Give your car's interior a premium look and tactile comfort. Alcantara reupholstery is not only aesthetics but also practicality: the material is wear-resistant, pleasant to the touch, and resistant to temperature changes. Our craftsmen will reupholster parts of any complexity, preserving factory ergonomics and functionality.
Current prices for Alcantara interior upholstery at the CARGID auto service.
Service
Duration
Warranty
Price
Consultation and interior inspection, measurements, material selection
30 minutes
12 mo
Free
Door trim removal (per door)
1–2 hours
12 mo
from 3 000 ₸
Upholstery of one door card in Alcantara
3–4 hours
12 mo
from 15 000 ₸
Front seat upholstery (set)
1–2 days
12 mo
from 40 000 ₸
Rear seat upholstery (set)
1 day
12 mo
from 30 000 ₸
Armrest upholstery (central or side)
2–3 hours
12 mo
from 8 000 ₸
Headliner upholstery (standard sedan)
1–2 days
12 mo
from 35 000 ₸
Headliner upholstery (crossover/minivan)
2–3 days
12 mo
from 50 000 ₸
Pillar upholstery (set: front and rear)
3–5 hours
12 mo
from 12 000 ₸
Dashboard upholstery
2–3 days
12 mo
from 60 000 ₸
Steering wheel upholstery
3–4 hours
12 mo
from 12 000 ₸
Overhead console with sunroof upholstery
4–6 hours
12 mo
from 15 000 ₸
Sun visor upholstery (pair)
1–2 hours
12 mo
from 6 000 ₸
Trunk lid upholstery (inner side)
2–3 hours
12 mo
from 8 000 ₸
Surface leveling and preparation for Alcantara (per 1 m²)
1–2 hours
12 mo
from 2 000 ₸
Express upholstery (priority execution, from 1 day)
1–2 days
12 mo
from 100 000 ₸
Specialist visit to home/office for inspection and measurements
1–2 hours
12 mo
from 5 000 ₸
Mobile upholstery (specialist with materials, within Almaty)
1–4 days
12 mo
from 150 000 ₸
The exact cost depends on the condition of the interior, the selected material, and the body type. The final price is fixed after a free inspection. Warranty periods — see the page «Warranty»
06
Why people choose Alcantara interior reupholstery at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
12MO
warranty on labor — the term is stated in the work order.
Door card reupholstery
Parcel shelf reupholstery
More than 30 Alcantara colors
01
We stretch at 60 °C
We heat the material with a heat gun to 60 °C — the Alcantara stretches. This way we cover without wrinkles or creases on the seats and pillars.
02
3 layers on the headliner
We apply glue, foam, and Alcantara. Three layers hold their shape for years and prevent the sagging that owners fear.
03
Steering wheel and panel — 1 day
We cover the steering wheel and dashboard in one day. We only remove the steering wheel, so the car leaves the same evening.
04
12-month warranty on seams
We cover seam separation and peeling on bends for two years. If the Alcantara comes off, we will reupholster it at our own expense.
07
How Alcantara interior reupholstery is done
Steps.
We explain how we turn your car's interior into a work of art in 6 simple steps.
01
Inspection and measurements
You leave a request on the website or by phone, we clarify the details and book you for a convenient time. The craftsman inspects the interior, records the condition of the elements, and takes precise measurements for future patterns.
request on WhatsApp
02
Material selection
You choose the color and texture of the Alcantara, as well as the application method — with edging or stretched.
inspection and diagnostics
03
Panel removal
We carefully remove the upholstery from the seats, door cards, and headliner so we can work with each element separately.
estimate before work starts
04
Cutting and sewing
Using special patterns, we cut and sew Alcantara covers, aiming for a perfect fit.
work to factory procedure
05
Base preparation
We clean the parts from old coatings and degrease them for reliable adhesive bonding.
result check
06
Assembly and inspection
We fix the new upholstery on the panels and seats, smoothing out wrinkles and aligning the seams. We put the panels back in place, check the quality of the seams and fastening, and perform a final interior cleaning.
