Authorexperience

Carbon film is not only a striking appearance but also reliable protection of the body from chips, scratches, and UV rays. Carbon wrapping is performed in our detailing center with precise selection of shades and textures. Full body coverage takes from 2 days, warranty on materials and work — 24 months.
From headlight tinting to full body wrapping — the entire cycle of film work

We apply carbon film to headlights and taillights. The lights remain functional, and the look is a deep dark carbon.

We carefully remove the old coating from one element, clean off glue and residue. The surface is ready for new wrapping.

We polish the body, remove minor scratches and unevenness. The film lies flat, without bubbles or defects.

We wrap the bumper, hood and fenders with film. We protect the most vulnerable areas from chips and sand.

We apply film to mirrors and body pillars. These small details complete the car's look.

We wrap the car roof with a single sheet. The result is a smooth surface and noticeable contrast with the body.

We wrap a sedan or hatchback completely according to the standard body. The whole car is in one color and protected.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
Exact prices for all types of carbon film application work, including preparation, wrapping, and finishing.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Inspection and diagnostics of the body with a specialist visit | from 1 hour | 24 mo | from 7 500 ₸ |
| Inspection and diagnostics of the body at the service center | 30 min | 24 mo | from 3 000 ₸ |
| Washing and degreasing of the body before wrapping | from 2 hours | 24 mo | from 8 000 ₸ |
| Removal of old film from the body (per 1 element) | from 2 hours | 24 mo | from 5 000 ₸ |
| Polishing of the body before film application | from 4 hours | 24 mo | from 19 000 ₸ |
| Partial wrapping (bumper, hood, fenders) | from 4 hours | 24 mo | from 20 000 ₸ |
| Wrapping of mirrors and pillars | from 2 hours | 24 mo | from 10 000 ₸ |
| Wrapping of the car roof | from 6 hours | 24 mo | from 30 000 ₸ |
| Full wrapping of a sedan / hatchback (standard body) | from 3 days | 24 mo | from 180 000 ₸ |
| Full wrapping of an SUV / crossover (standard body) | from 5 days | 24 mo | from 250 000 ₸ |
| Full wrapping of a sports car / premium class (complex shapes) | from 7 days | 24 mo | from 400 000 ₸ |
| Wrapping of doors and sills | from 6 hours | 24 mo | from 25 000 ₸ |
| Wrapping of the front bumper with dismantling | from 4 hours | 24 mo | from 20 000 ₸ |
| Wrapping of the rear bumper with dismantling | from 4 hours | 24 mo | from 18 000 ₸ |
| Removal and installation of moldings, wipers, emblems | from 2 hours | 24 mo | from 8 000 ₸ |
| Architectural film cutting (complex elements) | from 3 hours | 24 mo | from 12 000 ₸ |
| Installation of carbon film in the interior (dashboard, center console) | from 5 hours | 24 mo | from 25 000 ₸ |
| Carbon tinting of headlights and taillights | from 2 hours | 24 mo | from 9 000 ₸ |
| Urgent wrapping (within 48 hours) | from 2 days | 24 mo | from 350 000 ₸ |
| Mobile wrapping (at your address) | from 1 day | 24 mo | from 200 000 ₸ |
Prices are indicated taking into account the cost of material and work. The exact cost depends on the complexity of the body and the chosen type of carbon film. For full wrapping, we recommend booking in advance. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We remove the old film, wash the body and go over with polish. Without this, all risks and scratches show through the carbon.
We tuck the edges under the part's edge and heat with a hairdryer until shrinkage. The seam does not collect dirt and does not come off after the first winter.
We wrap a sedan in a day, a crossover in two: disassembly of pillars and mirrors, drying each layer. Haste causes detachment at the corners.
We cover peeling, edge lifting and bubbles due to our fault. You come — we re-wrap the area without arguments.
From request to vehicle handover — 6 clear steps, each under the master's control.

