Authorexperience

Extend the lifespan of your Ford's manual gearbox: Mondeo, Focus, Kuga, EcoSport, and other models. We change the manual transmission oil according to the manufacturer's schedule, with level control and leak inspection. We use recommended oils and original or a verified equivalent of your choice, and provide a warranty of 6 months.
Full list of services for Ford manual transmission oil change and related transmission components.

We drain the old oil, flush the sump, and fill with new oil to the specified level. The client gets a clean gearbox with the correct lubricant level.

We replace the manual transmission input shaft seal to stop leaks and protect the clutch from oil. The client gets a dry gearbox with no drips.

We replace the manual transmission output shaft seal to eliminate leaks along the output shaft. The client gets a sealed unit with no oil loss.

We replace the manual transmission pan gasket, clean the mating surfaces, and tighten to torque. The client gets a dry pan with no leaks.

We drain the old oil and fill the transfer case with new oil to the correct level. The client gets a properly functioning all-wheel drive and quiet transfer case operation.

We change the oil in the rear or front differential, check the level and condition of the seals. The client gets a quiet differential with no humming or leaks.

We drain the old oil, replace the filter, and fill with new oil to the specified level. The client gets a clean engine with the correct level and pressure.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
The cost of work depends on the car model and oil type. We will provide the exact price after diagnostics.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Manual transmission oil change (with customer's oil) | 1 hour | 6 mo | from 5 000 ₸ |
| Manual transmission oil change (with standard oil) | 1 hour | 6 mo | from 8 000 ₸ |
| Manual transmission oil change (with premium oil) | 1 hour | 6 mo | from 11 000 ₸ |
| Manual transmission flushing during oil change | 1–2 hours | 6 mo | from 3 000 ₸ |
| Manual transmission input shaft seal replacement | 2–3 hours | 6 mo | from 7 000 ₸ |
| Manual transmission output shaft seal replacement | 2–3 hours | 6 mo | from 7 000 ₸ |
| Manual transmission pan gasket replacement | 1–2 hours | 6 mo | from 4 000 ₸ |
| Transfer case oil change | 1 hour | 6 mo | from 7 000 ₸ |
| Differential oil change (rear/front) | 1–2 hours | 6 mo | from 6 000 ₸ |
| Engine oil change (customer's oil and filter) | 1 hour | 6 mo | from 3 000 ₸ |
| Engine oil change (with oil and filter) | 1 hour | 6 mo | from 8 000 ₸ |
| Power steering fluid change | 1 hour | 6 mo | from 5 000 ₸ |
| Automatic transmission oil change (partial) | 1–2 hours | 6 mo | from 8 000 ₸ |
| Automatic transmission oil change (machine) | 2–3 hours | 6 mo | from 15 000 ₸ |
| Removal and installation of crankcase protection | 30 min | 6 mo | from 2 000 ₸ |
The cost is for labor only, excluding the cost of oil and filters. A 10% discount is provided when ordering comprehensive maintenance. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We pump out the old oil through the drain hole with a pump, then add 200–300 ml of fresh oil and circulate it — this washes away sediment from the bottom of the pan.
If the input or output shaft seal is seeping, we replace it immediately: otherwise, new oil will escape through the gap in a couple thousand kilometers.
We fill strictly according to the dipstick mark or fill plug, without overfilling. Overfilling squeezes out the seals, underfilling kills the synchronizers.
We give a year on oil and seal replacement work: if a leak appears in the same place after seal replacement, we will redo it at our own expense.
Here's how the manual transmission oil change for your Ford is performed at our service center.

You submit a request on the website or by phone, and we find a convenient time for your visit. We receive the vehicle, record the mileage and condition, and agree on the scope of work.
request on WhatsApp
We check the oil level and condition, and inspect the gearbox for leaks.
inspection and diagnosticsWe unscrew the drain plug, drain the used fluid, and assess its condition.
estimate before work starts
We remove the oil pan, clean it and the magnets from metal shavings.
work to factory procedureWe pour fresh oil meeting Ford specifications through the inspection hole.
result check
We set the correct oil level, start the engine, and check for leaks. We finalize the work order, provide recommendations for further operation, and hand over the keys.
warranty in the work orderWalk-ins welcome. By appointment — no queue.
CARGID car repair team. 8–17 years of experience.
Author
Mobile auto electrician

Car alarm and car stereo installer

Auto electrician

Roadside assistance technician

Diagnostic technician

Engine mechanic (cylinder head repair)