Car service in Almaty. We reply on WhatsApp and by phone.
3 000 ₸Door trim removal
10 · Useful
Alcantara interior reupholstery in Almaty by CARGID specialists
Author: Аружан А.detailing specialist (mobile), 11 years of experience
Published Updated
CARGID reupholsters interiors in Alcantara in Almaty using patterns cut for the specific model: seats, headliner, steering wheel, dashboard, door cards, pillars and armrest. We stretch the material with heat up to 60 °C, lay three layers on the headliner, and stitch airbag zones with weakened thread. A 12-month warranty is written into the work order.
Which interior parts we cover in Alcantara
Alcantara upholstery doesn't have to mean the whole interior — you can cover individual parts or take a full set. Below we break down what a full trim includes and which options are available for each part.
What a full reupholstery includes and what you can take separately
A full reupholstery with us covers eight elements: front and rear seats, headliner, a full set of pillars, dashboard, steering wheel, door cards and armrest — you can take the whole interior or individual items. The service advisor records the chosen scope in the work order and manages the job through to handover. We cut the upholstery using patterns for the specific model, so the fit follows the factory contour rather than an average template. We provide photo updates at key stages. If your budget is limited, start with the seats and steering wheel — these areas wear out first, and it makes more sense to do the headliner and pillars as one set later so you don't pay for disassembly twice. For each element the specialist states the scope of work and the disassembly order in advance, so you understand what gets removed and in what sequence it goes back on.
Work options by interior part
Alcantara interior upholstery options by part
Part
Full cover
Combined option
What we account for
Front seats
fully Alcantara
Alcantara center, leather bolsters
nap direction, model patterns
Rear seats
fully Alcantara
Alcantara center, leather bolsters
cutting from a single batch
Headliner
Alcantara in three layers
—
glue, foam, Alcantara
Interior pillars
as a set
—
shade match with the headliner
Steering wheel
fully Alcantara
Alcantara and leather around the rim
wear from hands
Dashboard
fully Alcantara
Alcantara and leather along the edge
UV exposure
Door cards
fully Alcantara
Alcantara insert
matching with the seats
Armrest
fully Alcantara
—
wear from the elbow
How to choose the material and get the original right
We break down how original Alcantara differs from aftermarket options, how to check it on the spot, and what happens to the material on different parts under the Almaty sun.
Original, aftermarket and differences you can see on the spot
Alcantara is a microfiber made of polyester and polyurethane, and the original differs from aftermarket in density, nap depth and how it behaves on a bend, not just in price. The Italian material keeps its nap even, while Chinese and Korean aftermarket options are cheaper but flatten faster on the seat side bolsters. Unlike genuine leather, the upholstery has no pores and a distinctive velvety sheen, and unlike synthetic leather it has a live nap surface that changes tone when you run your hand against the nap. We lay out samples in front of the client and show the cut edge: the original has a dense backing with no looseness. Check the material on a fold — a quality fabric springs back without creases after being squeezed in a fist, while a cheap aftermarket leaves a mark, and this test can be done before cutting, while the fabric isn't on the part yet. If you're planning Alcantara interior reupholstery in Almaty, choosing samples on the spot like this helps you avoid overpaying for an aftermarket material.
How Alcantara behaves in the heat, part by part
On the steering wheel and dashboard, the nap surface heats up more under direct sun than on the seats and headliner, so these are the parts that need UV treatment and attention to the nap. The dashboard gets the most ultraviolet through the windshield, and without treatment the nap on it fades faster than on the door cards. The headliner and pillars barely heat up, but sagging shows more on them — three layers of glue, foam and material hold their shape. On the seats, most wear comes from getting in and out, not from the sun. The steering wheel gets shiny not from heat but from constant contact with your palms — the nap flattens, and steam cleaning, not reupholstery, helps restore the look. In our practice, we cover the steering wheel and dashboard in one day, remove only the steering wheel — the car drives away the same evening.
