We bring back a perfectly smooth surface and mirror shine to your rims. We remove scratches, scuffs, and corrosion marks that spoil the look of your wheels. We work with all types of rims — stamped, cast, and forged. After polishing, we coat the lip with a protective compound so the result lasts as long as possible.
Real prices for wheel rim lip polishing at the car service CARGID
Service
Duration
Warranty
Price
Inspection and diagnostics of wheel rim lips (condition assessment, measurements)
30 min
24 mo
Free
Sanding of the wheel rim lip with abrasive discs (1 wheel)
1 hour
24 mo
from 1 500 ₸
Polishing of one wheel rim lip with paste (without removal)
30 min
24 mo
from 2 000 ₸
Polishing of two wheel rim lips (without removal)
1 hour
24 mo
from 3 500 ₸
Polishing of a wheel rim lip with wheel removal (1 pc.)
1–2 hours
24 mo
from 3 000 ₸
Polishing of all 4 wheel rim lips (standard passenger cars)
3–4 hours
24 mo
from 8 000 ₸
Polishing of wheel rim lips with pre-washing and degreasing (4 pcs.)
4–5 hours
24 mo
from 10 000 ₸
Polishing of deep scratches on a wheel rim lip (1 pc.)
1–2 hours
24 mo
from 2 500 ₸
Polishing of wheel rim lips with edge alignment (1 wheel)
2 hours
24 mo
from 3 500 ₸
Polishing of lips on alloy wheels (1 pc.)
1–2 hours
24 mo
from 3 000 ₸
Polishing of lips on forged wheels (1 pc.)
2 hours
24 mo
from 3 500 ₸
Polishing of lips on stamped wheels (1 pc.)
1 hour
24 mo
from 2 000 ₸
Polishing of lips on large-diameter wheels (R18 and above, 1 pc.)
2–3 hours
24 mo
from 3 500 ₸
Polishing of lips on SUV wheels (1 pc.)
2 hours
24 mo
from 4 000 ₸
Polishing of wheel rim lips with complete tire removal (4 pcs.)
5–6 hours
24 mo
from 15 000 ₸
Polishing of wheel rim lips without tire removal (4 pcs.)
3–4 hours
24 mo
from 9 000 ₸
Express polishing of wheel rim lips (same day, 4 pcs.)
2–3 hours
24 mo
from 12 000 ₸
Mobile polishing of wheel rim lips (on-site, 1 wheel)
2 hours
24 mo
from 5 000 ₸
Polishing of wheel rim lips with protective coating (1 wheel)
3 hours
24 mo
from 4 500 ₸
Prices are in tenge, the final cost depends on the condition of the wheels and the type of car. We will provide an accurate estimate after inspection at the CARGID service in Almaty. Warranty periods — see the page «Warranty»
06
Why they choose wheel lip polishing at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
24MO
warranty on labor — the term is stated in the work order.
Careful Removal
Precise Masking
24-month Warranty
01
We polish in 3 stages
First washing and degreasing, then abrasive on scratches, then finishing. This way the lip shines, not just 'sanded'.
02
We remove deep scratches
We go over the scratch with abrasive layer by layer without cutting off excess metal. The lip is leveled, not left as a pit under the lacquer.
03
We do it in 1 day
Four lips with wheel removal — from morning to evening. Without removal — faster, because we do not spend time on dismantling.
04
24-month warranty
We cover the polishing itself: if the lip dulls or spots appear without impact — we repolish for free.
07
How wheel lip polishing is performed
Steps.
We describe step by step what will happen to your wheels — from request to pickup.
01
Inspection and assessment
You leave a request on the website or by phone, we select a convenient time and book you for polishing. The technician inspects the wheels: checks the depth of scratches, chips and corrosion to determine the complexity of the work.
request on WhatsApp
02
Washing and degreasing
We thoroughly wash and degrease the wheels to remove dirt, brake dust and old coating layers.
inspection and diagnostics
03
Masking areas
We tape off the hub, tire and valves so as not to damage them during polishing and not to introduce abrasive.
estimate before work starts
04
Coarse polishing
We start with abrasive paste and a hard pad to remove deep scratches and level the surface.
work to factory procedure
05
Finishing and mirror shine
We change the pad to a soft one and polish with finishing paste until a glossy mirror shine.
result check
06
Pickup and warranty
We remove the masking, clean the wheels from paste and check the polishing quality under light. We hand you the wheels with a shining result, give care recommendations and a warranty on the work.
Car service in Almaty. We reply on WhatsApp and by phone.
