

Dashboard in Carbon
- Cause
- Wanted a sporty look for the interior, but not to change parts.
- Found
- Stock panel without defects, but scratches on plastic.
- Done
- Removed dashboard, wrapped in carbon film, reinstalled.

Protect interior parts from scratches, scuffs, and fading. We carefully cover panels, door cards, sills, and other elements with film — matte, glossy, or carbon. The result lasts for years, and the interior looks like new.
Covering car interior parts with protective film by elements

We remove the A, B or C pillar, clean it, cover it with film and put it back. The client gets a smooth surface without wrinkles or bubbles.

We remove four door sills, clean and cover them with film, then reinstall. The client gets scratch protection and a refreshed look.

We remove the headliner, clean and carefully cover it with film, then reinstall. The client gets an even surface without wrinkles or peeling.

We remove the steering wheel, clean and cover it with film, then reinstall. The client gets a refreshed steering wheel with wear protection.

We remove one seat, clean the surface and cover it with film, then reinstall. The client gets protection and a neat appearance.

We disassemble interior elements, clean and cover panels, pillars, headliner and other parts with film. The client gets a refreshed interior.

We remove a small trim, button or handle, clean and cover it with film. The client gets a neat appearance and protection for the small element.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
Our interior wrapping work: from polishing to full finishing.
We will carefully wrap your car's interior with high-quality film: protect it from scratches, refresh its look. Prices are for labor, materials are paid separately.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Inspection and consultation, film selection (type, color, texture) | 30 minutes | 12 mo | free |
| Small part: sill trim, button, handle (up to 0.1 sq.m) | 1–2 hours | 12 mo | from 1 000 ₸ |
| Medium part: center console, armrest, mirror frame | 2–4 hours | 12 mo | from 3 500 ₸ |
| Large part: dashboard, door card | 4–6 hours | 12 mo | from 6 000 ₸ |
| Wrapping one pillar (A, B, C) | 1–2 hours | 12 mo | from 2 000 ₸ |
| Wrapping sills (all four) | 3–4 hours | 12 mo | from 5 000 ₸ |
| Wrapping the interior headliner (cars up to 4.5 m) | 1–2 days | 12 mo | from 15 000 ₸ |
| Wrapping the interior headliner (cars over 4.5 m, minivan, SUV) | 2–3 days | 12 mo | from 20 000 ₸ |
| Wrapping the steering wheel | 2–3 hours | 12 mo | from 4 000 ₸ |
| Wrapping seats (one seat) | 3–4 hours | 12 mo | from 5 000 ₸ |
| Wrapping the entire interior (sedan/hatchback car) | 3–5 days | 12 mo | from 45 000 ₸ |
| Wrapping the entire interior (SUV/crossover) | 4–6 days | 12 mo | from 55 000 ₸ |
| Urgent wrapping (within a day, surcharge for urgency) | up to 8 hours | 12 mo | from 5 000 ₸ |
| On-site wrapping (at your location) | by arrangement | 12 mo | from 5 000 ₸ |
| Surface preparation (washing, degreasing, sanding) | 1–2 hours | 12 mo | from 1 500 ₸ |
| Removal and installation of interior parts (complex cases) | 2–4 hours | 12 mo | from 3 000 ₸ |
| Repair of damaged film (section replacement) | 1–3 hours | 12 mo | from 2 500 ₸ |
| Applying a pattern/lines/logo | 2–4 hours | 12 mo | from 3 000 ₸ |
The exact cost depends on complexity, surface condition, and film type. We use materials from trusted brands, warranty on work — 12 months. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We remove pillars, sills and steering wheel, apply film on the removed part. Edges go under the edge, do not stick out after a month.
At this temperature, the film stretches along the radius without wrinkles and sets on the adhesive. Such bends cannot be covered by eye.
This is how long it takes for disassembly, glue drying and assembly without rushing. In a day, we only do a small part or a pillar.
If the film peels off due to our fault, we will re-cover for free. The warranty does not cover cuts and scuffs from items.
We describe step by step what will happen to your car from request to delivery.