Shade mismatch and consistency with staged reupholstery
An owner's main worry is that seats and headliner covered at different times will differ in shade. We break down where shade mismatch comes from, how to prevent it, and how to combine Alcantara with leather without losing consistency.
Why shade mismatch appears and how to avoid it
Two causes of mismatch: the shade varies because of different material batches and different nap direction when cutting — it's immediately visible in the light.
Cutting from a single batch: we cut all interior parts using patterns from a single roll, so the seats, pillars and headliner match in tone.
Single nap direction: we lay the nap in one direction on all elements — when the viewing angle changes, the surface doesn't shimmer in patches.
Heating up to 60 °C: we heat the material with a heat gun so it lays down without light stretched areas or wrinkles.
Buying more later: if you get Alcantara for the door cards separately, bring a sample of what's already installed — the shade is matched more accurately by batch number than by color name.
How to combine Alcantara with leather without losing consistency
Combined trim works when Alcantara runs down the center of the seat and on the headliner, while leather goes on the side bolsters and edges where wear resistance matters. This layout stays practical: soft nap where your back makes contact, dense material where the interior rubs against jeans and zippers. We reupholster front and rear seats with this layout — Alcantara center inserts, leather side bolsters, a seam along the material boundary. On the headliner, Alcantara goes down in three layers — adhesive, foam, and fabric — and holds its shape without sagging. Don't mix materials randomly on a single part: the eye reads the interior as a whole, and the logic of "soft center, dense edges" feels natural, while random inserts look like a patch job. If you're choosing Alcantara for your car's interior along with leather elements, plan this layout in advance — the upholstery will last longer and won't look pieced together from different scraps.
Timelines, technique, and working with airbags
We break down how long each element takes, why we heat the material to 60 °C and lay the headliner in three layers, and how airbag zones are built into the upholstery.
Timelines by element and why the steering wheel and dashboard are done the same day
Steering wheel and dashboard: wrapped in one day, we only remove the steering wheel — the car leaves the same evening.
Headliner: takes longer because of full disassembly and three-layer installation — adhesive, foam, Alcantara.
Seats and pillars: time goes into removing the parts and heating the material at every curve.
Adhesive: dries faster than it seems, but the bond on curves gains strength over the first hours.
Foam: we replace it if the old foam has sagged or crumbled — otherwise the top layer will go on wavy.
Rushing: there's no point picking up the car early — peeling shows up exactly on the curves.
Stretching Alcantara without wrinkles
We heat the material with a heat gun up to 60 °C — at this temperature Alcantara stretches, and we wrap without wrinkles or creases on seats and pillars. Heating is done zone by zone: the technician warms a section, stretches it over the curve, and fixes it before the fabric cools. On flat surfaces the stretch is lighter, on radii and joints it's stronger, so the same part gets a different fit across sections. DIY work most often fails not at cutting but at stretching without heat — the material doesn't conform to the curve, and over time wrinkles appear in areas that can't be fixed without removing the part. Before work starts, ask whether the material is heated with a heat gun or stretched cold — that determines how the upholstery behaves after a season.
Airbags and the weakened seam
In airbag deployment zones we sew with a weakened thread — when the airbag fires, the seam splits and the airbag deploys without tearing the upholstery. This seam goes on the front seat side bolsters and on the pillars where the curtain airbag runs: the thread is weaker than the main one, so the upholstery splits along the set line instead of tearing at a random spot. From the outside, the weakened seam looks like a regular one, and after the work you can only check it from the inside of the part. So ask to see the zone before installation — the technician turns the part inside out and shows the stitching line. If the upholstery is already installed and the deployment zone wasn't shown, taking the seat apart again means a separate disassembly charge. That's why we document the stitching line in a photo report before installation — the photo shows the seam is weakened exactly in the deployment zone, not across the whole part.
Inspecting the work, warranty, and care
Before handover we check the seams, the stretch, and the interior mechanisms — it's worth going through the same checklist together with the technician. We explain what counts as a warranty case and how to care for Alcantara so it keeps its look.
