We repair chips and cracks in windshields without replacement. We inject a special polymer that restores the optics and strength of the glass. Repair takes 20-30 minutes, after polishing the chip site is almost invisible. We provide a warranty on the result.
We repair windshield chips and cracks without replacement: fast, neat, with a 12-month warranty.
Service
Duration
Warranty
Price
Diagnostics and damage assessment
10–15 minutes
12 mo
Free
Repair of a chip up to 5 mm (star-shaped type)
40–60 minutes
12 mo
from 7 000 ₸
Repair of a chip up to 10 mm (star-shaped type)
1–1.5 hours
12 mo
from 10 000 ₸
Repair of a chip up to 15 mm (with a crack up to 3 cm)
1.5–2 hours
12 mo
from 13 000 ₸
Repair of a crack up to 10 cm
2–3 hours
12 mo
from 15 000 ₸
Repair of a crack 10-20 cm
3–4 hours
12 mo
from 20 000 ₸
Repair of a crack over 20 cm (up to 40 cm)
4–5 hours (possibly 2 stages)
12 mo
from 30 000 ₸
Repair of a chip on tinted glass
1–1.5 hours
12 mo
from 12 000 ₸
Repair of a chip with surface polishing
1.5–2 hours
12 mo
from 14 000 ₸
Urgent repair (within 1 hour)
1 hour
12 mo
from 18 000 ₸
Visit to the client (Almaty and region)
on the day of request
12 mo
from 15 000 ₸
Repair of a chip on heated glass
2–3 hours
12 mo
from 16 000 ₸
Polishing of the entire glass after repair
30–45 minutes
12 mo
from 3 500 ₸
Sealing of the repair area (additional protection)
15–20 minutes
12 mo
from 2 000 ₸
Repeat diagnostics after repair (inspection)
10 minutes
12 mo
from 1 000 ₸
Removal of glue and tape marks after repair
20–30 minutes
12 mo
from 2 500 ₸
The exact cost depends on the type and size of the damage, as well as the vehicle make. Come for a free diagnosis — the technician will assess the work and give you the exact price before starting the repair. Warranty periods — see the page «Warranty»
06
Advantages of Chip Repair at CARGID
Warranty.
Every promise — backed by a number or a document: work order, photos, removed parts.
12MO
warranty on labor — the term is stated in the work order.
Fast (20-30 min)
Quality warranty
We work with any cars
01
3 Layers with UV Curing
We apply three thin layers, curing each with a lamp for 2 minutes. This fills microcracks and prevents the chip area from becoming cloudy over time.
02
Repair in 1 Hour
One chip up to 2 cm takes 40–60 minutes. You don't need to leave the car for the whole day — you drive away right after polymerization.
03
We Don't Drill the Chip
We do without drilling the edge. We don't weaken the glass, the chip point remains intact, and the crack doesn't spread further.
04
12-month Warranty
If a crack spreads in the repaired area, we redo it for free. We cover exactly that area, not the entire windshield.
07
How We Repair Windshield Chips: 6 Steps
Steps.
We explain step by step what happens to your glass from the moment you book until the car is returned.
01
Inspection and Diagnostics
You leave a request on the website or call us, and we agree on a convenient time for your visit. The master assesses the chip: size, depth, presence of cracks, and determines whether repair is possible.
request on WhatsApp
02
Surface Preparation
We clean the area around the chip from dust and dirt, and degrease it with a special compound.
inspection and diagnostics
03
Drilling and Filling
If necessary, we drill the cavity, then inject polymer glue under pressure.
estimate before work starts
04
Polymerization
The polymer hardens under a UV lamp in 15-20 minutes, filling the damage.
work to factory procedure
05
Grinding and Polishing
We remove excess polymer with a diamond burr, and polish the surface until completely transparent.
result check
06
Car Handover
We check the result against light and glare to make sure the chip is no longer visible. We return the keys, give care recommendations, and provide a warranty for the completed repair.
CARGID repairs windshield chips in Almaty without replacement and without drilling the edge. A single chip up to 2 cm takes 40–60 minutes; we apply the polymer in three thin layers with UV curing so the chip area doesn't turn cloudy. The work comes with a 12-month warranty, which we record in the work order.
When windshield chip repair is possible and when you need a replacement
The owner's biggest fear is paying for a repair and still having to replace the part a month later. Let's break down which signs mean the damage can be repaired and when you can't get by without a new part.