Call or write on WhatsApp — we clarify the details and schedule a convenient time. The master inspects the body, determines the condition of the paintwork and recommends which coating will suit.
request on WhatsApp
We fix the cost in the work order — it does not change during the process.
inspection and diagnosticsWe wash, degrease and polish the body so that the coating lies perfectly.
estimate before work starts
We apply the carbon composition in several layers in a clean booth with humidity control.
work to factory procedureWe let the coating harden and gain strength within 24 hours.
result check
We polish the surface to a mirror shine and remove excess material. We check the result together with you, give care recommendations and a warranty.
warranty in the work orderWalk-ins welcome. By appointment — no queue.
Detailing team. 9–18 years of experience.
Author
Body polishing specialist

Interior deep cleaning specialist

Polishing specialist

Detailing specialist

Send a photo of the damage, the car make and year to WhatsApp. We will give you a price range, the timeframe and help you pick a booking time.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

Carbon fiber coating for cars in Almaty at CARGID is body wrapping with carbon-textured vinyl film. Before work, we polish the body, tuck the edge behind the panel edge, and heat it with a heat gun until it shrinks. A sedan takes one day, a crossover two days, warranty 24 months in the work order.
Under similar names, there are three different products: carbon film, liquid carbon, and pattern imitation. We separate them by composition and result so you don't order one thing and get another.
Carbon film on a car is vinyl with a carbon fiber texture that is glued to the body; liquid composition is polyurethane that is applied and left to cure in a layer. Vinyl holds due to adhesion to the clear coat, stretches with a heat gun over curves, and follows the geometry of the part. Polyurethane spreads over the surface and hardens into a film several tenths of a millimeter thick, filling minor scratches. Both handle chips differently: vinyl absorbs impact due to elasticity and is replaced as a whole fragment, while the liquid layer takes the impact and chips off in a spot. Film can be removed and restore the factory look, liquid composition is removed only by sanding — so to preserve the paintwork, choose film, especially on new cars that are planned to be sold.
3D carbon and hydrographics are pattern imitations on film, not a three-dimensional texture; tinting film has nothing to do with body trim. In a 3D pattern, the design is printed and raised by embossing, while in hydrographics the ornament is transferred in water onto a film base — both give a flat picture at an angle and in the sun. Real textured vinyl has a three-dimensional woven structure that changes shade when the part is turned. Tinting darkens glass and is not related to decorative body trim. Imitation is cheaper in material but gives itself away in the sun with a flat pattern — if you need the look of real carbon fiber, take textured vinyl, and leave imitation for interior elements where it isn't examined up close.
For some, carbon lasts for years; for others, it peels after the first winter. The difference is in surface preparation and how the film edge is tucked.
We polish the body before wrapping: remove old film, wash, and go over with polish, otherwise all risks and scratches show through the vinyl. Before application, the technician inspects the clear coat for chips and traces of previous removal — every defect under the film reads as a shadow in the sun. You can't stick to dirty clear coat not because of aesthetics but because of adhesion: dust remains under the vinyl, and the edge peels exactly where the adhesive layer didn't bond to the surface. More often, cars come back that were wrapped over old film without removal — the adhesive bonds to the previous layer, and that layer peels from the clear coat along with the new coating. Polishing is included in the total work time. Before wrapping, check whether the service removes the old layer and polishes the clear coat — it's cheaper than redoing.
We tuck the film edge behind the edge of the body panel and heat it with a heat gun until it shrinks — the seam doesn't collect dirt and doesn't peel after the first winter, unlike a butt joint. Vinyl on the edge is folded inward and warmed with a heat gun, shrinking to the shape of the metal; at the joint of two sheets, a line remains where dust and reagents pack in. Heating with a heat gun is not for looks: the material shrinks to the relief and doesn't stretch back in frost, so the edge holds without extra adhesive. Complex surfaces — mirrors, pillars, roof — are done in several layers with drying of each, otherwise tension appears at the bends. Peeling at corners is almost always due to butt application or insufficient heating, not the quality of the vinyl itself. Ask how the technician will handle the edge at the corners — tucked under or butted.
We keep one agreed timeframe: sedan — one working day, crossover — two. Below we break down what exactly takes this time and what wrapping scopes there are.