1 500 ₸Sanding of the wheel rim lip…
10 · Useful
Rim Lip Polishing in Almaty by CARGID in One Day
Author: Аружан А.detailing specialist (mobile), 11 years of experience
Published Updated
CARGID in Almaty polishes the lips of cast and forged wheels in three stages: washing and degreasing, abrasive treatment of scratches, and finishing. We do it with or without removing the wheel; four lips with wheel removal are completed in one day. We record a 24-month warranty on the work in the work order.
When a Rim Lip Needs Polishing
The lip is the outer edge of the rim that first meets curbs, sand, and road chemicals. We explain what signs show it's time to polish and when treatment will no longer restore a mirror finish.
What a Rim Lip Is and Why It Dulls
The lip is the outer edge of the rim that contacts curbs, sand, and road chemicals, so it loses shine faster than the rest of the wheel. Under a layer of dust and bitumen, the metal becomes covered with an oxide film, and fine abrasive particles leave a network of micro-scratches that scatter light and make the surface look matte. On Almaty roads in winter, salt and sand-salt mixture add to this, acting like sandpaper with every touch of the edge. It's not the metal itself that dulls but the oxidized layer and micro-scratches from sand; if they aren't removed with abrasive, any treatment will only smear dirt across the surface. After the oxidized layer is removed, the polished rim lip reflects light again and looks like a mirror.
Signs That the Lip Needs Polishing
Matte film: the surface doesn't reflect light; the shine is gone evenly across the entire lip, not in spots.
Network of fine scratches: thin lines from sand visible at an angle to the light source.
Cloudiness under light: the lip looks cloudy even though it feels and appears clean.
Deep scratches: catch a fingernail and require layered abrasive passes, not just a finishing paste.
Chips and gouges on the edge: we first level the edge, then bring out the mirror on the rest.
Peeling clear coat: a dark stripe is visible under the coating — the metal has started to oxidize under the film.
How the Three-Stage Polishing Works
We explain what our service consists of and why three stages produce a durable mirror rather than a rubbed surface that dulls in a month.
Washing, Degreasing, Abrasive, and Finishing
We work in three stages: first washing and degreasing, then abrasive treatment of scratches, then finishing — so the surface shines rather than just being rubbed. In the first stage, we remove bitumen and old clear coat residue; the degreaser removes the film that makes paste slip and not bite into the metal. The second stage is a hard pad with abrasive paste: it works on micro-scratches and oxidation, restoring an even tone to the lip. The third stage is a soft pad and finishing paste that brings the surface to a mirror without holograms. Skipping degreasing means grinding dirt into the metal with abrasive, so the first stage is not a formality but a condition for an even finish. In my opinion, it's the sequence of pads and pastes that distinguishes mirror polishing of a rim from a quick wipe, after which uneven tone appears a month later.
Why the Metal Won't Wear Away and the Lip Won't Dull
We remove only the oxidized layer and micro-scratches with abrasive, without cutting off excess metal, so a repeat treatment after a season won't thin the edge. The master controls the removal depth along the edge and flat surface: abrasive goes layer by layer, not in one spot, otherwise a pit would remain under the clear coat. After finishing, we cover the lip with a protective compound — it keeps the shine longer, but it needs to be renewed based on condition, not once and for all. In our practice, repeat treatment of the same lip is more often needed because of road chemicals and sand than because of metal wear. On cast wheels, protection is renewed for the season when roads are treated with chemicals: the compound takes on the chemicals and dirt, and the treated rim lip stays even.
Deep Scratches and Edge Leveling
Deep scratches and gouges on the edge are the most common reason for doubt: will the defect disappear completely or leave a pit? We explain how we level the lip layer by layer and protect adjacent areas of the wheel.
How to Remove a Deep Scratch Without a Pit Under the Clear Coat
We remove deep scratches by layered abrasive passes without cutting off excess metal, so the edge is leveled and no pit remains under the clear coat. First washing and degreasing, then abrasive on the damage, then finishing — so the surface shines rather than just looking 'rubbed'. We work the defect through several cycles with pastes of different grit and after each we inspect the area under directional light: we can see where a shadow still remains and where the edge is already brought out. We remove the step along the edge smoothly so the transition isn't visible from the side. Removing too much in one pass means creating a step around the damage that's noticeable under side lighting. That's why we work layer by layer and check the result at each stage, not just at the end.
Edge Leveling and Protection of Adjacent Areas
Hub masking: we cover the center so abrasive doesn't get on the brake disc and caliper.
Tire protection: film on the tire so paste doesn't soak into the sidewall.
Valves and sensors: we cover them separately to avoid damage during treatment.
Edge leveling: we remove gouges before polishing, otherwise the mirror won't lay evenly.
Two-tone paint: we treat only the lip; painted spokes remain covered.
Area control: after masking, we check the boundaries and only then turn on the machine.
With or Without Wheel Removal
We polish lips in two formats — directly on the car or with the wheel removed on a workbench. Below we explain how they differ in result and when to choose which so the set looks even.
