Windshield Replacement with Mobile Service in Almaty
No need to go to a service center — we'll come to you and replace the windshield right in the parking lot or in your yard. We'll carefully remove the old one, install a new one using proper technology, and provide a warranty. We work all over Almaty, technician visit at a time convenient for you.
Windshield replacement with mobile service — price list
Prices.
We'll come to you, carefully replace the glass, and calibrate the sensors.
Service
Duration
Warranty
Price
Master's visit for diagnostics and assessment (within the city)
1–2 hours
12 mo
from 7,000 ₸
Removal of the old windshield without removing the trim
1–2 hours
12 mo
from 5,000 ₸
Cleaning and preparing the opening: removing old adhesive and rust
30–60 min
12 mo
from 3,000 ₸
Fitting and test-fitting the new glass before installation
30–40 min
12 mo
from 2,500 ₸
Installation of the new windshield using polyurethane adhesive
1–2 hours
12 mo
from 15,000 ₸
Replacement of the windshield seal (rubber)
30–60 min
12 mo
from 4,000 ₸
Installation of glass with a camera (adaptive cruise, safety systems)
2–3 hours
12 mo
from 25,000 ₸
Transfer of the rain and light sensor to the new glass
30–50 min
12 mo
from 5,000 ₸
Reattaching the rear-view mirror mount
20–30 min
12 mo
from 2,000 ₸
Replacement of heated glass (connection and testing)
2–3 hours
12 mo
from 20,000 ₸
Glass replacement on vehicles with sound insulation (removal/installation)
3–4 hours
12 mo
from 30,000 ₸
Urgent windshield replacement (arrival within 2 hours)
2–4 hours
12 mo
from 45,000 ₸
Trip outside the city (up to 50 km)
all day
12 mo
from 12,000 ₸
Home/work visit on weekends and holidays
2–4 hours
12 mo
from 8,000 ₸
Checking seam tightness and aftercare recommendations
20–30 min
12 mo
from 1,500 ₸
Prices are for labor only and do not include the cost of the glass. The final cost depends on the vehicle make and the complexity of removal. Warranty periods — see the page «Warranty»
06
Why drivers choose mobile windshield replacement at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
12MO
warranty on labor — the term is stated in the work order.
Warranty
Fast and Careful
All Over Almaty
01
Removal without removing the upholstery
The glass is cut with a wire along the adhesive seam; we do not touch the headliner or pillars. Interior clips and plastic remain intact.
02
We glue at +20 °C
We apply polyurethane adhesive at temperatures above +20 °C and cure according to the regulations. Below that, the compound does not polymerize and the glass holds weaker.
03
The work takes 3 hours
That's how long it takes for removal, cleaning the opening, test-fitting, and polymerization of the adhesive. After 3 hours you can drive; full seam strength is reached within a day.
04
12-month warranty on the seam
For two years we cover the tightness of the adhesive seam and the absence of leaks around the perimeter. If water gets under the seal, we will re-glue at our own expense.
07
How we install a windshield at your location
Steps.
We explain step by step: from your request to the moment you get behind the wheel with new glass.
01
Technician visit
You submit a request on the website or by phone, we clarify the make, model, and year of the car, and agree on a time. A specialist arrives with tools and new glass; we confirm availability in advance.
request on WhatsApp
02
Inspection and removal
We carefully remove the old glass, check the condition of the opening and the body for hidden damage.
inspection and diagnostics
03
Cleaning and preparation
We remove old adhesive, degrease and prime the edge so that the new layer applies perfectly.
estimate before work starts
04
Installation of new glass
We apply high-quality adhesive, carefully place the glass, and align it with the factory marks.
work to factory procedure
05
Leak test
We visually and physically check the fit, and adjust the position if necessary.
result check
06
Usage recommendations
We advise how long to wait before the first wash and trip so that the adhesive fully cures. We provide a warranty card, you accept the work and pay in a convenient way.
CARGID replaces windshields on-site across Almaty and up to 50 km outside the city: the technician comes to your yard, parking lot, or office. Removal is done with a wire without removing the trim, adhesive is applied at temperatures above +20 °C, the job takes 3 hours, and a 12-month warranty is recorded in the work order.
How we install a new windshield on-site
Mobile service follows the same shop technology, just at your location. Let's walk through the steps and explain why the seam holds just as well as in the shop.