Signs that a windshield chip can still be repaired
limits of repair vs. replacement by damage type and location
Defect type
Sign
Repair or replacement
"Star"
Up to 2 cm, no branches
Polymer repair
"Bullseye"
Round, up to 10 mm
Polymer repair
Crack
Up to 10–20 cm, not on the edge
Repair with crack growth stopped
Defect at the edge
Branches reach the edge
Glass replacement
Damage in the sensor zone
In front of the camera or rain sensor
Glass replacement
When repair no longer makes sense and the glass needs replacing
We're honest about replacement when a crack has reached the edge, the damage sits in the rain or light sensor zone, or the cavity is contaminated with water and dirt. The edge is the most stressed part of the windshield: the polymer doesn't hold there, and the break keeps spreading even after filling. In the sensor zone, the optical layer of the compound distorts the signal, and the electronics start misjudging precipitation and light levels. A contaminated cavity keeps the polymer from bonding to the surface — trying to fill such a defect leaves a cloudy spot and doesn't stop the growth. That's why we start with diagnostics: we inspect the area under a lamp, check where the micro-cracks lead, and only then put together a written estimate. Work begins once the customer has approved the scope. In my view, diagnostics before repair saves more than the procedure itself costs: a break at the edge caught in time doesn't turn into a dangerous windshield on the highway.
How windshield chip repair works and why we don't drill the glass
We walk through the process step by step — from the initial inspection of the damage to the final polish. We also explain separately why we skip drilling the edge, even though this technique is still used in windshield repair.
Repair stages from diagnostics to polishing
Diagnostics: the service advisor inspects the damage under a lamp, identifies the chip type and depth, and records the boundaries in the work order.
Degreasing: we clean the chip area of dust, moisture, and adhesive residue so the polymer bonds and doesn't peel.
Polymer filling: we apply three thin layers of the compound under pressure, curing each with a UV lamp for 2 minutes — this fills the micro-cracks.
Polymerization: we fully cure the polymer with a UV lamp until the compound becomes clear and hard.
Sanding and polishing: we remove the excess, level the surface, and polish the glass to an even shine.
Backlight check: we inspect the treated area under a lamp and in reflections to see whether a visible boundary remains.
Why we don't drill the chip edge
We don't drill the edge — we don't weaken the glass, the chip point stays intact, and the crack doesn't spread further. Drilling leaves a micro stress concentrator that can start a new crack under load. The polymer compound penetrates the cavity under pressure and fills it without mechanically interfering with the glass structure, so the strength stays the same. That's exactly how windshield chip repair in Almaty works at our shop — we don't drill the edge. In our practice, skipping the drill gives a clean result on "star" and "bullseye" chips without the risk of chipping the edge. On tinted glass and heated glass we use the same method — we don't drill the edge, and we control the heating temperature of the area. Before starting, the technician shows the damage under a lamp and explains which part of the chip can be fully covered and where a barely noticeable mark will remain.
What will be visible after windshield chip repair
What worries the reader isn't the visit itself but the fear of getting a cloudy spot or a color mismatch. Let's break down how noticeable the repair spot is, what it depends on, and why the fill boundary doesn't turn cloudy over time.
Will a spot remain and how noticeable will it be
After the repair, a barely noticeable mark remains at the damage site that doesn't obstruct the view or cause glare in the sun. The polymer compound fills the cavity and micro-cracks, and we check the result in backlight and in reflections, verifying the driver's line of sight. In our practice, windshield chip repair most often gives exactly this result — clear optics, no cloudy boundary. On tinted glass and heated surfaces, the fill boundary reads a bit more clearly than on clear glass — the difference in refraction at the polymer-glass junction shows. How noticeable the spot is largely depends on the depth of the damage and whether dirt got into the cavity before the visit. That's why coming in early gives the best optical result: a fresh chip whose cavity hasn't taken in dirt fills more evenly, and the fill boundary is almost invisible. In my view, how quickly you come in is the main factor the driver controls.
Why the chip area doesn't turn cloudy over time
We apply three thin layers of polymer and cure each one under a UV lamp for 2 minutes — that's how micro-cracks get filled and the repair spot doesn't turn cloudy. The UV lamp starts polymerization through the full depth, and each layer sets evenly with no voids left inside. A single thick layer cures unevenly and shrinks, which over time creates a cloudy border. In our experience, overfilling the resin is the most common reason a customer comes back with cloudiness, even though the cavity itself was filled. Three thin layers with intermediate curing keep the optics stable: the fill border stays clear and doesn't spread. The technician picks the thickness of each layer based on the depth of the cavity, and on deep damage it's the layer-by-layer approach that gives an even result without internal bubbles.
Timing for windshield chip repair and booking
Here's how long it takes to restore one damaged spot, what the timing depends on, and how to get an appointment without waiting — including the option of a technician coming to your car.