How the Formats Differ and What to Choose
comparison of polishing formats by work location
Work format
Where we do it
When to choose
One lip without removal
on the car
spot removal of scuffing
Two lips without removal
on the car
a pair of wheels on one side
Lip with wheel removal
on the workbench
need an even rim all around
All 4 wheels with removal
on the workbench
a set without uneven tone
One Lip or All Four Without Uneven Tone
We can polish a single lip, but if the neighboring wheels are dull, the difference will show; so on a full set we recommend doing all four in the same format. We work in four scenarios — one lip without removal, two lips without removal, a lip with the wheel removed, and polishing the lips on all four wheels. Rim lip polishing in Almaty is available in any of these formats, and the technician will tell you which one suits the condition of your set. When the wheel is removed, the technician brings out the mirror shine on the bench, where the whole lip contour is visible, not just the accessible section. On the car without removal it's faster, but the viewing angle is narrower, and the far part of the lip has to be done blind. The mismatch in tone doesn't show right away — it shows in the sun after a wash — so it's better to agree with the technician up front how many lips are in the job rather than doing them one at a time.
Timing, warranty and care after polishing
How long the job takes, what the warranty covers, and how to care for the lips through an Almaty winter so the mirror shine lasts longer — we break it down point by point.
How long polishing takes
Four lips with the wheels removed we do in one day — morning to evening. When the wheel stays on the hub, the job goes faster, since removal and reinstallation don't eat up time. One lip without removal takes under an hour, while the "all four wheels" format with removal takes a full shift: washing, degreasing, abrasive over the scratches and the finish all go strictly in sequence, and each stage needs its own pause. The time depends on how deep the scratches are and the condition of the lip: the more layered passes, the longer the abrasive stage, so we give the exact time during the inspection. Book a morning slot — by evening the car is back on the road, and you won't have to leave it overnight.
What the 24-month warranty covers
We give a 24-month warranty on lip polishing and record the term and conditions in the work order and the completion certificate when the car is handed over. Twenty-four months is the same term as for body repair, painting, rustproofing and ceramic coating: the lip stays the shop's responsibility, not "done and forgotten." The warranty covers the work performed; it does not cover accidents, third-party interference, natural wear, or a part brought in by the customer, and diagnosis for a warranty case is free. If six months later the shine has gone patchy or dullness appears through no fault of yours — bring it in, we'll sort it out with no inspection fee. We put the conditions in writing at handover, so there's nothing to argue about later.
Caring for the lips through an Almaty winter
Washing without stiff brushes: a soft sponge and water rinse off the road chemicals without scratching the lip.
Protective coating as needed: we renew it when the shine fades, not by the calendar.
No harsh chemicals: acidic cleaners strip the protection faster than road chemicals do.
Drying it dry: droplets leave streaks, so wipe the lip right away.
Spring inspection: once winter is over, you can see whether it needs polishing again.
Soft washing instead of abrasives: a rag with sand scratches worse than road dirt.
Rim lip polishing: stages, format and warranty
We've gathered the key points that determine the result of lip restoration — from why the metal goes dull to choosing the work format and putting the warranty terms in the paperwork at handover.
The lip dulls from sand and road chemicals: as long as the metal under the scratches is intact, polishing brings back the mirror shine and there's no need to replace the wheel.
Three stages matter more than one: washing, abrasive and finish give a lasting shine, not a scuffed surface with a cloudy sheen.
Deep scratches are done in layers: the abrasive removes metal gradually, so the lip levels out and no pits are left under the clear coat.
The format is chosen by the task: the option with the wheel removed is more even around the whole rim, while on-car work is faster since you save on removal.
Timing and warranty are set in advance: four lips with removal are finished in a day, and the term and conditions are written into the work order and certificate.
11
Frequently asked questions about wheel lip polishing in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The price of wheel lip polishing at our service depends on the wheel diameter (R16, R17, R18, etc.), the degree of damage (scratches, chips, corrosion), and the type of wheel (cast or forged). Standard polishing of one wheel (without complex defects) costs from 8,000 to 15,000 tenge. If there are deep scratches or additional leveling is required, the cost may increase to 3,500 tenge per wheel. We provide the exact price after inspection — it is free.
Usually polishing 4 wheels takes 1 working day (8-10 hours). If the wheels are in normal condition, without deep damage, we can finish in 4-6 hours. In complex cases or with a large number of scratches, the time increases to 2 days. The exact time depends on the current workload — when booking, we agree on specific deadlines.
Yes, we provide a 24-month warranty for the service. The warranty covers the quality of polishing: absence of streaks, scratches, and uniform shine. If defects appear during the warranty period, we will repolish the problem areas for free. The warranty does not apply to mechanical damage after repair (impacts, abrasives) or exposure to chemicals.