Auto electrician and diagnostician

Write to WhatsApp with the make, year and what's bothering you. We'll tell you the cause, a price estimate and pick a time for your visit.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

CARGID changes the oil in Ford manual transmissions in Almaty: we pump out the old oil, refill strictly to the mark, and replace the seals right away if there's a leak. A 6-month warranty is written into the work order. We start with diagnostics and a written estimate, and begin the work only after you approve it.
The oil volume and spec for a Ford gearbox depend on the model and the unit type — IB5 or MTX-75. Below is a summary for common cars, then how we pick the oil for a specific vehicle.
| Ford Model | Gearbox Type | What We Check When Selecting |
|---|---|---|
| Mondeo 3 | MTX-75 | gearbox type, spec, seal condition |
| Focus 2 / 3 | IB5 | volume to the mark, 75W-90 GL-4 spec |
| Kuga / EcoSport | IB5 / MTX-75 | drivetrain, transfer case and final drive |
We select the oil by Ford specification and gearbox type — for a Ford Mondeo 3, the manual transmission oil change follows the MTX-75 spec, for Focus 2/3 it's IB5. If you bring your own, the service advisor checks the viscosity and spec against the manufacturer's requirements before pouring: a mismatch with 75W-90 GL-4 or another class doesn't show up right away. In practice, the wrong fluid makes itself known after thousands of kilometers — synchronizer crunch when cold and stiff gear engagement. That's why when servicing Ford manual gearboxes we don't pour "by eye" and don't rely on generic advice from the internet. OEM, aftermarket, or your own canister — the choice is yours, and we check compatibility and fill strictly to the mark.
Some Fords have no drain plug in the manual gearbox, or the subframe blocks access to it — so we pump out the old oil instead of "draining it however it comes out."
We pump out the used fluid through the drain hole, then add 200–300 ml of fresh oil and run it through — this washes out the sediment from the bottom of the pan. A pump with a flexible tube reaches the lowest point of the crankcase even where a normal drain isn't possible, and the fresh flush picks up the sludge that settled over tens of thousands of kilometers. We flush the pan separately if a thick layer is visible on the bottom during pumping. A simple pump-out without a flush leaves dirty sediment that quickly contaminates the fresh fluid — so the flush is part of the job by default. A Ford manual transmission oil change in Almaty done this way works without a drain plug and without the risk of leaving old sludge in the crankcase. In my opinion, it's the flush that separates a proper procedure from a superficial one: the client sees a clean canister at the end, and the gearbox gets fresh lubricant without the old sludge.
We fill the lubricant strictly to the dipstick mark or fill plug, without topping up above it — overfilling pushes out the seals, underfilling kills the synchronizers. We check the volume against the check hole: as soon as the lubricant starts coming out, we stop filling and pump the extra milliliters back out. After a short run on the lift, we recheck the level once more — some of the lubricant goes into the channels and onto the crankcase walls, and the first mark can be misleading. On models with a dipstick we check by it; on versions without one we go only by the fill and check plugs, not by the amount in the canister. We also inspect the shaft seals: fresh lubricant under pressure reveals an old leak faster, and it's better to catch it on the lift than on the highway.
Leaking seals or a leaking pan are a common reason a fresh oil change doesn't last: the fluid goes out and the unit runs starved. Here's what we replace right away and why we don't put it off.
If the input or output shaft seal is seeping, we replace it right away during the service — otherwise the fresh lubricant will be gone through the gap in a couple thousand kilometers. On the lift we inspect both seals and their seats: sweating at the joint with the engine shows up as an oil film and a burnt smell. Work on the input shaft seal requires removing the unit, while the output shaft seal is done after removing the driveshaft, so the timing and scope of work differ. A postponed repair costs more: you pay for the lubricant twice and risk a dry gearbox on the road. That's why during the inspection we name right away which seal needs replacing and show it to the client on the lift. In my opinion, it's cheaper to stop the leak on the lift than to catch a tow truck on the highway with a seized transmission.
When we remove the pan, we install a new gasket and check the magnet — it collects metal shavings that show wear in the mechanism. The gasket hardens over time and starts letting lubricant through at the joint, so we install a new part instead of the old one rather than resealing the old one with sealant. We inspect the magnet separately: large shavings and a "coat" of fine dust mean different things — dust is acceptable, large particles are not. Metal found is a reason to check the mechanism deeper, not just wipe the pan and pour in fresh lubricant. In our experience, it's this inspection that catches beginning gear wear before it shows up as crunching when shifting. We show the client the old gasket and the removed magnet so it's clear what was replaced.
