A protective layer of polyurethane that absorbs chips, scratches, and abrasion. Invisible protection for the hood, bumpers, mirrors, and sills. We work with 3M, LLumar, SunTek films — we'll select the option to suit your needs and budget.
Current prices for paint protection film wrapping in Almaty, car service CARGID.
Service
Duration
Warranty
Price
Vehicle inspection and assessment of paintwork condition, selection of film type
30 minutes
24 mo
from 5 000 ₸
Washing and degreasing the body before wrapping
1 hour
24 mo
from 10 000 ₸
Paint protection film wrapping of front bumper (typical passenger car)
from 3 hours
24 mo
from 35 000 ₸
Paint protection film wrapping of hood (typical passenger car)
from 3 hours
24 mo
from 40 000 ₸
Paint protection film wrapping of fender (front/rear, one)
from 2 hours
24 mo
from 25 000 ₸
Paint protection film wrapping of side mirrors (set)
from 1 hour
24 mo
from 15 000 ₸
Paint protection film wrapping of side skirts (set)
from 3 hours
24 mo
from 30 000 ₸
Paint protection film wrapping of pillars and moldings (set)
from 2 hours
24 mo
from 20 000 ₸
Paint protection film wrapping of headlights (set, with removal/installation)
from 2 hours
24 mo
from 25 000 ₸
Paint protection film wrapping of rear bumper (typical passenger car)
from 3 hours
24 mo
from 30 000 ₸
Paint protection film wrapping of entire front part (bumper, hood, fenders, mirrors, headlights)
from 2 days
24 mo
from 180 000 ₸
Paint protection film wrapping of high-wear areas (bumper, hood, side skirts, mirrors, wheel arches)
from 2 days
24 mo
from 220 000 ₸
Full body paint protection film wrapping sedan/hatchback (wagon)
from 4 days
24 mo
from 350 000 ₸
Full body paint protection film wrapping SUV/crossover
from 5 days
24 mo
from 450 000 ₸
Paint protection film wrapping of roof (typical)
from 3 hours
24 mo
from 40 000 ₸
Paint protection film wrapping of door handles and overlays (set)
from 1 hour
24 mo
from 12 000 ₸
Paint protection film wrapping of radiator grille
from 1 hour
24 mo
from 15 000 ₸
Urgent wrapping (within 24 hours) of individual areas, surcharge to the cost of work
24 hours
24 mo
from 50 000 ₸
Mobile wrapping (master's visit around the city, price for work + surcharge)
from 4 hours
24 mo
from 150 000 ₸
Removal of old paint protection film and surface preparation
from 2 hours
24 mo
from 20 000 ₸
The exact cost depends on the make/model of the car, the condition of the paintwork and the selected film. Work is carried out in a clean bay with temperature control. Warranty periods — see the page «Warranty»
06
Advantages of paint protection film wrapping at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
24MO
warranty on labor — the term is stated in the work order.
Anti-gravel
24-month Warranty
3M, LLumar, SunTek
01
We tuck edges under the part
We fold the edges of the paint protection film behind the gaps — under the bumper, grille, headlights. There's no exposed edge outside that catches on a cloth during washing and gets lifted.
02
We heat with a heat gun at 60–70 °C
We heat the film with a mounting heat gun until elastic and form it along the curves of the fender and bumper. Without heating, bubbles and creases remain on complex radii.
03
We apply in a chamber, no dust under the film
Before wrapping, we wash the body and degrease the panels, and work in a booth with air filtration. A speck of dust under the paint protection film can't be removed — it's visible as a dot.
04
We deliver in 24 hours and give a 24-month warranty
We give the film a day for the adhesive to polymerize and check the edges. The 24-month warranty covers edge peeling, bubbles, and clouding, but not cuts or chips.
07
How car wrapping with paint protection film is done
Steps.
We explain how we work on protecting your car's body — from request to finished result.
01
Inspection and diagnostics
Call or message us on WhatsApp — we'll discuss the task and schedule a convenient time. The technician will inspect the body, measure areas, and check the quality of the paintwork.
request on WhatsApp
02
Discussing details
We give an exact price for labor and film, and fix deadlines with no hidden charges. We discuss film selection, thickness, and additional protection zones.
inspection and diagnostics
03
Washing and preparation
We prepare the car for wrapping: thorough washing and degreasing of surfaces.
estimate before work starts
04
Wrapping elements
We carefully apply the paint protection film to body parts, avoiding bubbles and creases.
work to factory procedure
05
Quality control
We check every area and use a photopolymer lamp for better adhesion.
result check
06
Car handover
We show the result, give care recommendations, and hand over the keys.
