

Toyota Camry interior
- Cause
- Scuffs on the center console and door cards
- Found
- The clear coat on the panels was scratched, and the plastic had faded in the sun.
- Done
- We wrapped the center console, door cards, and sill trim with black carbon film.

Give your interior a sporty character and protect parts from scratches. We use high-quality carbon fiber films and carefully wrap panels, pillars, and sills. We work with dismantling of elements for a perfect fit and final assembly.
Individual parts and interior elements — carefully, with disassembly and on-site fitting.

We remove the part, clean and degrease the surface, wrap it in carbon fiber and put it back. The client gets a smooth part without wrinkles or bubbles.

We wrap buttons, handles and frames: carefully working around curves and cutouts, preserving button travel. The client gets small parts without scuffs or buildup.

We disassemble the console, wrap the panel and frames around the gear lever and control unit, then reassemble. The client gets a seamless look without gaps or misalignments.

We remove four door cards, wrap the inserts and handles, and put them back. The client gets an identical carbon fiber pattern on all doors.

We remove the dashboard, wrap the main section and trim pieces, and cut openings for air ducts and buttons. The client gets a panel without wrinkles on curves.

We remove all interior pillars, wrap them and put them back. The client gets a uniform carbon fiber pattern around the entire interior perimeter.

We remove the headliner, wrap it without seams or skewing, and install it back. The client gets a neat surface overhead without sagging.

Choose the parameters — we'll show a price and time estimate. We'll confirm the exact quote after diagnostics and send the result to WhatsApp.
Labor. Parts and materials depend on make and availability, OEM or aftermarket.
Calculation details go into the message · reply in 5 minutes
See real examples of carbon film wrapping at our service: how we transform car interiors.
Exact prices for wrapping a car interior with carbon-look film in Almaty. Timeframe and cost depend on the scope of work.
| Service | Duration | Warranty | Price |
|---|---|---|---|
| Diagnostics and interior inspection, consultation | 30 minutes | 12 mo | Free |
| Wrapping one part (e.g., sill trim) | 1 hour | 12 mo | from 3 000 ₸ |
| Wrapping small elements (buttons, handles, trims) | 1–2 hours | 12 mo | from 5 000 ₸ |
| Wrapping the center console (without removal) | 2–3 hours | 12 mo | from 12 000 ₸ |
| Wrapping the center console (with removal) | 3–4 hours | 12 mo | from 18 000 ₸ |
| Wrapping door cards (4 pcs.) | from 1 day | 12 mo | from 25 000 ₸ |
| Wrapping the front panel (dashboard) | from 1 day | 12 mo | from 35 000 ₸ |
| Wrapping all interior pillars (A, B, C) | 4–5 hours | 12 mo | from 15 000 ₸ |
| Wrapping the headliner (excluding removal) | from 1 day | 12 mo | from 40 000 ₸ |
| Wrapping the headliner (with removal) | 1–2 days | 12 mo | from 60 000 ₸ |
| Wrapping the trunk (inner panels) | 4–5 hours | 12 mo | from 20 000 ₸ |
| Car interior wrapping (comprehensive, sedan) | 2–3 days | 12 mo | from 120 000 ₸ |
| SUV or minivan interior wrapping (comprehensive) | 3–4 days | 12 mo | from 180 000 ₸ |
| Express wrapping (within 24 hours) | 24 hours | 12 mo | +50% to the cost |
| Mobile team visit in Almaty | 1–2 hours | 12 mo | from 5 000 ₸ |
Prices are for labor with customer-supplied material; film cost is calculated separately. Exact estimate — after vehicle inspection. Warranty periods — see the page «Warranty»
Every promise — backed by a number or a document: work order, photos, removed parts.
warranty on labor — the term is stated in the work order.
We remove parts and heat the film with a heat gun at 60–70°C. Without removal, carbon fiber peels off at the edges within a month.
The first layer is the base, the second is protective lacquer. Double overlap of the seam gives a smooth joint without white lines on bends.
We do the console, door cards and pillars in three working days. Longer if we remove the headliner: the adhesive there takes a day to dry.
If the film bubbles or peels off due to our fault, we will rewrap the part for free. We cover adhesion specifically, not mechanical cuts.
We wrap interior elements with carbon fiber film: from the center console to door cards. We work quickly, carefully and with a warranty.