The lubricant in a manual gearbox ages quietly: it doesn't burn, doesn't go into the engine, and doesn't smoke out of the exhaust. Here's how many kilometers to go before refreshing it at Almaty's pace of driving, and which signs mean it's time to come to the shop.
Under normal conditions the fluid in a Ford manual gearbox lasts 60–80 thousand km, and in traffic the interval is shortened to 50–60 thousand km. In summer on the avenues and bridges the gearbox runs for hours in first or second gear: the clutch slips, the fluid heats up to 100–110 °C and loses viscosity faster than during steady highway driving. Short city trips — from home to work and back — don't let the unit reach operating temperature at all, so condensation builds up in the pan and mixes with what's in the crankcase. Constant starts and short trips heat the gearbox unevenly — the fluid ages faster than the mileage shows. If you mostly drive downtown and during rush hour, check its condition every 40 thousand km instead of waiting for the number on the odometer. A timely oil change in a Ford manual transmission extends the life of the synchronizers and shaft bearings.
Below is how we take in the car, what we record in the documents at handover, and how to keep the warranty if you bring your own oil for the gearbox.
We give a 6-month warranty on a manual transmission oil change and record the term and conditions in the work order and the completion certificate when the car is handed over. The service advisor prepares the documents: they list the type of work, the amount of lubricant filled, and the date from which the warranty period is counted. The warranty covers the work itself and the parts we install — seals, the pan gasket, if they were replaced along with the fluid. It does not cover an accident after the repair, interference by third parties, or a part brought by the client. Warranty diagnostics are free with us: if a noise or leak appears after service, the technician will lift the car on the hoist and find the cause without charging for the inspection. In my view, a written certificate with the conditions matters more than verbal promises — it shows exactly what was done and when, if the gearbox behaves differently a couple of months later.
We're open daily 09:00–20:00, seven days a week, by appointment — no waiting in line, and you can bring your own canister and keep the warranty on the work. The service advisor handles intake: he inspects the gearbox, records its condition in the work order, and manages the document through to handover, so there are no disputes after the repair. The procedure itself on a Ford manual transmission takes less than an hour, but if we also replace a seal or the pan gasket along with it, the car stays in the shop longer — the technician gives the exact time after the inspection. We accept your own canister on one condition: the contents meet the spec for your model, and we record the receipt and container in the order. In that case the warranty stays on the work but not on the fluid itself — its quality is the supplier's responsibility. Book ahead for the morning: by noon the hoists are busy and the wait gets longer.
Four parameters decide the outcome of a manual transmission oil change on a Ford: the right volume, the drain method, the condition of the seals, and the exact level. Below is a short summary a owner can use to check any shop before booking.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe price of a Ford manual transmission oil change at our service depends on the vehicle model and the type of oil. The cost of labor ranges from 5,000 tenge, depending on the complexity of access to the gearbox and the need to remove the protection. The price also includes replacement of the pan gasket, if required. We give the exact cost after diagnostics, but usually we stay within the specified range. Exact prices are in the price list on this page.
Usually the procedure takes from 1 to 2 hours. It depends on the Ford model (for example, on a Ford Focus with bottom access it's faster, on SUVs removal of the protection may be required) and on the condition of the gearbox. If there are leaks or damage to the pan, the time may increase. We always try to complete the work on the day of contact, and booking in advance will help you plan your time.
The warranty covers the oil change work and the materials used: when using oil recommended by the manufacturer and an original filter (if provided by the gearbox design), we are responsible for the absence of leaks at the drain and fill plugs, as well as for the correct operation of the shifting mechanism. The warranty period depends on the scope of work performed — just an oil change or replacement with flushing and pan removal. If after the procedure extraneous noises or difficult gear engagement appear, diagnostics are carried out free of charge.
An appointment is desirable but not required. You can come to our service without an appointment, and we will try to accept you on a first-come, first-served basis, but during peak hours there may be a wait of up to 1-2 hours. To save your time, we recommend calling and booking a convenient time — this guarantees that the master will be ready to accept you immediately. You can make an appointment by phone or through our website.
