Comprehensive body wash with subsequent polishing — an effective way to restore your car's presentable appearance. We remove scratches, scuffs, and give a deep shine. We work with various types of paint coatings, guarantee lasting results and protection from external influences.
Ceramic coating application (multilayer, up to 3 layers, SUV)
2–3 days
from 90,000 ₸
Rain repellent for glass (treatment of all glass)
1–2 hours
from 8,000 ₸
Urgent wash and polishing (mobile service, waiting in queue)
2–4 hours
from 15,000 ₸
Mobile wash and polishing at home/office (within Almaty)
from 3 hours
from 20,000 ₸
Prices are starting from the minimum and depend on the condition of the body, body type, and desired result. The exact cost is estimated by a specialist after inspecting the car at any of our locations. Warranty periods — see the page «Warranty»
06
Why they choose washing and polishing at CARGID
Why us.
Every promise — backed by a number or a document: work order, photos, removed parts.
12YRS
in the auto service — 9 000+ cars, technicians with 9–18 years of experience.
Wax application
Deep cleaning
Rain repellent
01
3-Stage Wash
First, we knock off dirt with foam, then hand-wash with two buckets, then dry with a turbine. We don't drag abrasive over the body, so we don't leave spiderweb scratches.
02
Engine Without Risk
We wash with steam at pressure up to 6 bar and cover control units with film. It starts after washing just as before — not a single failure.
03
Headlight Polishing in 40 Minutes
We sand with 800–3000 grit and polish with a UV-protective paste. The headlights don't get cloudy and shine evenly, not as a yellow spot.
04
Liquid Glass for 6 Months
We apply the ceramic compound in two layers at 20–25°C. Dirt doesn't stick, and washing takes half the time.
07
How washing and polishing are performed
Steps.
We explain step by step: from the request to the moment you pick up your shining car.
01
Vehicle Acceptance
You submit a request by phone or WhatsApp, stating the make, model, and desired visit date. The technician inspects the body in your presence, records existing chips, scratches, and dirt, and agrees on the scope of work.
request on WhatsApp
02
Initial Wash
We wash off the main dirt and sand using a touchless method so as not to damage the paintwork during further work.
we'll agree on a time
03
Body Chemical Cleaning
We remove tar spots, insect marks, and stubborn dirt with special compounds.
on-site inspection
04
Wash with Auto Shampoo
We hand-wash the car with a soft sponge using high-quality auto chemicals, thoroughly washing joints and cavities.
list price
05
Body Polishing
Using a polishing machine and abrasive pastes, we remove surface scratches and give a deep shine.
result in hand
06
Final Drying
We apply a protective wax or polymer that makes future washing easier and protects against UV. We dry the body with microfiber, remove streaks, check the polishing quality, and return the keys.
Car service in Almaty. We reply on WhatsApp and by phone.
5 000 ₸Body wash
10 · Useful
Professional Car Wash and Polishing in Almaty by CARGID
Author: Аружан А.detailing specialist (mobile), 11 years of experience
Published Updated
CARGID in Almaty provides car wash and polishing by appointment, no waiting in line. We wash the body in three stages, clean the engine with steam up to 6 bar while protecting the control units, polish the body and headlights, and apply liquid glass. You get a written estimate first, a 30-day warranty on washing and polishing, and 24 months on ceramic — all stated in the work order.
What Types of Car Wash and Polishing Exist and How to Choose Based on Your Car's Condition
Three scenarios — restorative polishing, protective polishing, and ceramic coating. The choice depends on the condition of the paint, not on wanting a "shinier" look. Below we explain how to tell these services apart and what happens if you pick the wrong one.
Restorative Body Polishing vs Protective Polishing and Ceramic
This treatment removes a layer of clear coat with abrasive paste and eliminates scratches and swirl marks. Protective polishing only covers the surface with a polymer, while ceramic provides a hard protective layer. We work with three pastes — coarse, medium, and finishing — on different pads: the coarse one removes defects, the medium one removes marks left by the coarse, and the finishing one restores color depth. On soft Japanese paints the order is the same, but the machine speed is lower and pauses between passes are longer. If the body is dull with swirl marks, protective polishing without restorative will simply seal the defects under a layer — after a couple of service visits they will reappear, so restoration comes first, then protection. The difference is visible at intake: the technician runs a hand over the panel and shows the boundary between the dull area and the live shine — so the client understands which type of treatment their car needs.
When Polishing Won't Help and Painting Is Needed
Scratch down to primer: your nail catches on the edge — the entire top layer is gone, abrasives won't help; local painting with color matching is required.
Scratch down to metal: gray or dark streaks are visible, edges rust — polishing will only widen the area; the part is repainted entirely.
