again due to our fault — we will redo it for free. We cover geometry, not the coating.
We perform a full cycle of work — from inspection to control check.

You leave a request on the website or by phone, we select a convenient time for your visit. The master evaluates the condition of the discs, the degree of deformation, and determines the possibility of rolling.
request on WhatsApp
We carefully remove the wheels, mark them so as not to mix up the positions.
inspection and diagnosticsWe use a professional rolling machine to restore the disc's geometry.
estimate before work starts
We monitor the disc parameters using precise measuring equipment.
work to factory procedureWe balance the assembled wheel to eliminate vibrations and extend tire life.
result check
We install the wheels back in place, tighten the bolts with the correct torque. We check tire pressure and give recommendations for further use.
warranty in the work orderWalk-ins welcome. By appointment — no queue.

Write to WhatsApp with the make, year and what's bothering you. We'll tell you the cause, a price estimate and pick a time for your visit.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

CARGID does rim rolling in Almaty with our own technicians: we heat the rim evenly to 250 °C and straighten it to no more than 0.2 mm of runout. A set of four wheels takes 3 hours in a single visit, and we put the 6-month warranty in the work order. First diagnostics and a written estimate, then the work.
In tire work, the word "rolling" means two different things: restoring the geometry of a rim bent by a hit, and a tuning job that widens the rim for wider tires. Our service is the first one.
Rim restoration means bringing the geometry back after a hit, not widening the rim for wider tires; straightening is the general term for both. In this operation the technician returns the lip to its factory profile: pulls out the dent, removes lateral runout and the "figure-eight," and checks the result with a dial gauge. Tuning widening is a different job: the metal is cut, a strip is welded in, and the offset is changed so a wider-than-stock tire fits. That modification changes the load on the suspension and requires calculations, and it has nothing to do with a restoration job. Rim rolling in Almaty solves exactly the restoration task. We do this work with our own technicians and bring the shape back to factory tolerance without changing the width. If a shop starts the conversation with "we'll widen the rim," you're in the wrong place — runout from a pothole needs the geometry straightened to factory tolerance.
There are only two key numbers in our work — heating to 250 °C and a 0.2 mm tolerance. Any other numbers in a conversation about straightening usually mean the technician is improvising.
We heat the rim evenly to 250 °C, not locally — the metal doesn't crack, and the "figure-eight" comes out without weakening. Heated straightening happens in an oven: the temperature rises around the entire circumference of the rim, not at one point, so the alloy becomes pliable across the whole cross-section at once. Argon welding is used only where there's already a crack or a bent lip, and it comes after the straightening, not instead of it. Local heating with a torch is the main cause of cracks from someone else's straightening: the technician heats a spot, the metal around it stays cold, and the stress tears the alloy along the edge of the heated area. Even heating in an oven makes the whole circumference pliable, so straightening happens without micro-damage. Straightening a rim after a hit requires exactly this kind of heating, otherwise the metal tears along the edge of the heated area. Ask how they heat your rim: if the answer is "with a torch, right on the spot," look for another shop.
When straightening is done, we measure the deviation with a dial gauge — if it's more than 0.2 mm, we straighten again to factory tolerance. We set the gauge on the mounting surface and on the rim, spin the wheel on the stand, and watch the needle instead of relying on feel. The 0.2 mm tolerance is the line beyond which axial displacement starts to come through the steering wheel and wear the tire edge. We also check radial and lateral deviation separately: the "figure-eight" and axial displacement are corrected with different movements, and one doesn't replace the other. Ask the technician what he measured with; the answer "by eye, looks straight" is a sign the rim will come back with the same problem in a couple thousand kilometers. The measurement takes minutes, while a return visit for rework takes half a day.
| Defect | What we do | What we check afterward |
|---|---|---|
| Radial runout ("figure-eight") | Rolling with heating to 250 °C | With a dial gauge to 0.2 mm |
| Lateral runout | Straightening the side plane | With a dial gauge to 0.2 mm |
| Bent lip up to 5 cm | Panel beating the rim | Lip geometry |
| Bent lip over 5 cm | Panel beating with heating | Tire seating surface |
| Rim crack | Argon welding and straightening | Sealing and deviation |
We cover three types of wheel rims, show the difference in how they're straightened, and tell you honestly when restoration won't help and a replacement is needed.