You submit a request on the website or by phone, and we agree on a time for your visit to the service center. The technician inspects the interior, clarifies the list of elements to be wrapped and assesses the condition of the film.
request on WhatsApp
We offer films with different carbon fiber textures: from glossy to matte, and help you choose one to match your interior.
inspection and diagnosticsWe carefully remove trims, panels and other elements to provide access to all surfaces.
estimate before work starts
We clean and degrease the parts, removing dust and old coatings for perfect adhesion.
work to factory procedureWe cut the film according to templates, heat it and stretch it over the parts, avoiding bubbles and wrinkles.
result check
We put the parts back, check the quality of the wrapping and the reliability of the fastening. We hand over the car, explain the rules for caring for the film and provide a warranty on the work.
warranty in the work orderWalk-ins welcome. By appointment — no queue.
Detailing team. 9–18 years of experience.
Author
Body polishing specialist

Interior deep cleaning specialist

Polishing specialist

Detailing specialist

Send a photo of the damage, the car make and year to WhatsApp. We will give you a price range, the timeframe and help you pick a booking time.
available daily 09:00–20:00CARGID
Car service in Almaty. We reply on WhatsApp and by phone.

CARGID wraps interiors with carbon fiber film in Almaty, removing parts and heating with a heat gun at 60–70 °C. We apply two layers with an overlap seam, so the carbon doesn't peel at the edges and there's no color mismatch. A full interior takes 3 working days, with a 12-month warranty on the work.
Carbon fiber isn't applied to the whole interior at once, but to selected zones. The scope of work determines both the timeline and how the car's interior will ultimately look.
Wrapping preserves the original part, is reversible and doesn't require paint drying, whereas painting changes the surface permanently, and replacement is the most labor-intensive path. Carbon fiber textured film goes on the stock plastic over the factory coating, not instead of it: underneath remains the same panel with the same mounting clips. Painting requires disassembly, primer, drying in a booth and reassembly — and you can't return to the original look afterward. Replacement with a new one costs the most: you need the element itself, its selection by VIN and transfer of all fasteners. Wrapping the dashboard in carbon fiber costs less than painting and replacement and doesn't require drying in a booth. Before work, we degrease the surface and prepare it for adhesion — this determines how the film holds on the edges. It can be removed without traces on the plastic, so this method is suitable if you plan to return the interior to its original look before selling.
Careful work differs from quick work in that interior parts are removed rather than trimming the film in place. This difference determines whether the carbon holds on the edges and whether gaps appear after reassembly.
We disassemble the panel and remove parts rather than trimming the film in place, because without removal the carbon peels at the edges within a month. Dismantling frees the ends and inner radii — that's where a scalpel in place leaves an uneven edge that lifts at the first temperature change. We place the removed part on a table, degrease the entire area, including hidden zones, and only then roll out the sheet with a felt squeegee. We don't break the fasteners: plastic clips are fragile, and rough disassembly crumbles the mounting seats. We replace old clips with new ones — otherwise squeaks and gaps appear after reassembly that weren't there before. Final installation is done in reverse order with photo documentation of each stage, so at pickup you can see exactly what was disassembled. This approach to working with parts explains why carbon fiber interior wrapping in Almaty with us goes without rework and repeated disassembly.
We heat the film with an industrial heat gun at 60–70 °C so it conforms to the part's curves and the adhesive bonds along the entire edge, not just in the center. Carbon fiber sheet stretches poorly when cold: on complex radii of the dashboard and door cards it wrinkles, and the adhesive layer doesn't have time to activate. A heat gun with temperature control maintains the range precisely while a felt squeegee presses the sheet from center to edges. Overheating above this range warps the plastic and leaves glossy spots, so we keep the temperature under control, not "by eye." We degrease the surface before heating — solvent traces can't be removed from warm plastic.
Two fears arise for the owner before interior treatment: a white stripe on the bend and a different shade on parts treated at different times. Both are solved by the material layout scheme and selecting a single batch.
We apply carbon fiber in two layers with an overlap seam — the first layer is the base, the second is protective lacquer, and the double overlap gives a smooth seam without white stripes on bends. The base carries the texture: carbon fiber film for the interior is laid according to the part's template, and on radii the technician heats it with a heat gun at 60–70 °C so the material conforms without tension. The protective layer goes on top with an overlap and covers the base edge — it's the exposed edge that gives a white stripe when the film is trimmed in place. We select the finish for the task: glossy reads like lacquer, matte hides fingerprints on the center console and handles. The protective layer takes minor scratches from rings and keys, so the base texture stays free of wear longer.