Why mobile service isn't a makeshift job and what the technician brings
We bring the same kit to the mobile job as we use in the shop: a wire for cutting the adhesive seam, suction cups and supports, degreaser, primer, and polyurethane adhesive. Mobile work in Almaty doesn't differ in materials from work on a lift—only the address changes. Mobile windshield replacement in Almaty follows the same technology as in the shop, so the seam gains strength the same way. We apply polyurethane adhesive at temperatures above +20 °C and cure it according to the schedule: below that, the compound doesn't polymerize and the seam holds weaker. That's why in cold weather the technician first warms up the opening and the interior, and only then squeezes the adhesive from the tube. The evenness of the seam isn't checked by eye—after bonding, the technician runs along the perimeter and checks for leaks, and before handover the car goes on a test drive. We take photos at key stages—the client sees exactly how the opening and edge were treated.
Removal without taking off the trim and preparing the opening
We cut the glass with a wire along the adhesive seam—we don't touch the headliner or pillars, and the clips and interior plastic stay intact. This removal takes less time than removing the trim and eliminates the risk of broken fasteners that you'd later have to hunt for at salvage yards. After removal, we clean the opening of old adhesive and rust, degrease it, and prime the edge—if you skip this, the new seam will lie on an uneven surface and sealing will suffer. We test-fit the new glass before applying adhesive: we check the gaps around the perimeter and alignment with the body lines. Before installation, we show you the old glass and the condition of the opening—in our experience, rust under the weatherstrip is the most common cause of re-bonding if left untreated.
Timing, adhesive curing, and when you can drive
After booking, the main question is how long mobile windshield replacement in Almaty takes and when you can get behind the wheel. Let's break it down by steps and air temperature.
How long the replacement takes and what makes up the 3 hours
The job takes 3 hours—that's how long it takes to remove the glass, clean the opening, test-fit the windshield, and cure the adhesive. First, we cut the panel with a wire along the seam without touching the trim or pillars, then remove old adhesive and rust from the opening down to bare metal, test-fit the new part for gaps, and only then apply the polyurethane compound. The adhesive sets at temperatures above +20 °C: below that, the compound doesn't polymerize and the seam holds weaker, so in winter we schedule mobile visits with extra time for warming up. In our experience, mobile windshield replacement rarely goes beyond this timeframe. Plan your visit in advance: on a rusty opening, cleaning takes longer, and the technician will warn you about this before work begins according to the written estimate.
When you can drive and how to care for the seam in the first day
Speed and potholes: for the first day, avoid deep uneven spots and don't accelerate hard — a fresh seam doesn't like twisting loads on the body.
Washing: skip high-pressure machines and harsh chemicals around the windshield perimeter; pressurized water loosens the still-soft compound.
Temperature: don't aim the heater or AC vents directly at the glass; temperature swings expand the frame metal faster than the adhesive.
Protect the seam: don't slam the doors and don't park with one side up on a curb — body flex loads the edge.
Check: after a day, inspect the perimeter for leaks; if in doubt, come back — we diagnose warranty cases free of charge.
Color mismatch, choosing glass, and what to do about rework
Color mismatch is the most common fear before installation: owners worry the new windshield will noticeably differ from the side windows. Let's explain where the shade difference comes from, how we control it, and what we do if you're not satisfied with the result.
Why new glass may differ in shade
The shade depends on the batch, the type of athermal coating, and whether it's OEM or aftermarket — film from different manufacturers runs a few tones off. The athermal layer blocks part of the spectrum and gives a slight greenish or grayish tint, while a piece without the coating looks more neutral. Even two samples of the same brand from different batches sometimes differ by half a tone — that's normal for tempered laminated glass. A small difference between the new windshield and the side windows isn't a defect but a result of different batches; it only becomes a real issue when the part is clearly darker or has a different coating than stated. In my view, the difference shows up most on light-colored bodies and in bright sun — that's where it's worth comparing samples in advance.
How we check the shade at the test fit and what to do about a redo
We test-fit the part and adjust the gaps before gluing — if the shade or geometry doesn't match, the customer sees it before any adhesive goes on. The technician sets the windshield into the opening, checks the fit around the perimeter and the alignment with the trim and sensors, and only after the owner agrees applies the polyurethane. We record the choice in the work order: OEM, aftermarket, or the customer's own part — the decision is theirs. If a seam defect or misalignment turns up after installation, diagnosis for a warranty case is free, and the terms of any redo are recorded in the work order. Our warranty on the work is 12 months, and we write the term and conditions into the work order and the handover report. A tip from practice: ask to see a sample at the test fit in daylight — the shade is easier to judge than indoors.
Sensors, camera, and heating with mobile auto glass installation
Models with cameras and sensors are a common request for mobile replacement. Here's what we transfer to the new glass, where calibration is needed, and what the limits of a mobile visit are in terms of equipment.