We bring steel, alloy and forged rims back into shape, but differently: steel is straightened cold, while alloy and forged rims are heated to 250 °C. A steel rim is ductile and holds its shape after cold straightening, so restoring a steel rim is the cheapest. Rolling alloy rims requires even heating around the entire circumference — local heating causes microcracks in the spokes. Forged rims follow the same process as alloy, but the alloy springs back more and returns to factory geometry more easily. A forged rim springs back more than an alloy one — that's a plus for straightening, the metal returns to shape more easily; but cracks in a forged rim are also more dangerous, so an inspection before work is mandatory. In our practice, alloy rims damaged by a curb hit cause the most trouble: thin spokes handle the load worse than steel, and the technician first checks each one against the light and only then starts heating.
A set of four wheels takes three hours in a single visit. Below is how the schedule works, what booking ahead gets you, and when we come to the car.
We straighten a full set of 4 wheels in 3 hours in one visit, and you don't need to leave the car with us overnight. A set of 4 wheels in 3 hours means working one after another on the wheel straightening machine: the technician removes the tire, heats the rim, corrects the geometry and measures runout with a dial gauge, then moves on to the next wheel without waiting for the previous one to cool. Heating to 250 °C is even across the whole rim, so heating and straightening one wheel takes about 40–50 minutes, and four add up to one three-hour block. If a shop says "a set takes a full working day," ask whether they run several machines in parallel: we do four wheels one after another, but with no downtime between steps, and you pick up the car the same day.
Here's exactly what the rolling warranty covers, where its limits are, and how we handle a rim that was already straightened elsewhere and started wobbling again.
We give a 6-month warranty on rolling and record the term and conditions in the work order and the completion certificate when you pick up the car. It covers the work itself and the runout we fixed: if the rim goes out again during this period without any external impact, we sort it out at our own expense. Diagnostics for a warranty case are free — the technician puts the wheel back on the stand, measures it with a dial gauge and shows the deviation from the factory tolerance. We document the key stages in a photo report so the rim's original condition and what was done are visible. The warranty does not cover an accident that happens after the repair, third-party interference or natural wear — that's standard for any straightening, and it's better to know the limits in advance than to argue at pickup.
When a rim was straightened elsewhere and is wobbling again, we take it in for diagnostics and tell you honestly — we'll redo it or the metal is already tired. A repeat straightening after someone else's work is harder: the metal has been heated, the tolerance has to be held more carefully, and sometimes the rim loses so much spring that it can no longer hold its geometry. First we inspect the wheel, measure radial and lateral runout, check for microcracks in the area of the previous heating, and only then give a verdict. We look at such wheels especially closely before the estimate — sometimes it's cheaper to offer a replacement right away than to keep working the metal. When straightening makes sense, we bring it to factory tolerance and again record the result in the photo report.
We've briefly summed up what a car owner should keep in mind before coming in: how the procedure differs, which numbers quality is judged by, and when straightening no longer helps.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionAt our service, rolling one rim costs from 5,000 to 15,000 tenge depending on diameter, type (stamped or alloy), and degree of damage. For R16 and smaller rims — base price 5,000–7,000 tenge, for R17–R18 — 8,000–10,000, for R19 and larger — 12,000–15,000. The price is also affected by the need to fix complex deformations, cracks, or painting after rolling. The exact cost will be stated by the master after inspection; it is fixed in the work order and does not change during the process.
Standard rolling of one rim takes from 1 to 2 hours. If several rims need straightening or complex deformation is involved, the time increases to 3–4 hours. In most cases we perform the work on the day of request, but when busy, an appointment for the next day is possible. Urgent rolling (within an hour) — with a 50% surcharge, if equipment is available.
Yes, we provide a 6-month warranty on all wheel rim rolling work. The warranty covers the preservation of rim geometry, absence of cracks and deformations at the straightening points. If during the warranty period a defect related to our work appears, we will re-roll for free or refund the money. The warranty does not apply to mechanical damage after repair (e.g., hitting a pothole at high speed).