Color mismatch can happen if parts are covered from different batches of film, so when working in stages we select material from the same batch and warn you if the shade has changed. We cut the film using part templates — the front panel, door cards, and pillars get pieces from the same roll with a common number, so they age at the same rate in the sun. If the client comes back later to finish the headliner or trunk, the technician compares the new cut with a sample left from the previous roll. Matte textures fade in the sun slower than gloss, but when working in parts the shade is still matched against the sample — this way the joint between old and new parts isn't noticeable, and the difference between them stays within acceptable limits.
The timeline depends on the scope and whether the headliner is removed. Below is how long each group of work takes and what makes up the time from request to vehicle delivery.
A full interior — console, door cards, and pillars — takes us 3 working days, and with the headliner it's longer: the adhesive drying there is a separate stage. We remove the parts, heat the film with a heat gun at 60–70 °C, apply it in two layers with overlap, then reassemble and check the fit in place. Time goes not into the process itself but into surface preparation, drying, and final assembly: crooked edges show up immediately during assembly, so we test-fit each element when putting it back. The difference in timelines is almost never in the film work but in drying and assembly, so it's more efficient to do the headliner in the same visit as the other parts — otherwise the car comes back to the shop twice. Scheduling by time eliminates the queue, and the service advisor manages the work order through to delivery.
| Work scope | What's included | Timeline |
|---|---|---|
| One part or small elements | buttons, handles, frames, one panel | one visit |
| Center console | removal, wrapping, assembly | included in 3 days |
| Door cards, 4 pcs. | set of four parts | included in 3 days |
| Front panel (dashboard) | removal and wrapping of the panel | included in 3 days |
| All interior pillars | set of pillars | included in 3 days |
| Headliner | wrapping and separate adhesive drying | longer than 3 days |
| Trunk | additional area | by scope |
Carbon fiber wrapping comes with a one-year warranty, but it has its limits: one thing is a defect in our work, another is a cut or your own film. We explain what the warranty covers and how to care for carbon fiber.
The warranty on carbon fiber is 12 months; the term and conditions are recorded in the work order and the completion certificate, and diagnostics for a warranty case are free. If bubbles, creases, or peeling along the edge appear within a year, that's our case — we re-wrap at our own expense. The warranty covers the work and our materials but does not cover mechanical cuts, accidents, or film brought by the client. We apply client-supplied film using the same technology, but the quality and adhesion are the responsibility of the material supplier. Cheap films tend to shrink and fade prematurely. Before buying your own film, match the batch with what's already installed in the interior — otherwise the texture shade will differ on adjacent parts.
Here's a quick summary on carbon fiber wrapping: what affects the result and what to look for so you don't have to redo the interior a month later.
Price, timeframes, warranty, payment — 10 questions asked most often.
Message us on WhatsApp — a service advisor will reply within 5 minutes.
Ask a questionThe cost of carbon interior wrapping at our auto service CARGID in Almaty depends on several factors: the area and complexity of the parts (flat panels are cheaper, dashboard and door cards are more expensive), the chosen material (3M, Hexis or budget Chinese film), the need to disassemble elements (removing panels, handles, air vents). The minimum order is from 5,000 tenge per part (for example, a sill trim). A full interior wrap of an average sedan can cost from 120,000 tenge. We prepare an exact estimate after inspecting the car — free of charge.
Timelines depend on the scope of work. One or two parts (for example, the center console) — from 2 to 4 hours. A full interior wrap of a passenger car usually takes 1-2 days. If disassembly of complex elements (doors, dashboard) is required, the timeframe may increase to 3 days. We always give exact timelines after a preliminary inspection and try to meet the agreed time. We work without days off — booking by phone.
Yes, we provide a 12-month warranty on all types of interior wrapping work. The warranty covers film peeling, bubbling, and color change (if operating rules were followed). Important: the warranty does not apply to mechanical damage (scratches, cuts) or exposure to aggressive chemicals. All warranty obligations are recorded in the contract.
An appointment is preferable, as we guarantee that your car will be accepted at the agreed time and work will begin immediately. We also accept without an appointment, but subject to available slots in the schedule. During the season (spring-summer) the workload is high, so it's better to book in advance by phone or via Instagram. You can come for a free inspection and consultation any day from 9:00 to 20:00.