What we transfer and connect to the new glass
We transfer the rain and light sensor, the adaptive cruise and safety system camera to the new part, and connect and test the heating elements in the wiper zone. We re-glue the rearview mirror mount so it sits securely. We also install a heated version on a car that didn't have one from the factory — but connecting the heating elements means working with the wiring, so our auto electrician handles those orders. Mobile auto glass installation with sensor and camera transfer takes care: we test every connection on site. After transfer we check the sensor for proper triggering and the camera for correct lane marking capture. We seat the sound insulation layer and the seal around the perimeter with no gaps, otherwise you'll get a whistle at speed. If camera calibration needs a stand that isn't available on a mobile visit, the technician will tell you in advance and suggest coming to the shop at 129 Mukagali Makataeva.
Glass and work options for different systems
summary of options and post-installation checks
Glass or work option
What we transfer and connect
What we check after installation
With heating
Heating elements in the wiper zone
Heating across the whole zone
With sound insulation
Acoustic layer, seal
Fit tightness around the perimeter
With camera
Cruise and safety system camera
Calibration on the shop stand
With rain and light sensor
Sensor on the new glass
Correct triggering
Seal replacement
New rubber around the perimeter
Seam tightness
Mount re-gluing
Rearview mirror mount
Secure mirror fit
Your own glass, warranty, and preparing the mobile location
The warranty, a part brought by the owner, and the condition of the opening decide how a mobile replacement turns out. Here's what the 12-month warranty covers, how we handle customer-supplied glass, and what to do about corrosion under the seal.
12-month warranty and what it doesn't cover
We give 12 months on glass replacement: we write the term and conditions into the work order and the handover report when the car is returned.
Work and parts are covered: the warranty applies to the operations performed and the components we supplied.
Accidents after repair aren't covered: an impact, a stone chip, or a crash is a new case, not an installation defect.
Third-party interference voids the warranty: if another shop or the owner re-glued the glass, we won't accept the claim.
Consumables and natural wear are excluded: wipers and seals wear out over time and from road chemicals by nature.
Customer-supplied glass — no warranty on the part: the owner is responsible for the quality of the part they bring.
Warranty diagnosis is free: if a seam leaks, we look into the cause at no charge.
Customer-supplied glass and a rusty opening — what we do
We work with customer-supplied glass, OEM or aftermarket — the owner chooses the type of part; the warranty covers our work but not the part brought in. Before gluing we inspect the opening: if there's corrosion under the seal, we clean the metal and prime it, otherwise the adhesive goes onto a loose surface and the seam will sag. With heavy rust the technician will warn you in advance: the seal may fail sooner than the standard term. He'll offer an option — local treatment or body repair of the edge. Preparing the mobile location is simple: a level surface and access to the car from all sides. Also, we apply the adhesive at temperatures above +20 °C, so in winter it's worth thinking about a heated bay or parking garage. In my view, it's more honest to show the rusty area right away than to explain a month later why the seam failed.
Mobile Replacement Timing and Warranty
We've gathered the main things that determine the outcome of a mobile replacement: the technique, timing, shade, work with electronics, and warranty terms — briefly in five points below.
The technique doesn't change: removal with a wire along the adhesive seam without taking off the trim, polyurethane adhesive at temperatures above +20 °C, a final tightness check.
Timing: removal, cleaning the opening, test fit, and polymerization take 3 hours, full seam strength builds over a day — protect the glass from sharp loads for the first 24 hours.
Shade mismatch: the shade depends on the batch and coating, and a test fit before gluing shows the difference in advance, while the glass isn't on adhesive yet.
Electronics: the rain and light sensor and the heating are transferred and tested on site, and the safety system camera sometimes needs calibration on a stand.
Warranty: 12 months are recorded in the work order and report, but the term doesn't apply to a part brought by the customer.
10
Frequently asked questions about on-site windshield replacement in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The price for on-site windshield replacement in Almaty usually ranges from 15,000 to 30,000 tenge. The final cost depends on several factors: the make and model of the car (complexity of removal, presence of sensors and cameras), the cost of the windshield itself (original, aftermarket, heated or not), and the distance for the on-site visit (within the city it's usually free or a small surcharge). Trips to the suburbs can add from 12,000 tenge to the price. You can get an exact quote after specifying the car model and type of windshield.
On average, on-site windshield replacement takes about 2-3 hours. However, the time may increase if the windshield has rain sensors, cameras, or requires additional adjustment. Also, some time is spent on cleaning the surface and waiting for the sealant to cure. We usually recommend not using the car for at least 2 hours after installation, and the sealant fully cures in 24 hours. We give exact timeframes before starting work.