Handover inspection checklist
Seams: check the stitching is even and there are no skipped stitches on the seats, pillars, and armrest.
Stretch on curves: run your palm over the seat and pillars — there should be no wrinkles or bubbles.
Mechanisms: fold and unfold the seats, check the armrest — the upholstery shouldn't restrict movement.
Airbag zones: ask to see the weakened seam before the part is installed.
Shade: look over the interior in daylight and in the evening, comparing adjacent parts.
Documents: check the warranty period and terms in the work order and the completion certificate.
What counts as a warranty case for peeling
The warranty on Alcantara reupholstery is 12 months, with the period and terms recorded in the work order and completion certificate, and warranty diagnostics are free. We cover the work performed and the material installed: if a bubble appears on a seat or pillar curve without external impact, the technician looks into the cause and reupholsters the part. The warranty does not cover mechanical damage, accidents after the repair, third-party intervention, or natural wear — material brought in by the client is checked separately. If peeling occurs on a curve, we first look at the cause rather than redoing it right away: often it's not the stretch but a snag from a zipper or belt. So record all remarks in the certificate at handover — it's easier to prove the defect didn't appear after you drove off.
How to care for Alcantara
Clean Alcantara with a soft brush and a neutral cleaner, and remove creases and shine on the steering wheel with steam cleaning — the nap lifts and the part regains its matte look. The material is polyester microfiber with a polyurethane coating, so dirt stays on the surface and doesn't soak in. Move the brush in the direction of the nap: that way you don't pull out fibers or create bald spots in visible areas. Refresh the parts with a UV treatment once a season — in the sun without it, the nap fades and roughens faster. Don't rub the nap against its direction and don't use harsh chemicals — they wash out the coating and the material loses its UV resistance. The steering wheel and armrest are the most heavily used zones: if the shine comes back a month after cleaning, it's time to renew the coating, not replace the upholstery.
Alcantara reupholstery: what to know before ordering
We've gathered the key things to keep in mind before ordering reupholstery: from choosing individual interior elements to inspecting the finished work at vehicle handover.
Not the whole interior at once: it's a set of jobs by element — seats, steering wheel, or dashboard can be done separately.
OEM vs. aftermarket: material is told apart by density and behavior on curves, not just by price.
One batch per part: shade differences come from different batches and nap direction, so cutting is done from a single roll.
Heating to 60 °C: a heat gun and a three-layer headliner are what separate work without wrinkles and sagging from a future redo.
12-month warranty: the period is recorded in the work order, and the handover checklist takes away the fear of a second visit.
11
Frequently asked questions about Alcantara interior reupholstery in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The cost depends on the scope of work and complexity. Reupholstering one row of seats in Alcantara starts from 30,000 tenge. A more accurate price can be given after inspecting the car, as the condition of old parts and the need for additional work are taken into account. We offer free diagnostics in Almaty and an accurate estimate before starting work. Exact prices are in the price list on this page.
Italian Alcantara (original) is considered the gold standard of quality: it is denser, more resistant to abrasion, and has a rich color. Chinese analogues are cheaper (from 5,000 tenge per meter), but their lifespan is 2–3 times shorter. We recommend using Italian Alcantara, as reupholstery is an investment for years. However, if the budget is limited, you can choose high-quality Korean Alcantara, which occupies a middle position in price and quality.
Reupholstering a headliner in Alcantara takes from 1 to 2 days. This includes removing the headliner, cleaning and preparing the surface, cutting the material, and installation. If the headliner has a complex shape (panoramic roof, sunroof), the term may increase to 3 days. In our service, we try to complete the work exactly on the agreed deadline, usually 1 full day.
Technically possible, but the risk of damaging the material and parts is very high. Alcantara requires special glue, tools, and experience. Any mistake in stretching or cutting will lead to defects that are difficult to fix. DIY reupholstery will save money, but the result may look unprofessional. We recommend entrusting the work to specialists who provide a warranty and use quality materials.