Car service in Almaty. We reply on WhatsApp and by phone.
35 000 ₸Paint protection film wrapping of front…
10 · Useful
Car Wrapping with Paint Protection Film in Almaty by CARGID
Author: Аружан А.detailing specialist (mobile), 11 years of experience
Published Updated
CARGID wraps the body with polyurethane paint protection film in Almaty: from a single panel to the "front end" package. We apply it in an air-filtered booth, tuck the edge under the panel, and heat the film to 60–70 °C. The warranty on the work is 24 months; the timeline and terms are recorded in the work order and acceptance certificate.
What car wrapping with paint protection film protects and where its limits are
Paint protection film is a consumable protective layer, not "armor." We explain what it actually saves the paint from and where it makes no sense, so your expectations match the result.
What damage polyurethane film protects against
Polyurethane film takes rock chips, highway sand, and small scratches from branches and parking, keeping them from reaching the clear coat. A rock leaves a mark on the coating, not on the paint. On the hood and front bumper, elastic polyurethane absorbs the impact energy: a rock leaves a mark on the coating, not on the paint. The working layer on road-grade series is 150–200 microns, enough for gravel flying out from under trucks at 100–120 km/h. Anti-gravel film on a car covers the areas that take the hit first: the front end, fenders, mirrors, sills, and rear bumper. On the Almaty–Kapshagay highway, the hood and bumper take the main load, so there the material works as a consumable that's cheaper to re-apply than to repaint a panel.
What paint protection film won't save you from
The film won't hold up to an impact in a crash, won't protect against parking dents, and won't stop corrosion if it has already started in the paint layer. Polyurethane doesn't replace metal: on contact with a curb or a shopping cart, the deformation goes into the body, and the layer only softens the friction. The UV filter in the composition slows paint fading, but the material itself yellows over time — on budget series it's noticeable after 3–4 years. The self-healing layer only pulls back surface marks on a warmed-up body, while a deep cut or a rock puncture stays visible — that area is spot-repaired or the panel is re-wrapped. Coating a car with polyurethane film makes sense on healthy paint: applying the material over blistered clear coat or a rusty sill just seals the defect underneath.
How polyurethane differs from PVC and vinyl in car wrapping with paint protection film
"Anti-gravel," "paint protection film," "protective layer" — in everyday use they're the same thing, but the materials differ a lot in properties. We break down which one actually protects the body and which only changes the look.
Comparing polyurethane, PVC, and vinyl by properties
properties of three body films
Material
What it protects against
Scratch recovery
Service life on the body
Polyurethane
chips, sand, branches, small scratches
has a self-healing layer
long, with UV filter
PVC
dust, small scratches, scuffs
no
shorter, yellows faster
Vinyl
color and texture change
no
depends on care
Which material to choose for your task
We work with polyurethane paint protection film because it's the one that solves the task of "preserving the paint from rock impacts," not just changing the look. This material handles sand, branches, and highway gravel, and surface marks on it pull back under the body heating up in the sun. A polyurethane coating costs more, but it holds up to rocks, while cheap PVC doesn't and yellows faster — people choose it when they want a different color or a matte texture. In our practice, polyurethane is what's most often requested for the hood and front bumper: these areas take the main flow of gravel. Anti-gravel film lays down smoother on undamaged paint, so it makes more sense to wrap a new car before the first damage; on an already chipped hood, the technician first records the defects in a written estimate so the client understands what will stay hidden under the film.
Color mismatch, edges, and why car wrapping with paint protection film is sometimes visible
Color mismatch and a visible edge are the two biggest fears before wrapping. We break down where they actually come from and which installation techniques eliminate them before the car is handed over.
Why color mismatch appears and how to avoid it
Color mismatch appears when the material comes from different batches, or when it's applied to a panel whose paint shade already differs — so we check the roll and warn about the risks before work begins. Before installation, we wash and degrease the panels so no dust or streaks stay under the paint protection film, and the service advisor tracks the work order from intake to handover. If the car has already been repainted, the panel's shade may differ from the factory one even before wrapping — the film won't make that gap worse, but it won't hide it either. That's why we show a sample right on the client's car so the decision is made on the spot, not from an internet photo. On the hood and bumper from different rolls, the shade is noticeable at the joint with the fender — check the batch before installation, not after.
How to tell the edge is tucked under the panel
A tucked edge means the edge is folded behind the gaps of the bumper, grille, and headlights, with no exposed edge on the outside. We do this tuck when wrapping with paint protection film into the edge so the material holds onto metal, not air. An exposed edge catches on a cloth at the car wash and eventually lifts — so check the work at the gaps, not on the flat surface. Run your finger along the joint between the bumper and fender and make sure the elastic layer goes inward rather than breaking off on the outside. We heat the material to elasticity with a heat gun at 60–70 °C and form it around the curves — without heating, bubbles stay on the radius. We record the timeline and warranty terms for this work in the work order.