How long the car stays at the shop
One chip up to 2 cm takes 40–60 minutes, and you don't need to leave the car all day — you drive off right after the resin cures. People choose the 1-hour urgent repair when the damage is fresh and no dirt has gotten into the cavity: then no extra edge prep or re-flushing is needed. If the chip has been sitting for a while, a cleaning and drying step is added to the work time, so the total gets longer. On tinted glass and on surfaces with a heating element, technicians are more careful with heat so they don't damage the wires or the film — that also affects how long it takes. In our experience, the longest part isn't the filling itself but checking the result under the lamp and polishing. Plan your visit so you don't pressure-wash the car for the first few hours after pickup — the resin needs time to reach full strength.
How to book and when a visit to the customer is possible
We're open daily 09:00–20:00, including weekends, by appointment — no lines, and a visit to the customer is possible across Almaty and the region. Your service advisor takes in the car: he records the damage, manages the work order through pickup, and sends you a photo report of the key stages. When booking, tell us the make, the size of the chip, and whether there's a heating element or tint — that way the technician prepares the right resin and lamp in advance. On a call-out, the light and dust conditions differ from the shop, so small chips in the sensor area are better handled on-site at the shop, where there's stable lighting and a clean zone. For larger damage with branches, a call-out is also possible, but the advisor will warn you if the case needs a lift or a stand. A morning appointment leaves more time for checking the cure.
Warranty on chip repair and what to do if the chip spreads again
A warranty on chip repair isn't a formality — it's the condition under which the technician stands behind the result. Here's what it covers and what to do if the damage spreads again after the repair.
What the 12-month warranty covers
warranty limits by type of work
What the warranty covers
What it doesn't cover
Work performed to fix the chip
An accident after the repair
Materials and sealant installed
Interference by third parties
Repeat diagnostics for a warranty case
Normal wear of consumables
Fixing a defect at the chip spot
A part brought in by the customer
How to tell the work was done poorly, and what we do
If the chip spreads again after the repair or a cloudy border appears, we do a free diagnostic for the warranty case and redo the work. Signs of a bad job are a crack running out from the spot, cloudiness on the treated area, or sealant peeling at the edge. The repeat diagnostic shows whether the crack has moved past the spot — that's what separates our mistake from new damage. We give a 12-month warranty on glass work and record the term and conditions in the work order and the completion certificate when you pick up the car. First, your service advisor checks the documents and sees whether the damaged area matches the one that was treated. In our experience, most "repeat" chips turn out to be a fresh stone hit near the old spot — and you can see that from the direction of the crack. On tinted glass and glass with a heating element, the inspection takes longer: damage is harder to see under the film and wires. Come in for diagnostics before the crack spreads beyond the spot — that way the redo stays within the warranty.
When a chip can be repaired without replacement
Here's the key stuff a car owner with a chip should remember: when the part can still be saved by repair, how long it takes, and what to check at pickup.
Chip up to 2 cm: damage away from the edge and the sensor area can be repaired, no need to replace the part — the glass stays original.
No drilling: we don't drill the edge, so the strength of the glass doesn't drop and the crack doesn't get a new place to grow from.
Three layers of polymer: we cure each layer under the lamp for 2 minutes, micro-cracks get filled, and the chip spot doesn't turn cloudy over time.
Timing: one chip takes 40–60 minutes, you don't need to leave the car all day — you drive off right after the cure.
12-month warranty: the term and conditions are recorded in the work order and certificate, and diagnostics for a warranty case is free.
10
Frequently asked questions about windshield chip repair in Almaty
Questions.
Price, timeframes, warranty, payment — 10 questions asked most often.
10
Didn't find an answer?
Message us on WhatsApp — a service advisor will reply within 5 minutes.
The cost of chip repair depends on the size of the damage and the complexity of the work. In our service, the price starts from 7,000 tenge for a chip up to 10 mm in diameter. If the damage is larger or has a star shape with cracks, the price can reach 15,000 tenge. We will give the exact cost after a free inspection. Exact prices are in the price list on this page.
The repair process itself takes from 20 to 40 minutes depending on the complexity of the damage. However, after completion, it takes about 30-60 minutes for the polymer to fully cure. Overall, you will spend about an hour with us. If the chip is complex, with multiple cracks, the time may increase, but we still try to finish within one day without the need to leave the car.
Yes, we provide a warranty for all types of glass repair — 12 months. The warranty covers cases if the repair was performed poorly and the damage increased or new cracks appeared. We use quality polymers that reliably bond the glass and prevent further crack propagation. If problems arise during the warranty period, we will perform a repeat repair free of charge.