We provide a 12-month warranty on windshield replacement work. The warranty covers the quality of installation (sealing, no squeaks or leaks) and the windshield itself if purchased from us. If problems occur during the warranty period, such as leaks or extraneous noises, we fix them free of charge with an on-site visit. The warranty does not cover mechanical damage (chips, cracks) after installation.
We recommend booking in advance to choose a convenient time and be sure that our technician arrives exactly on time. However, we try to accept without an appointment if there is an available slot. For on-site service, an appointment is mandatory because we need to coordinate the time and address. You can call us or leave a request on the website, and we will find the nearest convenient time. Same-day appointments are often possible within 1-2 hours.
Yes, you can install your own windshield if it fits the model and is in good condition. In this case, we charge only for labor and consumables (sealant, primer, degreaser). However, it's important to know that if the windshield has been used before, we cannot guarantee its full sealing and strength, although the work will be done with quality. If you are unsure about compatibility, it's better to consult with us in advance — we will tell you if your windshield is suitable.
If after replacement you find a leak, squeak, or the windshield is installed unevenly, contact us immediately. Under the warranty, we will come free of charge and fix the defects. The repair time is usually 1-2 days. If the problem is serious and requires reinstallation, we will also do it at our own expense. It's important not to delay contacting us to avoid damage to the electrical system or interior. We value our reputation and resolve all issues in favor of the client.
The differences mainly concern the materials used and additional work. Economy: a budget-brand aftermarket windshield is installed, work is performed standardly, without complex sensor calibration. Standard: a mid-quality windshield (usually Pilkington, AGC), high-quality sealants are used, and basic calibration of the rain and light sensor is performed if necessary. Premium: an original windshield or premium-class windshield, full calibration of all systems (cameras, sensors), careful adjustment, and additional anti-corrosion treatment of the edge. The price increases accordingly.
Yes, there are several important points. For the first 2 hours after installation, it is not recommended to move the car or wash it so that the sealant sets. Within 24 hours, avoid strong temperature changes and high-pressure washing. Try not to slam doors to avoid unnecessary vibration. After a day, you can use a car wash without restrictions. Also, it is not recommended to remove protective stickers until the sealant is completely dry.
You can pay for on-site windshield replacement in cash or by card directly to the technician after the work is completed. Cashless payment is possible via a payment terminal that the technician brings. The payment method depends on the order amount and the availability of a terminal with the mobile team. A receipt and closing documents are issued on the spot.
Yes, we travel not only within the city but also to the suburbs: Kaskelen, Talgar, Issyk, Kapchagay, and others. Travel within Almaty is free. We will announce the exact cost of the visit when placing the order. When traveling out of town, the technician takes all necessary equipment and materials, so the quality of work is no different from stationary repair. Exact prices are in the price list on this page.
11
Customer reviews of mobile windshield replacement
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Aslan
Sportage
I ordered a windshield for my Kia Sportage. The guys came right to my workplace and did everything in a couple of hours. The price was 185,000 tenge, as agreed. The glass fits perfectly, no wind noise. It was very convenient not having to go anywhere. Thanks!
Dmitry
I contacted them based on a recommendation. I needed to replace the windshield on my Nissan Qashqai after a stone hit on the highway. The technician arrived on time, carefully removed everything, and installed the new one. The price was 320,000 tenge, which is cheaper than at the dealer. Work was done with care, the rain sensor works.
Madina
Toyota Camry
The windshield on my Toyota Camry cracked after a cold night. I called a technician, and he arrived with a new windshield. They did everything quickly and with quality. A special thank you for explaining how long to wait before the first car wash. The price was 210,000 tenge, I'm satisfied.
Olga
I bought a used car with a cracked windshield. The guys replaced it right in my yard. New glass for Renault Duster cost 195,000 tenge. They worked carefully, cleaned everything. I recommend them if you don't want to go to a service center.
Svetlana
I ordered a heated windshield replacement for a Volkswagen Tiguan. The price, of course, is steep — 450,000 tenge, but the heating works perfectly. The technician arrived, installed it, and checked it. Everything is clear, no questions. I'm very satisfied with the result.
Ruslan
Replaced the windshield on an Audi A6, a crack leaked. Called a master, brought glass with heating. Did everything in 3 hours, cost 520 000 tenge. Quality is super, I wouldn't recommend other services to anyone.
Aigerim
Kia Rio
The windshield on my Kia Rio broke after hail. The guys came to my workplace and replaced it in two hours. The cost was 185,000 tenge, as they said on the phone. Very polite and careful technicians. Thank you very much!
Zhandos
I replaced the front windshield of my car because a stone hit it and it cracked. The technician came to my home and installed the new windshield. He did the work and checked everything. The price was 220,000 tenge. No complaints, everything is quality. Thank you!