Thin coating after repainting: the thickness gauge reads below normal — abrasive polishing is done at low speed with coating thickness control.
Repainted body: the factory layer and the repair layer differ in hardness, so the machine is moved slower, otherwise the coating wears down to the primer.
Matte or peeling surface: the coating is already destroyed, restoration gives no result — preparation and painting in a booth are needed.
How Many Times Can You Polish a Car and Is It Harmful to the Clear Coat
Coating reserve: abrasive polishing removes microns of clear coat, so we do it no more often than the thickness allows — we measure before starting work.
Restoration based on condition: we take on such treatment only where there is still reserve, not "just in case".
Protection between restorations: liquid glass or protective polishing does not wear away the clear coat but takes on dust, sun, and minor scratches.
Protection effect: liquid glass extends the even appearance of the body without new abrasive.
Warranty: the term and conditions are recorded in the work order when the car is handed over.
How Car Washing Is Done and What Preparation Before Body Polishing Includes
Washing before polishing is not just "wash and wipe" but a mandatory preparation step: on a dirty body, the abrasive drags sand across the clear coat. We break down the procedure and the services ordered separately.
Three-Stage Wash and Why You Can't Polish Without It
Our car wash and polishing in Almaty starts with three-stage body preparation: first we knock off dirt with active foam, then hand wash with two buckets, then dry with a turbine — and only after that can abrasive touch the clear coat. Two buckets are needed to avoid dragging sand back onto the body: one for rinsing the mitt, the other for clean solution. The turbine blows water out of seams, mirrors, and moldings, so degreasing before polishing goes on evenly and leaves no streaks. Body polishing begins with this preparation. You don't need to arrive with a pre-washed car: while the car is on the way, dust settles on the clear coat, and the technician still performs the preparatory wash — otherwise the pad works like sandpaper on sand.
What's Included in the Comprehensive Wash and What's Ordered Separately
what's included in the package and what's separate
Service
Included in comprehensive wash
Ordered separately
3-stage body wash
yes
—
Underbody and arch wash on lift
yes
—
Plastic and vinyl treatment
yes
—
Tire blackening
yes
—
Interior deep cleaning
no
yes
Steam engine wash
no
yes
Body and headlight polishing
no
yes
Liquid glass
no
yes
Steam Engine Wash and Car Polishing Without Risk to Electronics
Engine washing is the procedure that most often causes a car to "not start." We show how we work with steam, what we cover with film, and how we check the electronics afterward.
How We Steam Clean the Engine and Protect Control Units
We steam clean the engine with pressure up to 6 bar and cover the control units with film, then after the procedure we check starting and electronics operation with a scanner. The machine delivers steam, not a pressurized water jet: softened dirt and oil come off the surface without penetrating connectors and wiring harnesses. Before starting, the service advisor inspects the engine bay, notes the location of the units, and covers everything sensitive to moisture with protective material. Steam doesn't flood connectors with a high-pressure jet but dissolves contaminants more gently — the risk of damaging electronics is lower, but a protective layer on the units is still mandatory, especially on engines with tight engine bay layouts. Tight layout is the main reason you can't skimp on covering. Car body polishing is performed separately from engine washing so that moisture and abrasives don't overlap at the same stage.
Post-Treatment Check After Engine Cleaning
Scanning: we run the electronics with dealer scanners for 40+ brands and check for any errors.
Starting and operation: we start the engine, listen to idle, check throttle response and real-time sensor readings.
Warranty by type of work: the term and conditions are recorded in the work order so there's something to refer to if any question arises.
Free diagnostics: if the check engine light does come on, we handle the case under warranty at no charge — no "you flooded it, you fix it" arguments.
Photo report: we photograph the units before and after, show what was covered with film and the condition of the connectors.
Timelines and Warranty for Car Polishing After Washing and What to Do About Disputed Defects
Timelines and warranty are what the client wants to see on paper, not hear as words. We show how long each procedure takes, what warranty period we give, and how we document the clear coat condition before and after.
How long wash and polishing take
time guidelines for different procedures
Procedure
Stages
Time guideline
3-stage wash
foam, hand wash, turbine dry
within the visit
Steam engine wash
steam up to 6 bar, units protected with film
within the visit
Headlight polishing
sanding 800–3000, UV-protective paste
about 40 minutes
Restorative polishing
abrasive pastes, RPM control
depends on clear coat condition
Liquid glass
two-layer application
depends on area
Warranty for polishing and ceramic in the work order
We give a 24-month warranty on ceramic, 30 days on headlight polishing, and we record the term and conditions in the work order and the completion certificate when the car is handed over. Body repair, painting, rustproofing, and protective film also come with a 24-month warranty; oil changes, brakes, suspension, and tire service — 6 months. The warranty covers the procedures performed and the materials installed, but does not cover accidents on the way from the shop, third-party interference, or natural wear of consumables. Diagnostics for a warranty case is free of charge. In our practice, disputes are most often resolved by the certificate: it states when and what was done. Read the terms before leaving the shop — it makes it easier to understand where the technicians' responsibility ends.