You submit a request, we clarify details and schedule a convenient time. At the service, we inspect the parts and select film by color and texture.
request on WhatsApp
We fix the exact cost and duration of work, approve the layout.
inspection and diagnosticsWe remove elements, thoroughly wash and degrease the surfaces.
estimate before work starts
We cut blanks with margin and fit them to each part.
work to factory procedureWe carefully apply the film, expelling air and smoothing wrinkles.
result check
We trim the edges, heat the seams and check the fit quality. We check the result, reinstall the parts and hand over the car.
warranty in the work orderWalk-ins welcome. By appointment — no queue.
Detailing team. 9–18 years of experience.
Author
Body polishing specialist

Interior deep cleaning specialist

Polishing specialist

Detailing specialist

Send a photo of the damage, the car make and year to WhatsApp. We will give you a price range, the timeframe and help you pick a booking time.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

CARGID wraps interior parts with film in Almaty, disassembling panels and heating up to 80 °C, so the edge tucks under the edge and doesn't stick out. A full interior takes 1–2 days, we give a 12-month warranty and record the terms in the work order. First an inspection and a written estimate.
We wrap interior parts one by one or put together a set for the whole car: pillars, sills, steering wheel, headliner, seats, console. The scope of work is chosen by the owner, and we advise on the texture of the parts so the result looks cohesive.
| Scope of work | What's included | Timeline | What we check upon delivery |
|---|---|---|---|
| One pillar (A, B, C) | removing the pillar, wrapping, tucking the edge | same day | edge tucked under the edge, no wrinkles on the radius |
| Sills | removal, wrapping, heating the joints | same day | joint with plastic, no bubbles |
| Steering wheel | disassembly, wrapping along the radius, trimming | same day | seam, heating at 80 °C, adhesive bonding |
| Headliner | removal, wrapping a large panel, drying | 1–2 days | even tension, edge around the perimeter |
| Seat | disassembly, wrapping, assembly | 1–2 days | adhesive bonding, joints on bends |
| Full interior | disassembling panels, wrapping, drying the adhesive, assembly | 1–2 days | all edges, joints, test drive |
A color mismatch is possible if you choose the film from a photo or by color name — we select the texture and shade during an inspection of the car, next to the other interior parts. Film wrapping of interior parts in Almaty starts with samples: we apply a piece to the plastic in daylight and see how the shade behaves on a bend. If we wrap the center console while the dashboard remains factory, it's important that not only the color matches but also the texture — matte film next to glossy plastic reads as a different part even with an exact shade. Carbon texture on adjacent panels requires the pattern direction to match, otherwise the grain runs mismatched. In my opinion, it's more honest to show two or three options next to the part right away than to promise a color match from a catalog. Bring the car for an inspection before booking — the selection takes about twenty minutes and eliminates half the rework.
The key difference of our technology is that we remove the panels rather than tucking the material in place. Here's step by step: what happens to the part from disassembly to assembly and why the edge holds.
We remove the pillars, sills, and steering wheel and apply the vinyl to the removed part — that's the only way the edge tucks under the factory edge and doesn't stick out after a month. Wrapping the interior with film and disassembling panels takes more time than working "in place," but it gives a clean contour around the entire perimeter: on the pillar the material goes into the gap between the trim and the body, on the steering wheel — behind the wrap seam, on the sill — behind the cover. Tucking in place saves a day, but the edge remains visible and catches on clothing and fingers — that's exactly where the coating starts to peel first. After such a "quick" option, the edge often has to be redone. We disassemble carefully: we put clips and fasteners in labeled bags so nothing gets mixed up during assembly.
We heat the material with a heat gun to 80 °C — at this temperature it stretches along the radius without wrinkles and bonds to the adhesive; you can't wrap such bends by eye. The technician moves the squeegee from the center of the part to the edge, heats each bend, and rolls the seam with a needle roller to drive out air from under the adhesive layer. Underheated coating goes on with tension, and in the Almaty heat the adhesive lets go — the part starts to bubble within a few weeks. For the same reason we don't stretch vinyl cold and don't rush: it's better to heat an area twice than to redo the whole pillar later. You can't check the heat by touch — you need a pyrometer or an experienced hand.