How car wrapping with paint protection film works and how long it takes
We walk you through the car's route from intake to handover and explain what makes up the timeline: body prep, installation in the booth, adhesive curing, and edge checks.
Car wrapping with paint protection film options
coverage options by body zone
Option
What's included
Who it's for
Single panel
hood, bumper, fender, mirror, rocker panel or pillar
spot protection after a chip
Risk zone
hood and front bumper
city driving
Front end
bumper, hood, fenders, mirrors, headlights
highway driving and new cars
Rear zone
rear bumper, rocker panels
parking and loading
Installation steps and what affects the timeline
The car is received by the service advisor, then the panels are washed and degreased, installation is done in a chamber with heating at 60–70 °C, followed by a day for adhesive polymerization and edge inspection. Car wrapping with armor film in Almaty follows the same scheme: first preparation, then installation and edge control. We tuck the edges behind the gaps — under the bumper, grille, headlights — so that no open edge remains outside that could catch on a cloth during washing. The time depends on the number of elements and the complexity of the radii: the hood and bumper have more curves than a flat sill, and the 'front end' package combines the hood, bumper, fenders, and mirrors in one go. A speck of dust under the film cannot be removed — it remains a visible dot, so we work in a booth with air filtration, not in an open area. Bubbles on complex radii appear where the film was not heated enough, and can only be fixed by re-applying that section.
Warranty, care and what to do about defects
Warranty and care determine how long the armor film stays on the body and who is responsible for a defect. We put the terms and rules in writing up front so there are no misunderstandings when the car is handed back.
What the 24-month warranty covers
We give a 24-month warranty on armor film and record the term and conditions in the work order and the completion certificate when the car is handed back. The coverage applies to the work performed and the materials installed, but does not cover accidents, third-party interference or natural wear. If the customer supplies the film, we can't be responsible for how it behaves on the body — we discuss that option separately before work begins. We do spot repair of a single area without re-wrapping the whole panel: we locally remove the damaged fragment and install a new one, keeping the rest of the coating. If you're not happy with the result, show the car to the service advisor — diagnostics for a warranty case are free, and the inspection will show whether it's an installation defect or mechanical damage. In our shop's experience, most disputes are resolved by checking the edges and re-forming the section, not by a full redo.
Care in the first day and at the car wash
For the first day after wrapping, the film is bonding with the body, and during this time it's best not to wash the car, not to park it in direct sunlight, and not to treat it with aggressive chemicals. An automatic car wash with brushes is a bad idea for armor film — not because of the material's strength, but because of the open edges at the seams: the brush catches the edge and lifts it. At a touchless wash the risk is lower, but even there keep the nozzle away from the seams and don't blast one spot with high pressure. After the first few washes, it's worth showing the car to a technician to inspect the edges — checking an edge tucked under a part takes a couple of minutes, and a fold noticed in time can be fixed without removing the film. In summer in Almaty the body heats up more, so don't let water droplets dry in the sun — water with salts leaves marks on polyurethane.
What to know about paint protection film
A quick summary of the whole article: what protection actually gives you, where visual defects come from, what the timing consists of, and what to look for in the warranty documents.
Limits of protection: polyurethane handles chips and minor scratches, but it won't save you from accidents, dents, or corrosion that has already started.
Color mismatch and edges: these are a result of the film batch and the way it's laid, not a "material defect" — they're checked against the gaps and a sample on the body.
Timing: made up of preparation, work in the chamber, a day for polymerization, and edge inspection.
Warranty: it's worth something when its term and conditions are written in the work order and the acceptance report, not just promised verbally.
First day: gentle washes and rest after installation extend the life of the coating more than any care product.
11
Frequently asked questions about car paint protection film installation in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The price depends on the size of the car, the complexity of the body, the type of film (polyurethane or PVC), and the scope of work: full wrap, front bumper, hood, mirrors, sills. On average in Almaty: hood wrap — from 40,000 tenge, front bumper — from 35,000 tenge, full wrap of a sedan — from 350,000 tenge, SUV — from 450,000 tenge. We provide the exact cost after inspecting the car.
The time depends on the scope of work. Partial wrapping (hood, bumper, mirrors) usually takes 1-2 days. Full wrapping of a passenger car — from 3 to 5 working days, an SUV or minivan — from 5 to 7 days. The time is affected by the condition of the body, the complexity of the elements (presence of sharp edges, complex curves), and the chosen film. If you need an urgent exit — we can discuss speeding up, but without compromising quality.