We recommend booking 1-2 days in advance to guarantee a convenient time. On the day of your appointment, arrive at the service at the appointed hour. If you come without an appointment, we accept you in the order of the live queue — during peak demand hours, waiting may be required. You can book by phone or via WhatsApp.
Yes, you can use your own materials if they are suitable for your type of wheels. But note: if the result turns out to be poor because of your materials, the warranty does not apply. We use professional polishing pastes and pads that are safe for any coating. If you are not sure about your materials, it is better to trust ours.
If after the work you notice defects — streaks, insufficient mirror finish, unevenness — immediately inform us within 3-5 days. We are obliged to eliminate the defects for free under the warranty. Do not try to fix it yourself; this may worsen the condition. Call or come in for a re-inspection — we will fix everything.
Light polishing removes minor scratches and dullness and takes 2-3 hours per wheel. Deep polishing corrects chips, corrosion, and film damage, requiring more time and effort. Mirror polishing is the final grinding to maximum shine, often included in deep polishing. Our technicians will recommend the optimal option after inspection so you do not overpay for unnecessary operations.
For the first 3-5 days, avoid high-pressure washing and aggressive chemicals so the polishing can set. Then wash the wheels with mild car shampoos, without acid cleaners. Use wax or ceramic coating for protection (we can apply it after polishing). Once a month, inspect the wheels for scratches from stones. If minor defects appear, bring them in — we will perform maintenance polishing for a small fee.
Payment by a convenient method: cash, bank card (Visa, Mastercard, Kaspi Gold), via Kaspi QR code, or by transfer. We also work with legal entities — we provide a cash receipt and all documents. No prepayment is required, full payment after the service is provided. If non-cash payment is required, notify the manager in advance to prepare an invoice.
We perform wheel lip polishing on removed wheels — this is a mandatory condition for a quality result. We remove and install the wheels for free. We use a balancing machine to check geometry (optional). If balancing is needed after installation, tell us — we will do it with a 10% discount. It does not need to be removed from the car — our technicians will do everything.
12
What clients say about our rim lip polishing
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Azamat
Toyota Camry
Excellent wheel polishing on my Toyota Camry! There were deep scratches after driving on gravel, I thought only repainting would save it. The technicians did everything in one day, the quality is superb — the wheel is like a mirror. The price is 12,000 tenge, which is more than reasonable for such a result. I recommend!
Dmitriy
I ordered lip polishing on my Honda Civic. The wheels were matte, with scratches, not shiny at all. The guys at CARGID handled it quickly, in one day. They returned the car with wheels looking like new! The price is 9,500 tenge — pleasantly surprising. Thank you!
Gulmira
I went to the service on my friend's recommendation. On my Mercedes, the wheels were in terrible condition — brake deposits that could not be washed off with anything. The technicians cleaned and polished all four. Now they shine like they came from the showroom. It cost 18,000 tenge, they worked for two days. Very satisfied!
Serik
Forester
Wheel lip polishing on my Subaru Forester — just superb! There were traces of corrosion from winter chemicals. At CARGID they quickly removed all the rust spots and restored the surface. The price is 15,000 tenge, they worked for about two hours. Now the wheels look better than new. Respect to the technicians!
Aigerim
In autumn I hit a curb, and a terrible scratch appeared on the wheel. I thought I would have to replace it. Thanks to the guys from CARGID — they straightened it, polished it, and now it is not visible at all. The price is 16,500 tenge, they did it in three days, but it was worth it. I recommend it to everyone, do not fall for cheap tire shops.
Viktor
They polished the wheels on my Audi A6 well. There were minor scratches from brushes at the car wash. I made an appointment, arrived, picked it up the next day — everything was clear. The price is 13,000 tenge, the quality is good. I do not understand much about it, but the shine makes me happy. I definitely recommend it.
Nurlan
As a BMW owner, I am very demanding about details. After winter, the wheels were in terrible shape: deposits, small scratches. At CARGID they polished the lips — now everything is like from the factory. The price is 20,000 tenge for four wheels, they did it in two days. The technicians clearly know their craft. Thank you!
Talgat
Sportage
I changed the tires to new wheels; the old ones were in a sorry state. I decided to try polishing at CARGID on a Kia Sportage. They removed deep scratches and restored the shine. I paid 11,500 tenge, satisfied. The only thing is, it is better to book in advance — there is a queue.
Elena
I had the lips polished on a Nissan Juke. The technicians removed chips and scuffs that had accumulated over the years. The result exceeded expectations — the wheel shines like a New Year tree. The cost is 12,900 tenge, the time is one day. I recommend it to everyone, it is one of the best places in Almaty!