We wrap a sedan in a day, a crossover in two, and the time goes not into the film itself but into disassembling pillars and mirrors and drying each layer. Rushing leads to peeling at corners, so we don't compress the schedule for the client. On a sedan, we remove pillar trims and mirror housings, heat the edges with a heat gun until shrinkage, and go over each section separately — otherwise the film on the car lays with tension and stretches back after a season. For a crossover, we add a second day due to the roof and rear door area: there are more bends and longer drying. A car that was "finished in an evening" comes back with a lifted edge in the first months. It's better to wash the car after wrapping when the edge has fully set — earlier, pressurized water lifts the edge.
| Work option | What we wrap | Timeline |
|---|---|---|
| Carbon tinting of headlights | headlights | same day |
| Wrapping mirrors and pillars | mirrors, pillars | same day |
| Roof wrapping | roof | same day |
| Partial body wrapping | bumper, hood, fenders | 1 day |
| Full sedan wrapping | whole body | 1 day |
| Full crossover wrapping | whole body | 2 days |
The warranty for carbon is 24 months, but it has honest boundaries. We break down which cases we cover, where responsibility ends, and what to do if a defect appears on the film.
The warranty on carbon fiber coating for a car in Almaty is 24 months. We record the term and conditions in the work order and the acceptance certificate when the car is handed over. Two years cover the wrap itself and the materials our technicians install: film peeling, lifted edges, and blisters on the treated area. Diagnosis for a warranty case is free — bring the car in, and the service advisor will inspect the area and determine the cause. It applies to the work performed and the parts installed, but does not cover accidents after the repair, third-party interference, natural wear, or material brought by the client. Honest boundaries matter more than a long term: the owner sees upfront what the service is responsible for and what it isn't. That's why we put the conditions in writing, not just "by word of mouth" — in a disputed situation, all it takes is opening the certificate.
If you find a blister or a lifted edge after the wrap, bring the car in — diagnosis for a warranty case is free, and we re-wrap the area. Blistering usually comes not from the film but from dust underneath it — that's why we show the client what was under the edge and redo the problem spot instead of "smoothing it out." We handle such requests in order of appointment: the inspection takes little time, and we decide on the fix — re-wrapping or a local repair — once we see the cause. We take photo reports of the key stages of the work, and before handover we do a test drive to check how the film holds on corners and edges. A tip from practice: don't try to heat the defect with a hair dryer yourself — overheating deforms the coating, and the panel will have to be replaced entirely.
We'll cover whether you can bring your own material, how to tell a careful service from a rushed one, and what goes into the total. We won't quote numbers — the price list is in a separate block on the page.
We accept client materials — OEM, aftermarket, or the client's own roll is their choice, but the warranty does not cover material brought by the client. We record the term and conditions in the work order and the certificate at handover so there are no discrepancies. The boundaries are simple: a 24-month warranty applies to the work performed and the materials we install; it does not cover a roll you bring. The reason is that we don't control the properties of the material: the batch, storage conditions, and shelf life are determined by the supplier. Buying your own saves on material, but if the coating misbehaves in the sun, that's a question for the supplier, not for the technician's work. Our advice: if you're bringing your own roll, bring it in advance — we'll unroll and inspect the material before you're booked for the wrap.
A quality service does the diagnosis and a written estimate first and starts work only after the client agrees — that's how intake works with us too. The car is received by the service advisor, who manages the work order through to handover, and technicians with 9–18 years of experience work in the shop. We always polish before wrapping: we strip the old coating, wash the body, and go over it with polish, otherwise scratches and scuffs show through the film. We tuck the edges behind the panel edge and heat them with a heat gun until they shrink — the seam doesn't collect dirt and doesn't come loose after the first winter. Ask whether they polish the body before wrapping and whether they tuck the edge behind the panel edge — if the answer to these two questions is "not necessarily," look for another service.
We've put together what determines the result of a carbon wrap: the choice of material, body preparation, edge work, timelines, and warranty obligations. Below is a short summary for those ready to book.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost depends on the size of the car, complexity of surfaces, and the chosen type of carbon. Basic coating of individual elements (mirrors, spoiler) starts from 10,000 tenge. Full coating of a sedan — from 180,000 tenge, an SUV — from 250,000 tenge. The exact price can be quoted after inspecting the car, as it depends on the number of parts, need for dismantling, and body condition.
The time depends on the volume of work. Coating individual elements (e.g., hood or mirrors) takes 1-2 days. Full coating of a car — from 3 to 7 days. The duration is influenced by the complexity of surfaces (bumpers, sills), the need to remove parts for quality wrapping, and body preparation. We quote exact timeframes after evaluation and always strive to meet the agreed period.