What to do if a "new" scratch appears after polishing
Check against the photo report: we photograph key stages, so the clear coat condition before and after polishing is visible.
Handover with the technician: the service advisor receives the car and manages the work order until handover, recording defects on arrival.
Follow-up inspection: if a scratch raises questions, show it at handover — we'll compare it with the records and photos.
Dispute based on documents: the condition at intake and the work order resolve the issue without guesswork on either side.
Warranty diagnostics: inspection for a warranty case is free, so you can check the defect at no cost.
Headlight polishing and liquid glass after car wash and post-service care
Headlights and body protection are the two scenarios most often ordered together with polishing. We explain how we restore headlight clarity, apply liquid glass, and care for the body after the work.
Headlight polishing in 40 minutes with UV protection
Sanding: we treat the plastic with 800–3000 grit sandpaper, removing the clouded and yellowed top layer.
Polishing: we finish the surface with a UV-filter paste so the plastic doesn't cloud again.
Time: a pair of headlights takes about 40 minutes, and you can pick up the car the same day.
Result: even, bright light without a yellow spot or scattering on wet asphalt.
Check: we turn on the headlights and check the beam pattern for evenness.
Durability: a paste with a sun filter extends the result, whereas polished plastic without such protection clouds faster than factory — this is especially noticeable in bright light.
Two-layer liquid glass and when you can wash the car
We apply liquid glass in two coats at 20–25 °C, and the car shouldn't be washed right away so the coating has time to cure. The first pass is spread across the body and left to flash off; the second goes on in a crosshatch pattern so the coating lays down evenly with no gaps at the panel seams. The ceramic coating fills the micropores in the clear coat and acts as a barrier against dust, water and light road chemicals. A freshly applied layer is best left for a few hours indoors, away from dust — outside, settling grime will ruin the surface. The coating keeps hardening for the first day. For the first wash, use a gentle soap labeled non-abrasive: a stiff brush at a car wash strips the protection faster than dust and sun do, and the effect wears off sooner than the promised months.
Booking, intake, and body care after the work
We work by appointment for wash and polishing, no queues; the service advisor receives the car and manages the work order until handover, and you can bring your own materials — we agree on their use in advance. Working hours are daily 09:00–20:00; before handover we do a test drive and show the result in the light. The protective layer on the body lasts longer if you don't wipe it with a dry cloth: in Almaty, the clear coat dulls fastest from dust and sun, so it's enough to rinse off dust with a mild chemical — this way the protective layer lasts longer and the spiderweb scratches don't return. Restorative body polishing gives a noticeable result on scratch depth, but the protection is renewed based on the coating condition so the clear coat doesn't settle.
Wash and polishing: what to know before booking
We've gathered the key things to keep in mind before booking a wash and polish, so the result matches expectations and you don't have to redo the work.
The type of polishing is chosen based on the clear coat condition. Restorative removes scratches and spiderweb, while protective and ceramic cover the clear coat and take on dust and sun.
Polishing does not replace painting. If a scratch has reached the primer or metal, only painting can restore the look, not abrasives.
Preparatory washing is mandatory. On a dirty body, the abrasive drags sand across the clear coat, so a three-stage treatment is part of polishing, not a separate "wash".
Steam engine washing is safer than a pressure jet. Control units are covered with film, and electronics are checked with a scanner after the work.
Warranty and timelines must be on paper. The term, conditions, and warranty boundaries are recorded in the work order and certificate, and the body condition — in a photo report before and after the work.
11
Frequently asked questions about car washing and polishing in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The cost depends on the size of the car, the degree of contamination, the type of body and the chosen package. Basic body wash — from 5,000 tenge, comprehensive wash with carpet and tire blackening — from 7,000 tenge. Abrasive polishing — from 25,000 tenge for a C-class car, protective polishing from 15,000 tenge. For SUVs and minivans, the price is 20–30% higher. We quote the exact price after inspection, free of charge.
Body wash — 30–40 minutes, comprehensive wash (with carpet, door jambs, trunk) — 1–1.5 hours. Abrasive polishing takes 4–8 hours depending on the condition of the paintwork and the size of the car. Protective polishing (applying the compound) — 2–3 hours. If polishing is combined with washing, the time increases by the wash. We quote the exact time before starting work, usually on the day of booking.