Regularly vacuum the interior with a soft brush. To remove stains, use special products for Alcantara — they are sold in auto stores. Do not use aggressive solvents or chlorine-containing compounds. Once a year, professional dry cleaning of the interior is recommended. If creases appear on the surface, they can be removed with steam cleaning. Proper care extends the material's lifespan up to 8 years.
High-quality Alcantara is resistant to UV radiation and high temperatures. However, in extreme heat (above +35°C), it is recommended to park in the shade or use sunshades. Prolonged exposure to direct sunlight can eventually cause color fading, especially in dark shades. Our materials have UV protection, which minimizes this risk.
Yes, this is a very popular service. Reupholstering seats in Alcantara refreshes the interior and improves comfort. We remove the old upholstery, prepare the foam (replace if necessary), sew new covers according to your model's patterns, and install them. The term is from 2 to 4 days. Exact prices are in the price list on this page.
Alcantara does not block airbags if installed correctly. We use weakened seams at the airbag deployment points so they can easily tear through. This is a critical point, so choose a service that has experience reupholstering cars with airbags. In our work, we always consider the manufacturer's requirements and check the functioning of the airbags after assembly.
A full reupholstery includes: seats (1st and 2nd row), headliner, pillars, door cards, armrests, sun visors, steering wheel, and gear shift knob (optional). We can also tint or upholster the dashboard. The cost includes removal of old materials, surface preparation, cutting and installation of Alcantara, and quality control. The term is 7–14 days.
Yes, we provide a 12-month warranty on all work. During this period, we will fix any defects related to our work for free: material peeling, seam separation, bubbles. The warranty does not cover damage caused by improper use (snags, cuts). We also recommend annual dry cleaning to maintain appearance.
12
Reviews of our Alcantara reupholstery
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Aibek
Toyota Camry
I had my Toyota Camry interior reupholstered in gray Alcantara. The specialist explained everything in detail and showed samples. They finished in 4 days as promised. The quality is top-notch; it feels like a new car. The price was 280,000 tenge, which I consider fair for such work. Thank you!
Dmitriy
Land Cruiser
Had the headliner done on a Land Cruiser 200. Material and workmanship are top-level. The stretch is even, no wrinkles. Done in 5 days while I was on vacation. It cost 450k, but I'm very pleased with the result. If needed, I'll come back.
Maria
BMW X5 had
My BMW X5 had boring black seats. I decided to add blue Alcantara for a sporty look. The guys did an amazing job! The interior now looks expensive and stylish. The stitching was a pleasant surprise. It's been six months, and everything is still great. The price of 300,000 tenge is justified.
Elena
Sportage
They did the headliner on a KIA Sportage; it was sagging and smelled of tobacco. They reupholstered it in black Alcantara and also replaced the sun visors and grab handles. The smell is gone, and the look is excellent. Everything is neat, no bubbles. It cost 180,000 tenge and took 2 days. Very pleased.
Sergey
Had the seats reupholstered on a Mercedes. They look like new. Very neat seams, the material is pleasant to the touch. They worked for 3 days, price 320,000. I recommend!
Gulnara
I ordered reupholstery of the Volkswagen Polo interior in beige. I wanted coziness and comfort. The team did it perfectly; I didn't even think it would look so beautiful. All parts fit precisely. Thanks for the patience and skill. The price was 220,000 tenge — an excellent investment.
Aidos
Көлігімнің салонын қайта қаптаттым. Ақ алькантара таңдадым. Жұмыс өте сапалы, бәрі рет-ретімен болды. Бағасы 280 000 теңге. Уақытында орындады. Рахмет!
Olga
RAV4
I spent a long time choosing where to reupholster my Toyota RAV4 interior. I settled on CARGID and didn't regret it. They did the seats and door cards in brown Alcantara. They work neatly, everything is clean. They met the deadline. The interior looks more presentable. I recommend. Price 250,000 tenge.
Viktor
Had the interior done in Alcantara, chose black with red stitching. It turned out great. The texture is pleasant to the touch, the seam is even. Done in 3 days. Cost 300,000. Satisfied.