Yes, we provide a warranty on all types of carbon coatings. The warranty is 24 months(film or liquid carbon). The warranty covers peeling, bubbling, and fading under proper use. We record warranty obligations in the contract so you can be confident in the quality.
Yes, an appointment is required because carbon coating requires preparation and takes several days. You can book by phone or via messengers. We will find a convenient time, and you won't have to wait. If there is an urgent need, let us know — we will try to find an opportunity and complete the work faster.
Yes, you can bring your own materials. However, we are responsible only for the quality of work, not for the properties of materials. If you use your own film or compound, the warranty on the coating does not apply. We recommend trusting our materials, which we have tested in practice and provide a warranty on.
If you notice defects after the work is done, inform us within the warranty period. We will fix the defects free of charge if they occurred due to our fault. If defects are found after self-intervention or violation of operating conditions, the warranty may not apply. We always meet halfway and resolve issues promptly.
The main options: carbon film (vinyl with carbon texture or real carbon) and liquid carbon (polyurethane coating applied by spraying). Film is a wrap over the surface, it can be glossy or matte, thickness varies. Liquid carbon creates a more durable layer resistant to chips and can be applied to complex shapes. There is also 3D carbon and hydrographics — these are imitations of carbon. The choice depends on your goals: protection, appearance, or budget.
In the first 2-3 days after application, avoid washing the car so the coating fully sets. After that, washing can be done with regular products, but preferably without aggressive chemicals and high pressure on the seams. Use soft sponges and microfiber. Polishing the coating is possible, but only after consulting with us. If you follow the recommendations, the coating will last long and maintain its appearance.
Payment is made after inspecting the body and agreeing on the scope of work: cash, card, or bank transfer. The cost depends on the area of elements being treated, the condition of the paintwork, and the need for preliminary preparation — washing, degreasing, and polishing. The application work takes from one to several days depending on the number of zones.
Carbon coating, unlike tint film, does not reduce light transmission and is not tinting. Its main task is to protect the body from chips, scratches, and give a carbon texture. Tint film is designed to darken windows. Carbon film is thicker and stronger, has a textured pattern, and liquid carbon creates a durable protective layer. These are different types of coatings with different functions.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
I came with a 2018 Toyota Camry, the body was covered in terrible holograms after a cheap car wash. The guys did polishing and applied carbon. The car looks like it just came from the showroom! Price 65,000 tenge, one day turnaround — everything was clear, no pushy services. I recommend!
I had carbon coating done on my Kia Sportage. I was very afraid that after winter there would be stains from reagents, but the specialists removed everything. Now the body shines and water rolls off in beads. Price 58,000, done in one day. Thanks to CARGID!
I gave my car for carbon before selling. I wanted the car to look fresher and the buyer not to haggle. The result exceeded expectations: the body became mirror-like, scratches disappeared. Sold within a week, recouped the coating with interest. Price 72,000 tenge.
Lexus LX 570, a large SUV, got some chemical stains over the winter. The service did a deep cleaning and carbon. It cost 120,000, but now it's easier to care for the car: less dust sticks, washing is faster. Took two days, everything on time.
My car is a Toyota RAV4. I had carbon coating done, the exterior became shiny, and all small scratches disappeared. The service is fast, high-quality, I paid 60,000 tenge. I recommend to everyone!
On my Volkswagen Polo I had carbon done for taxi work. The car is constantly on the move, scratches appear often. After the coating, the body became more resistant to minor damage, washing takes less time. 55,000 tenge, done in a day. Reasonable money for this.
I got carbon on my Hyundai Tucson. I thought it was just polishing, but it turned out the coating really protects from branches and stones. After a month of use, not a single new scratch on the body. Price 68,000 tenge, done in a day. Happy!
I contacted CARGID with a problem: after removing the tint film on the hood, glue marks remained, the body looked terrible. The specialists polished and applied carbon coating. Now the color is even, the shine is crazy. Price 85,000 tenge, the result is superb. Thank you!
I spent a long time choosing where to get ceramic with carbon on my Skoda. I settled on CARGID based on a friend's recommendation. No regrets. For 70,000 tenge I got excellent protection from reagents and minor scratches. I've been driving for a month — the body is clean, washing is quick. Respect to the team!
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.