We have two base films — vinyl and polyurethane. The difference shows up in the heat and on bends, so we select the material for each specific part, not "by default."
| Parameter | Vinyl film | Polyurethane film |
|---|---|---|
| Elasticity on a radius | medium, heating required | high, stretches over complex bends |
| Heat resistance in the interior | lower | higher |
| Trimming along the contour of small elements | more convenient | requires care |
| Where we use it more often | buttons, covers, handles | front panel, console, steering wheel, headliner |
Wrapping over an OEM part and reupholstering in leather or synthetic leather are two different jobs, and they differ in turnaround, care, and how repairable they are. In the first case, the original plastic stays underneath, and after a few years the covering can be removed, returning the part to its original look. The second option requires removing the upholstery, working with foam and glue, and there's no going back to the factory finish. Care is simpler with wrapping: a soft cloth without abrasives is enough, whereas leather and synthetic leather need periodic conditioning so the material doesn't dry out in the sun. If a part is damaged — a crack or deep scuff on the plastic — a polymer layer will emphasize the texture, while reupholstering will hide it; so the choice depends on the condition of the surface, not just on looks. For the dashboard we usually recommend polyurethane: it's more elastic on curves and handles heat better, and wrapping the dashboard with film doesn't require replacing the upholstery.
Turnaround depends on the scope: a small part or a pillar takes a day, a full interior takes 1–2 days. Below is what that time consists of and when you can pick up the car.
A full interior takes 1–2 days — that's how long disassembly, glue drying, and reassembly without rushing require; in a single day we only do a small part or a pillar. We remove the pillars, sills, and steering wheel, lay the film on the removed part, and heat it with a heat gun up to 80 °C so the vinyl conforms to the curves without wrinkles. After laying, the glue needs time to set — we put the panels back only the next day. A headliner or a seat alone takes almost a full shift, and a full interior is a dozen parts with different profiles: dashboard, console, door trims, handles. If you reassemble the panels before the glue is fully dry, the edge will "float" at the first heat in the sun — so rushing the reassembly costs more than an extra day of waiting.
You can book in advance by phone — we work daily from 09:00 to 20:00, by appointment with no queue; you can get in the car right after pickup, but for the first few days it's best not to get the treated parts wet. The car is received by the service advisor: he opens the work order, records the scope of work, and manages the order through to pickup. Before pickup we do a test drive and a photo report of the key stages. Booking in advance isn't about the queue — it's so the advisor has time to match the film by texture before disassembly. For the first few days after wrapping, skip wet interior cleaning and pressure washing — the glue is still curing under the edges, and a jet of water can lift the edge.
We give a 12-month warranty on the wrap, and the term and conditions are recorded in the work order. Below is what counts as a warranty case and what doesn't, and how to care for the film so it lasts.
We give a 12-month warranty on interior part wrapping and record the term and conditions in the work order and the handover report at pickup. If the film bubbles or lifts due to our fault, we rewrap it free of charge, and diagnostics for a warranty case are done at no cost. The warranty covers the work and materials we installed ourselves: peeling at the edge, lifting on curves, seam separation. It does not cover cuts and scuffs from keys, buckles, and objects, interference by third parties, or natural wear. We accept the customer's own film for the job, but the warranty doesn't apply to it — we haven't tested the properties of someone else's material. So before buying a roll, show us a sample: we haven't tested the properties of someone else's material, and any redo will be on you.
We've gathered the main things that determine the result of interior wrapping: the scope of work, part preparation, film heating, shade matching, and warranty terms. These five points are worth keeping in mind before you hand the car over for the job.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost depends on the number and complexity of parts, type of film, and surface condition. In our auto service, the minimum price for one simple part (for example, a door sill overlay) is from 5,000 tenge. Wrapping a dashboard and complex elements can cost from 45,000 tenge. We calculate the exact estimate after inspection. We will list all works and materials so there are no extra charges.