Yes, we provide a warranty on the work — 24 months. It covers film peeling, bubbles, wrinkles, integrity violation (if there was no mechanical damage). The film itself has a manufacturer's warranty: for polyurethane films (e.g., LLumar, XPEL, SunTek) usually 5-10 years for transparency and protective properties. The warranty is valid if you follow the care rules that we issue after wrapping.
Paint protection film wrapping takes from one to several days depending on the volume of zones and the complexity of the body, so it's better to book in advance, checking available slots for your timeframe. The car can be left at the service for the entire period of work. The exact acceptance date will be agreed after inspecting the body and choosing the film.
You can bring your own film, but we recommend using materials that we purchase directly from trusted suppliers. This guarantees quality and originality. If you bring your own, we will check its suitability (shelf life, type, roll width). If you use your own film, the warranty on the work remains, but the manufacturer's warranty may not apply to the material itself. Also, the cost of work may change slightly, as wrapping with non-standard material takes more time.
If after receiving the car you find defects (bubbles, wrinkles, peeling, dirt under the film) — immediately inform us, within 3 days we will fix any defects free of charge. During the warranty period (24 months), we also fix problems that arose not through your fault. If the defect is a consequence of poor workmanship, we re-wrap the element at our own expense. Our goal is for you to leave satisfied.
There are several popular protection options: 1) Full body wrap — protects all paint from chips, scratches, reagents. Maximum level of protection, but the highest price. 2) Front part wrap (hood, bumper, fenders, mirrors) — protects the most vulnerable areas from stones and sand. 3) Risk zone (bumper, hood, sills, area behind wheels) — a budget option, covers places that suffer most often. The choice depends on your tasks and budget. We help you choose the optimal option.
In the first 3-5 days after wrapping, avoid high-pressure washing and automatic car washes — the film must fully 'set'. After that, you can wash the car by hand with a soft sponge and car shampoo, without abrasives. Avoid aggressive chemicals, it is better to remove bitumen spots with special products. Do not park the car under direct sunlight for a long time (not critical, but the film may lose its gloss faster). Once a month, you can polish the film with special compounds. After 2-3 months, we recommend coming for a free inspection.
The cost of paint protection film wrapping depends on the area of protected zones, the condition of the paintwork, and the type of film — standard or self-healing. Payment is possible in cash and by bank card, also non-cash payment is available for legal entities. Usually a prepayment for the material is made, and the remainder — after acceptance of the work; the exact payment procedure is agreed upon booking.
Paint protection film (polyurethane) effectively protects against chips from small stones and sand, scratches from branches and careless washing, minor parking accidents (on contact). It is resistant to reagents, UV, and preserves the factory paint. But the film will not save from strong impacts at speed (e.g., in an accident), from deep scratches with a key with strong pressure, from dents and body deformation. In such cases, body repair is required, and the film is re-applied afterwards.
12
What clients say about our armor film wrapping
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Alexey
First time wrapping a car, CARGID did everything quickly and with high quality. They put film on the hood, you can't even tell the film is there. Protection is top-notch, no longer afraid of chips.
Dmitry
Sportage
Came in with a Kia Sportage, headlights got scratched by stones. The guys wrapped the headlights with film, now it's not scary to drive on the highway. The price is reasonable, the work took a couple of hours. I recommend.
Marina
I hesitated for a long time whether to apply film, but after catching a chip on the hood, I decided to do it. Done at CARGID, very neatly, you can't even see the seams. The car looks like new.
Sergey
Ordered sill wrapping on Tiguan. Done quickly and with quality, sills no longer scratch. The price is reasonable, thanks.
Aidar
I protected the front part of a Lexus RX with paint protection film. The guys did everything perfectly, even wrapped the mirrors. Now I'm calm about the paint. The price matches the quality.
Viktoria
I got a warranty case for a scratch on the bumper, but decided not to paint, but to cover with film. At CARGID they recommended the film. It looks great, the edges are invisible. Thanks for your patience, I asked a lot of questions.
Bolat
Camry
Film wrapping on the hood of Camry — excellently done. The hood is protected, appearance unchanged. Price 85k, term one day. The service is very useful.
Evgeny
Came in with a Qashqai, the body had many chips from gravel. They wrapped the front part, smoothed everything out, now it looks super. I recommend this service, the craftsmen know their job.
Kasym
Қызметіне ризамын, көлікті капот пен қанаттарын бронь пленкамен жапты. Барлығы ұқыпты, жұмыс сапасы жоғары. Бағасы да қолайлы. Рахмет!