We recommend making an appointment in advance by phone or via WhatsApp to guarantee a convenient time and avoid waiting. However, our service has an express repair zone, and if a master is available, we can accept you immediately. If you come without an appointment, the wait usually does not exceed 15-20 minutes. It's better to call an hour ahead and check for available slots.
As a rule, we do not recommend using materials purchased on your own. Polymers must be professional, with the correct shelf life and storage conditions. Our service uses proven compounds that ensure reliable bonding and transparency. If you still want to use your material, the master will first assess its quality and may agree, but in that case we are not responsible for the result.
If you notice that after repair the chip is growing or new cracks have appeared, come to us immediately. Under the warranty, we will fix the defects free of charge. The main thing is not to delay, as even a small crack can quickly spread across the entire glass. We will perform diagnostics to determine the cause: perhaps the chip was initially too large or had hidden damage. In any case, find solution.
Chip repair is performed if the damage is small (up to 2-3 cm in diameter), the cracks do not reach the edge of the glass, and the chip area is not in the driver's line of sight. Repair takes an hour, costs from 7,000 tenge, and preserves the factory glass, which is important for sealing and optical properties. Glass replacement is required for cracks longer than 10-15 cm, damage that reaches the edge, or if the chip is in the wiper area. Exact prices are in the price list on this page.
After chip repair, it is important to follow several rules: do not wash the glass for 24 hours, as the polymer must fully polymerize. During the first hours, try to avoid sudden temperature changes (do not turn on hot air blowing on the glass and do not park the car in the sun). In the future, protect the glass from sharp impacts (for example, when closing doors), but regular washing and use of wipers can be continued without restriction. After a day, the repair site will become completely transparent and strong.
Payment for windshield chip repair is made after inspecting the damage and agreeing on the cost. We accept cash and bank cards; for legal entities, non-cash payment is possible. The master gives the exact amount before starting work; it depends on the size and depth of the chip.
Yes, the size of the chip directly affects the cost and complexity of repair. For chips up to 10 mm, less polymer and time are required, so the price is lower. Larger chips, especially with cracks, require more thorough preparation, possibly drilling at the ends of the cracks to stop their propagation. This increases material consumption and work time, which affects the price. The quality of repair with the right approach remains high for any size, but the sooner you contact us, the simpler and cheaper the repair will be.
11
What clients say about our chip repair
Reviews.
We collect ratings on the website and on maps — we hide nothing.
4.8
872 reviews on the website 1 900+ ratings in total
Aigerim
A stone hit on the highway, an unpleasant chip on the windshield. I called CARGID, they scheduled me quickly. The master looked at it and said repair was possible. They did it in an hour, 9 thousand tenge. Now you can't even see where it was! Thank you so much, very pleased.
Dmitry
After winter I noticed a crack from a chip, went to the service. Diagnostics showed it could be repaired rather than replacing the glass. They worked carefully, stopped the crack, filled everything. The result is excellent, solved the problem for 18 thousand. I recommend!
Yerlan
The chip on the glass came from the previous owner. I decided to remove it so it wouldn't grow. At CARGID they did it quickly and efficiently. The price is pleasant — 7 thousand. A month later, nothing has changed, the glass is like new. Thank you!
Natalya
The trouble happened at the dacha, a stone hit the glass. I came, thought I'd have to replace it. The master reassured me, said they would fill it. An hour of waiting in a cozy lounge, and everything was done. I paid 9,000 tenge, very pleased. Now I advise my daughter to come here.
Sergey
I drove with a chip for a long time, then a crack appeared. I contacted CARGID on a friend's advice. They did it in two days, as the crack was large. The result is excellent, the crack is not visible. The price is 18,000, I think it's reasonable. Thank you for the work!
Maria
I got caught in hail, the glass was all chipped. I thought only replacement would help. I contacted the service, they said everything could be fixed. They filled three chips, I paid 12,000. It became noticeably clearer, the defects are almost invisible. Thanks to the masters for their patience and quality!
Arman
The car is new, and here's a chip right in front of the camera. I was worried the camera wouldn't work. At the service they reassured me, said the repair was safe. They did it carefully, the view is not affected. I paid 11,000. The result is super. I recommend to all drivers!
Vladimir
I spent a long time choosing a service, settled on CARGID based on reviews. I didn't regret it. The chip on the glass was fixed in a day, price 15 thousand. Now I'm not afraid of frost, the crack won't spread. Thanks for the honest diagnostics and quality repair.
Aliya
When warming up the car in winter, a crack appeared on the glass. I came to CARGID, the master checked and said it could be repaired. I paid 15 thousand tenge, done in two days. Now no defects are visible. Very satisfied!