Yes, you can bring your own film. But in this case we are not responsible for the quality of the material, and the warranty does not cover the film — only the wrapping work (12 months). If you purchase the film from us, the full warranty is 12 months. We recommend trusted brands: 3M, Hexis, KPMF, as cheap films fade quickly and lose their appearance. We will find an option for your budget.
If after the work is completed you find defects (bubbles, creases, peeling) within the warranty period — we redo these areas free of charge. To do this, just call and book a redo. If you have a warranty card, the work is done first. If the defect arose due to improper use (for example, film torn off by a sharp object), this is not a warranty case — the repair is paid separately.
Carbon wrapping is a fast and budget-friendly way to change the interior. Painting parts requires stripping the paint, priming, and takes more time, while replacing with new plastic elements costs several times more. The film imitates carbon, protects the plastic from scratches and abrasions, and is easily replaced. Unlike painting, the wrapping can be removed without traces. At CARGID we use high-quality textured film that is hard to distinguish from real carbon.
After carbon interior wrapping, it is recommended: do not wash the parts for 72 hours so the film adheres well. Afterwards, care is simple — wipe with a soft damp cloth with automotive cosmetics without abrasives. Avoid aggressive solvents, alcohol, and brushes. If the film gets dirty, use a soap solution. Do not expose the wrapped surfaces to prolonged direct sunlight — this may accelerate fading. If these rules are followed, the film will last 3-5 years.
We accept cash, card payments (Visa, Mastercard, Halyk) and cashless payment to an individual entrepreneur's account for legal entities. Private clients can pay by QR code. For orders over 100,000 tenge, a 50% prepayment is possible to reserve time. We issue a receipt for all payments. For cashless payment, an invoice must be issued in advance.
Yes, for quality wrapping of complex parts (door cards, dashboard) we dismantle them at the auto service. We use special plastic spatulas and know how to properly remove clips so as not to break them. When removing, broken or weakened clips are replaced with new ones (included in the cost of work). After installing the parts, we check for absence of squeaks and gaps. This technology allows the film to last longer and looks neater.
We collect ratings on the website and on maps — we hide nothing.
872 reviews on the website
1 900+ ratings in total
I came to CARGID to refresh the interior of my Toyota Camry. Scratches appeared on the center console and they were bothering me. They wrapped everything in carbon, it looks better than new. The price was 45,000 tenge, done in a day. Very satisfied, will recommend.
Came in to wrap the interior with carbon on my BMW 5. They did inserts on the doors and console. Everything neat, no bubbles, the matte film looks expensive. It cost 62,000, took two days. Thanks to the masters!
Wanted to change the interior in my Kia Sportage, the stock gray color got boring. The guys suggested red carbon film, did the console and air vents. Looks fire! The price was fine — 38,000 tenge. Done in one day, I didn't even expect that. Recommend!
On my Mercedes E-class the steering wheel and armrest were worn, the leather peeled off. Showed it at other places, they offered reupholstery for a lot of money. Here they suggested carbon wrapping. They did the steering wheel, armrest and console. In the end I spent 50,000 tenge instead of 150,000. Looks stylish, feels nice to the touch. Thanks!
I had my Hyundai Tucson interior wrapped at this service. I wanted blue inserts for a sporty style. The guys picked the film, did it quickly — in one day, price 42,000 tenge. Everything neat, no bubbles. The car looks more interesting now. Thanks!
After repairs on my Lexus RX there were scratches left on the door cards. At CARGID they suggested carbon film wrapping. They did the door cards, console and sills. Everything perfect, scratches no longer visible. Price 58,000, timeframe two days. Very pleased, recommend.
Oh, everything is great! They wrapped the interior of my Toyota Camry with carbon. The old scratches are gone, the look improved. The price was 45,000 tenge, done in one day. Everything neat, I'm satisfied. Thank you!
My husband gave me interior wrapping for our anniversary. For my Kia Sportage they chose pink carbon film to stand out. They did the console and door trim. It turned out cute, but not vulgar. The masters took all wishes into account. It cost 40,000 tenge, done in one day. Thanks for the patience and neatness!
I had carbon wrapping done on my Lexus RX, wanted to protect the plastic from scratches. I chose matte film, it turned out very practical. The masters recommended exactly that. The work took two days, cost 58,000 tenge. Everything done at a high level, the car looks like it came from the factory. I recommend this service.
Tap the heart if the review helped.
Almaty. daily 09:00–20:00. By appointment — no queue.
Choose a platform — your review will be seen by everyone looking for a car service in Almaty. Mention the work order number in the text.