Yes, you can bring your own consumables — oil, filter, gasket. However, we are responsible only for the quality of the work, not for the quality of your materials. If you use unsuitable oil, we may refuse the replacement to avoid damaging the gearbox. If you are unsure about the choice, our masters will help you select the correct oil according to Ford specifications, and you can buy it from us or bring your own.
A poor oil change can lead to serious problems: insufficient oil level will cause increased wear of gears and bearings, overheating and gearbox failure. If oil of the wrong specification is poured, it can also disrupt the operation of synchronizers and lead to jerking when shifting. We guarantee that all work is performed according to the regulations, with level control and leak checks. If you notice problems after the replacement, contact us immediately — we will carry out diagnostics and correct mistakes free of charge.
The main differences are in the oil volume, access to the drain plug and the type of oil used. For example, on Ford Focus 2 and 3 with a manual gearbox, the volume is about 2 liters, and the replacement is simple. On Ford Mondeo or Kuga, the volume may be larger (up to 3 liters), and access to the gearbox may be difficult due to the layout. Also, some models (for example, Focus RS) use special oil with increased requirements. We take into account all nuances and use oils recommended by the manufacturer.
Usually Ford recommends changing the manual transmission oil every 60,000–80,000 km, but in urban conditions with frequent traffic jams, it is better to reduce the interval to 50,000 km. Signs that it's time to change the oil: difficult gear engagement, noise during gearbox operation (hum, howl), oil leaks, metal shavings on the magnetic plug. If you notice any of these symptoms, contact us for diagnostics — perhaps not only replacement but also flushing of the gearbox may be required.
Payment is accepted in cash, by bank card and by bank transfer; for legal entities payment by invoice is possible. The cost consists of the volume of oil required for a specific Ford transmission model (for example, IB5, MTX-75, Durashift), the cost of the oil and filter, as well as labor intensity — if there are protective elements or the need to remove the pan, the work takes more time. The exact amount is given after inspecting the vehicle and clarifying the transmission modification.
The pan gasket is often made of cork or silicone, and when removing the pan it is recommended to replace it to ensure tightness. The filter, if present (on some Ford models), should also be changed with every replacement — it retains metal shavings and contaminants. In any case, we always check the condition of the gasket and filter and advise replacement if they are worn. These are small expenses, but they prevent leaks and extend the service life of the gearbox.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
I came to change the oil in the manual transmission of my Ford Focus 2. Before that, the gearbox worked noisily and jerked. The service did everything quickly, replaced the oil and also the gasket. The price was pleasing — 22,500 tenge, other places asked for more. The noise disappeared, gears began to engage clearly. Thank you very much!
To be honest, I changed the oil in the gearbox of my Ford Mondeo here. Previously, reverse gear was hard to engage. The masters checked well, replaced the oil with synthetic, total was 25,700 tenge. Now everything works great, I told my daughters-in-law too. Thanks!
I was satisfied with this service. I changed the oil in the gearbox on a Ford Fiesta. They did it quickly, in one day. I paid 18,900 tenge, that's a normal price. The car stopped having problems with shifting. I recommend!
I went to CARGID because the Ford Transit started popping out of gear. It turned out the oil was like tar! The guys cleaned the pan, replaced the oil and gasket, it cost 27,200 tenge. Now the gearbox works perfectly, I can't even believe it can be fixed so well. Thanks for the quality!
I changed the oil in the manual transmission on my Ford Kuga. I noticed a gasket leak. At the service they quickly found the cause, replaced the oil, gaskets and seal. It became dry and clean. I paid 23,400 tenge, I think it's fair. Excellent approach!
I did a scheduled oil change in the manual transmission on a Ford Fusion. The master said the oil was still normal, but according to the regulations it's better to replace it — so we did. Everything went quickly, I picked up the car the same day. The price was 19,300 tenge, no hidden extra charges. It's nice that they explain everything right away.
I faced a problem: on the Ford Mondeo the gear lever was hard to move. It turned out the oil in the gearbox was heavily contaminated. The service replaced the oil competently, even adjusted the shifting mechanism. Total 25,700 tenge — money well spent, the car became like new. Thanks!
I was very afraid that something serious would be revealed with the gearbox on the Ford Focus. But it was just an oil change. The guys did everything carefully, even showed the old oil so I understood what I was paying for. It came to 22,500 tenge. Now I drive calmly, no strange sounds. I recommend!
I had the manual transmission oil changed on a Ford Fiesta at CARGID. At first I thought I should go to a dealer, but friends recommended this place. No regrets: they did it fast, with quality, poured good oil, price 18,900 tenge. The gearbox runs quietly and smoothly. Thanks for the honesty!
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.