An appointment is desirable but not mandatory. You can come without an appointment, and if the equipment is free, we will do the work immediately. To guarantee no waiting and to book a convenient time, we recommend calling us or booking through the website 1–2 hours in advance. On weekends and during peak seasons (spring/autumn), an appointment is mandatory, as the queue is booked several days ahead.
Yes, you can bring your own rims — we work with both yours and ours (if you need a rental during repair, but we do not practice such a service). Rolling is performed on a professional machine, and the quality does not depend on whose rim it is. Both steel (stamped) and light-alloy (cast) rims are accepted. It is important that the rims are cleaned of dirt and have the tires removed. You can order tire removal and installation from us additionally.
Yes, we fix poor-quality rolling done at other services. The master performs rim diagnostics, assesses geometry and the presence of hidden defects. In most cases we can redo the work, correcting runout, ovality, and other issues. The cost of re-rolling depends on complexity and is usually 70% of the initial price. If the rim is severely damaged and cannot be restored (cracks, large fractures), we will honestly tell you and suggest a replacement.
These terms are often used as synonyms, but technically there is a difference. Rolling is passing the rim through rollers on a machine to eliminate bead deformations. Straightening is point correction of local damage (dents, edges) using force or heating. At our service we use a combined method: first rolling to align the overall geometry, then manual straightening for precise restoration of complex zones. This gives the best result and eliminates re-runout. For the client it is one service, the price depends on complexity.
After rolling, it is important to follow several recommendations. For the first 2 weeks, avoid sharp impacts and high loads (driving at high speed over potholes). Maintain correct tire pressure — it is indicated in the car's manual; reduced pressure increases the risk of rim damage. During seasonal tire changes, check balancing. Once every six months, it is advisable to have rim geometry checked at a service. Also avoid aggressive driving and do not hit high curbs — this will prolong the life of the rims.
We accept cash, bank cards (Visa, Mastercard, Kaspi QR code), and bank transfer for legal entities. No prepayment is required — you pay after the work is done, when you accept the result. When ordering complex rolling (with painting or restoration of a large number of rims), a 30% prepayment is possible for purchasing materials. All payments are confirmed by a receipt or work order.
If after our rolling the rim continues to vibrate, return to the service immediately while the warranty is valid. We will perform diagnostics for free: mount the rim on a balancing stand, check geometry. If a defect from our work is found, we will fix it on site or refund the full cost of the service. It is important that the vibration is not caused by the tire (bent tire) or other reasons — in that case we will help identify the source and give recommendations. We are responsible for quality and reputation.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
Hit a pothole on the highway, bent two rims on a Kia Sportage. Thought I'd have to replace them, but the guys at CARGID rolled the rims quickly and with quality. Paid 24,000, got the car back in two days. Everything is straight, no vibration. Thanks for the work!
Dealt with vibration on a Lada Vesta, kept thinking it was the tires. Turned out the rim was bent. At CARGID they did the rolling and also balanced it. Price 15,000, done in one day. The car drives like new. I recommend!
Brought my daughter's car wheels for repair. A crack appeared on the front rim. The masters worked quickly and efficiently. They rolled and balanced the rims. Everything is smooth, our car runs great. Thank you!
Ordered wheel rim rolling for a Toyota Camry. Very pleased with the result. The price is reasonable, they work carefully. Arranged for 19:00, done by the next evening. Everything is great!
Brought rims for rolling. Done quickly and efficiently. I have a Volkswagen Passat, the rims look like new. Cost 20,000 tenge, they meet the deadline. I recommend.
Started noticing a knock while driving. Turned out the rim was bent. At CARGID they did the rolling. Explained everything, showed me. Price 18,000, done in two days. Now the car drives smoothly. Thanks!
Contacted for rim rolling on a Hyundai Solaris. Quickly identified the problem, performed all necessary procedures. Paid 16,000 tenge, picked up the car the next day. Quality is top-notch.
I have a Mazda CX-5, hit a curb, a dent appeared on the rim. At CARGID they carefully straightened everything, didn't push anything extra. Paid 14,000, excellent result. Thanks for the honesty!
Had no idea rims could be rolled. Thought they could only be replaced. Good thing I ended up at CARGID. On a Nissan X-Trail, two rims were bent after off-roading. Rolled, balanced. Now everything is great. The price pleasantly surprised me — 23,000.
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.