We use vinyl and polyurethane films. Vinyl (for example, KPMF, Hexis) is durable and affordable, more often used for decor, with scratch protection. Polyurethane (Oralight, XPEL) is elastic, self-healing, better for complex surfaces, and lasts longer. We will select the optimal one for your tasks. Exact prices are in the price list on this page.
A standard set (dashboard, doors, armrest) takes 1-2 days. Individual parts, for example, one overlay, — from 2 to 4 hours. Timelines increase with complex geometry or if interior elements need to be removed. We state the exact time after evaluation, usually we meet the agreed day.
Yes, we provide a 12-month warranty on works and materials used. If during this period the film starts to peel off, bubble, or lose its appearance due to our fault — we will redo it free of charge. The warranty does not cover mechanical damage (for example, scratches from keys) and violations of care rules.
Booking is desirable 1–2 days in advance: interior parts are removed, cleaned, and dried before wrapping, so the craftsman works with them not in a stream. The wrapping of one part itself takes from 1 to 3 hours, a full set of interior elements is usually left for a day. The term depends on the number of parts, their shape, and the chosen film — glossy, matte, or with carbon texture.
Yes, you can use your material. But it is important that the film is of high quality and suitable in structure. We will check it and warn about possible risks. In this case, the warranty applies only to our works, since we cannot control the properties of the film. The cost will not include the material.
If defects are found — bubbles, wrinkles, peeling — you immediately call us. During the warranty period, we are obliged to fix the defects free of charge. If the problem is in our work, we will redo it, usually on the day you come in (complex repairs take up to 3 working days). If it is due to the material, we will offer an alternative or refund the money for the work, but not for the material.
The cheap option is vinyl film, less surface preparation, standard service. It is less resistant to scratches and fading. The expensive one is polyurethane film, more complex installation with on-site fitting and removal of parts. Such wrapping lasts longer, is not afraid of sun and minor damage, and looks better. The price difference is usually 30-50%.
In the first 3-5 days after wrapping, avoid contact with water and temperature changes. Then simply wipe the parts with a soft microfiber cloth with regular car shampoo. Do not use abrasive agents and solvents. Once a month, you can apply vinyl polish. If these rules are followed, the film will keep its appearance for the entire service life.
Payment in a way convenient for you: cash, Kaspi card, bank transfer, or via QR. We provide a receipt and warranty card. A 30% prepayment is possible to book time, the rest — after the work is completed. We also work with legal entities and issue closing documents.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
I ordered dashboard wrapping in carbon for my Toyota Camry. Done in a day, price 55,000 tenge. Very neat, the film laid perfectly, no bubbles. The interior was instantly transformed, thank you!
I wrapped the door cards on a BMW 5 in Alcantara. Thought it would be expensive, but it came out to 78,000 tenge, and the work is 5+. The craftsmen removed the cards, did everything cleanly, the seams are even. Now the interior looks like new.
I had the center console wrapped in gloss on a Kia Sportage. Done very quickly, in 4 hours, price 32,000 tenge. The scratches are gone, I'm satisfied. Thank you!
I ordered pillar wrapping in gloss on a Mazda CX-5. Done in 3 hours, only 18,000 tenge. My husband didn't believe it was so cheap, but the quality is excellent. The pillars are now like a mirror, no scratches visible.
Had wood-style inserts wrapped on an Audi A6. They charged 45,000 tenge, done in a day. The result is super, the texture is natural, no bubbles. I recommend!
I wanted to refresh the headliner in my Volvo XC60, the light one got dirty quickly. The guys suggested wrapping it in black film. Done in 2 days, cost 120,000 tenge. The headliner is now perfect, and no stains visible. Very pleased!
I dropped the car off for console wrapping because I scratched it with keys. On a Subaru Impreza done in 4 hours, only 32,000 tenge. Thanks for saving an expensive part! Now the console is like new.
I wrapped the door cards on a VW Passat, the old upholstery had peeled off. Done in 2 days, 78,000 tenge. The quality of the seams is top-notch, the material is pleasant to the touch. Now the interior looks expensive.
I ordered wood-style insert wrapping on a Hyundai Tucson. I had wanted to replace the black plastic for a long time. The craftsmen did it in a day, I paid 45,000 tenge. It looks luxurious, not a single scratch left.
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.