If defects appear during the warranty period due to violation of technology, we fix them free of charge. The warranty does not cover mechanical damage (scratches, chips) and improper aftercare.
For washing, booking is not mandatory, but if you want it fast and without a queue, it's better to call and reserve a time. For polishing, booking is strictly required — it's a long procedure, and free slots are not available every day. Book polishing 1–2 days in advance, washing — 30 minutes in advance. You can leave a request via WhatsApp or by phone, we will confirm the time.
Yes, it is allowed to use your materials if they are suitable for the type of paintwork and do not contain abrasives that damage the coating. In that case, we warn that responsibility for the result is reduced — if the product turns out to be of poor quality, we do not provide a warranty. We usually advise using our professional compounds (Koch Chemie, Sonax, etc.) — they are tested, and we are responsible for the result. When using your own materials, the price does not change, but if additional time is needed to adjust the mode, an extra charge is possible.
If you notice scratches or chips that were not there before, provide a photo or video recorded before the work started, and we will resolve the issue. Important: after polishing, we conduct a control inspection together with you and record the condition, so disputed situations are rare.
Abrasive polishing — restoration of the paintwork: removal of scratches, scuffs, holograms, leveling the gloss. Requires sanding, removes a thin layer of varnish. Protective polishing — application of a compound (wax, polymer, ceramic) on the paintwork to protect against ultraviolet, reagents, light scratches. Does not remove deep defects. Ceramic — long-term protection (up to 12 months), creates a hard layer, hydrophobic effect, requires preliminary abrasive polishing. The choice depends on the condition of the body and goals: if you need to remove scratches — abrasive, if you just want to protect a new car — ceramic or wax.
In the first 48 hours after polishing, avoid washing, especially contactless with aggressive chemicals — let the compound set. After ceramic — do not wash the car for 7 days and do not use shampoos with wax. Then washing with neutral shampoo and a soft sponge, without brushes, is recommended. Use finishing sprays to maintain hydrophobicity. Avoid frequent automatic washes with active chemicals — they destroy the protective layer faster. The optimal washing frequency is once every 1–2 weeks. After polishing, try to park in the shade so that ultraviolet affects the protective layer more slowly.
Payment is made in cash or by card at the service cash desk after accepting the car. For polishing work, the cost depends on the body size, the condition of the paintwork and the chosen type of polishing — protective or abrasive. The final amount is agreed before the start of work, no additional payment is charged after completion.
Comprehensive wash includes: body wash with shampoo, drying, cleaning carpet and interior with a vacuum cleaner, wet cleaning of plastic, applying protective polish to panels, blackening of tires and rubber seals, washing door jambs, sills, trunk and bumper. For polishing (abrasive or protective), the price includes only the preparatory body wash, we do not touch the interior. If you need interior polishing or chemical cleaning — this is a separate service, it is not included in the wash+polish package. Please clarify when booking.
12
What clients say about our wash and polish
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Dmitry
Kia Rio
I brought my Kia Rio after winter — covered in scratches from sand. The guys did the polishing for 18 thousand, it really became like new. The body shines, everything is precise. Happy as an elephant, now only to you.
Timur
Toyota Camry
Had washing and polishing done on a Toyota Camry. I liked that they accepted without an appointment and explained everything in detail. The price was 25 thousand, they spent a whole day, but the result was worth it. The car looks like it came from the showroom, all small scratches were removed.
Aigerim
I ordered headlight polishing on my Lexus RX300. The headlights were completely cloudy, the light was dim. They did it for 12 thousand, now they shine like new. Thanks for warning about the protective varnish — that's important.
Serik
Kseulerli, I am satisfied with the quality of work. They did everything carefully, the car came out as if new. Next time I will come again.
Maxim
The driver started the winter and couldn't wash off the bitumen stains on his Honda Pilot. The guys from CARGID did chemical cleaning, polishing and wax for 22 thousand. The bitumen was completely removed, the body is shining. I recommend!
Olga
CX-5
They polished my Mazda CX-5 after the kids scratched the sides. The result exceeded expectations: the scratches are almost invisible, the color became deeper. Paid 20 thousand, the deadline was met. Thanks!
Alexander
I rented a car, and it had field stains. I brought it for washing and polishing — for 15 thousand everything was cleaned, the body is now mirror-like. Very fast and high quality. I liked everything.
Zhanna
I want to thank you for polishing the body of my Audi Q7. The car was in terrible condition after a long winter. They did everything quickly, in 5 hours I picked up the car with a perfect shine. The price of 35 thousand is inexpensive for such a result.
Igor
I ordered washing and polishing for a Nissan X-Trail before selling. The guys did everything at the highest level: the body became like new, they even masked the chips. Sold it in a week, thanks for the preparation!